LED ceiling light fixture

This selection is also available in our French store: Réglette LED plafond

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
LED ceiling light fixture
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Plan on one strip per surface to be lit: a short bar for a cupboard or a hallway, a long one above a worktop or a workbench. The ceiling LED strip light is fixed under the ceiling or as a surface-mounted fixture and gives a direct, even light along its whole length, with no dark zone between two points.

What is a ceiling LED strip light and what light does it give?

A ceiling LED strip light is a linear fixture fixed under the ceiling or against a wall, which lights a long area with direct light. It differs from the ceiling light, which is a single point, and from the spotlight, which is adjustable: the strip light covers a worktop, a hallway or a garage aisle in one go.

Strip light, ceiling light or ceiling LED spotlight: what is the difference?

The LED ceiling light sends its light from a central point and treats a whole room in diffuse light. The recessed or surface-mounted LED spotlight targets a precise spot: a worktop, a step, a picture. The strip light stretches the source, so that a single fixture lights a whole line, with no shadow gap between two points. To see the families, browse all Designix light fixtures.

What a linear ceiling light changes

Placed above a worktop, the LED bar removes the shadow of your body and makes cutting safer. In a hallway, it guides without dazzling. The ceiling LED tube, the LED neon and the LED strip follow the same logic: a continuous source rather than an isolated point. The result then depends on the colour temperature and the gap left between the fixture and the wall. See the full range of LED strip lights.

Which length of LED strip light to choose for your room?

The length is chosen according to the surface to cover and the space available: a short format suits a cupboard, a worktop or a narrow hallway, a 120 cm strip light covers a kitchen or a desk, and a longer model is used above a workbench or in a garage.

120 cm LED strip light: for which rooms?

This length follows most cooking and preparation surfaces, as well as a corner desk. The kitchen LED strip light is mounted as a surface fixture under the wall units when the ceiling is far away, or on the ceiling just in front of you to avoid the shadow of your body. A surface of more than two metres requires two bars or a larger format.

Two short strip lights or one long one: what to choose?

Two short bars are needed in an L shape, a stairwell or a hallway cut by a door, because each one lights its own portion. A single long bar gives a more even result on a continuous line. Avoid a bar that is too long in a small room: it lights the wall more than the floor.

Choosing the length and format of the strip light according to the room
Room or use Recommended format Type of light Point to watch
Hallway, entrance Short or medium bar Neutral white Do not place the fixture right against the wall
Kitchen, worktop Length close to the surface to be lit Neutral white Place the bar in front of you to avoid the shadow of your body
Garage, workshop Long bar or two bars Cool white Choose a protection rating suited to dust
Bathroom Model protected against humidity Neutral white Check the protection rating before installation
Cupboard, cellar, stairs Short format, sensor possible Cool white Check the range of the sensor

Where to install a ceiling LED strip light, room by room?

The strip light is placed where the lighting must stay even: on the ceiling above a worktop, a workbench or a car, and as a surface fixture under a wall unit. In a bathroom or a sheltered outdoor area, choose a model protected against humidity and dust.

Kitchen LED strip light: on the ceiling or under the wall units?

On the ceiling, it lights the whole surface and the floor, which is practical for moving around. Under the wall units, it highlights the worktop and makes food colours truer, without light in your eyes. The two locations complement each other: a bar under the unit for the task, a ceiling LED for the room. Compare the models intended for the bathroom if the room is damp, and the bars designed for a garage for a utility room.

Garage, workshop, cellar: where to place the LED bar?

In a garage, place the bar parallel to the car, never right above the open bonnet. In a workshop, the axis of the workbench comes first: the light falls on the work, not behind your shoulder. A cellar is handled with two points rather than one. The strip lights for workshop and workbench and the models for sheltered outdoor uses meet these situations.

Which IP protection rating to choose between IP20, IP44 and IP65?

The protection rating indicates resistance to dust and water. In a dry room, a simple model is enough. In a bathroom, a kitchen near the sink or a sheltered outdoor area, a higher rating is needed, and a waterproof IP65 strip light for damp rooms or areas exposed to splashes.

IP65 LED strip light: for damp rooms

Above a bathtub, near a sink or under a canopy, water and dust are part of everyday life. A protected model keeps deposits out of the fixture and is cleaned with a cloth. Look at the models rated IP65 and the waterproof versions against humidity for a laundry room or an open garage.

When an unprotected model is enough

A bedroom, an office, a dry hallway or a living room do not expose the fixture to splashes. A simple strip light is enough there, provided it is not placed right above a source of steam. If in doubt about a damp room, a waterproof strip light in a damp room remains the prudent choice.

Warm white, neutral white or cool white: which light for which room?

The colour temperature sets the mood: warm white relaxes in a living room or a bedroom, neutral white stays faithful in a kitchen and on a worktop, cool white gives a sharp light in a garage or a workshop. A single temperature per room avoids patches of colour.

Warm white, neutral white or cool white: which to choose?

Around 3000 K, the light leans towards amber and suits rest. Around 4000 K, it comes close to daylight and renders colours truly, which is useful in a kitchen as well as a bathroom. Around 6500 K, it contrasts more, which helps when working but tires the eyes in the long run in a living room. The useful reference remains the use, not the trend.

Mixing two temperatures in one room: the mistake to avoid

A bar at 6500 K next to a ceiling light at 3000 K creates two zones of different shades on the same walls. If you combine several fixtures, keep the same family of white everywhere, including for an LED lamp or a supplementary LED bulb. The difference is most noticeable on a white wall.

Colour temperatures and protection ratings: the quick reference
Reference Rendering Suitable rooms
Warm white 3000 K Soft, slightly amber mood Living room, bedroom, reading corner
Neutral white 4000 K Light close to daylight, faithful colours Kitchen, bathroom, hallway
Cool white 6500 K Sharp, contrasted light Garage, workshop, cellar
IP20 Limited protection, dry room Living room, bedroom, office
IP44 Resistance to splashes Bathroom, kitchen near the sink
IP65 Resistance to dust and splashes Damp rooms, sheltered outdoor area

How to install a 220V LED strip light on the ceiling?

A 220V strip light connects directly to the mains, like a ceiling light, with two wires and a switch. Mark the position before drilling, cut the power at the circuit breaker, fix the bracket into a solid material or a joist, then connect and put the bar in place.

220V LED strip light: wiring and switch

Connecting to the mains requires knowing how to identify live, neutral and earth, and working with the power off. If the cable outlet does not exist, creating a line is a job for an electrician. The strip lights connected directly to the mains are powered like a standard fixture, with no separate visible transformer.

Fixing the bar to the ceiling: joists, plugs, rail

In a plasterboard ceiling, find the frame or use a plug suited to the load; in a suspended ceiling, use the rail. The fixture is always fixed into a solid material or onto the frame, never into the plaster skin alone. An installer validates the fixing and the connection point before powering up.

Motion sensor or rechargeable model: which variant for which use?

The motion sensor switches the strip light on as you pass, which is practical in a hallway, a stairwell, a cellar or a cupboard. The rechargeable model is installed without a socket or wiring, for the duration of a job. These variants simplify installation but require checking the battery life and the range before choosing.

LED strip light with motion sensor: hallway, cellar, cupboard

The light comes on when you enter and goes off when you leave: no more looking for the switch with your hands full. For a hallway, point the sensor towards the walkway and not towards a window, whose light variations trigger the switch-on. Two options exist: the strip light that switches on as you pass and the 220V-powered sensor version.

Rechargeable LED strip light: when there is no socket

A cupboard, a shed or a cellar without electricity is equipped with a battery model, mounted with magnets or screws, then recharged as needed. It helps out without running a cable. Maintenance is limited to dusting the diffuser, as for any LED bar. See the rechargeable solutions without a socket.

Living room ceiling spotlight layout: how to spread the light?

In a living room, the living room ceiling spotlight layout is drawn from the uses: one point above the coffee table, another near the sofa for reading, without lining the spotlights up against the wall. A strip light completes this arrangement as accent lighting above a bookcase or a low unit.

Surface-mounted or recessed ceiling LED spotlight: which to choose?

The recessed one blends into the ceiling and suits when the ceiling height is comfortable. The surface-mounted one is installed without major work, is easy to maintain and is the obvious choice in an old ceiling or a drilled suspended ceiling. In both cases, a wide beam limits the number of points needed.

Matching strip lights, ceiling light and LED chandelier in a living room

An LED chandelier or an XXL pendant holds the centre and the mood; spotlights handle reading; a discreet bar highlights the bookcase. The wall mounting as a surface fixture replaces the bar when the ceiling is not suited to drilling. To widen the comparison, go back to the lighting pillar of the catalogue.

Strip light, ceiling light, spotlight or LED tape: which ceiling solution?
Solution What it lights Where it is placed To check
LED strip light A long surface, an aisle, a workbench Under the ceiling or as a surface fixture Available length and protection rating
LED ceiling light A whole room, in diffuse light In the centre of the ceiling Diameter, weight, fixing
Recessed or surface-mounted LED spotlight Targeted zones Distributed according to uses Number of points and layout
LED tape A continuous line, an accent Under a unit, skirting board, suspended ceiling Power supply and cutting marks
LED tube A utility room, a garage On a bracket or as a surface fixture Fixing and protection rating

Once the length and protection rating are settled, all that remains is to choose the colour temperature and the mounting method. The outdoor models waterproof against splashes complete a project that leaves the dry room.

Frequently asked questions about the ceiling LED strip light

Which powerful LED ceiling light to choose for a large room?

First look at the surface to cover and the mounting height: a diffuse ceiling light lights widely, an elongated strip light lights a precise surface. A powerful model placed alone in the centre often leaves dark corners, whereas two distributed sources give a more even light.

How to change a recessed ceiling LED spotlight?

Cut the power at the circuit breaker, remove the spotlight from its housing by pulling on the spring or the ring, then unplug the connector. Replace it with a model of the same size and the same power supply, reconnect, put it back in place and check that it is off before restoring the power.

Which fixture to choose with a ceiling height of 4 m?

With a height of 4 m, a pendant fixture or a large pendant brings the light down towards the living area and avoids a ceiling that stays dark. Adjust the pendant length so that the light point stays close to eye level, and complete with side sources rather than a single central point.

How does a cuttable LED tape work?

A cuttable LED tape has cutting marks that delimit sections powered separately. Cut only on these marks, never between two, otherwise the following portion no longer lights. Each section keeps its power supply, which makes it possible to adjust the length to the unit or the skirting board.

LED strip light or living room LED chandelier: what to choose?

The LED chandelier brings a decorative volume to the centre of the living room, the strip light brings an even light along a wall or a unit. Many living rooms combine both: a chandelier for the mood and a discreet strip light for the accent above a bookcase or a low unit.

Can a powerful LED wall light be used instead of a strip light?

Yes, if the wall is free and if the lighting must be projected downwards or forwards. The wall light lights more locally than a strip light, which covers a continuous line. It suits a hallway, a headboard or an entrance, provided the fixing and the protection rating are checked.

How to distribute LED spotlights on the ceiling of a small room?

In a small room, space the spotlights regularly starting from the useful zones rather than from the centre of the ceiling. Avoid placing a light point against a wall, which creates a patch and leaves the rest in shadow, and prefer a wide-beam model to several tightly spaced spotlights.

Do you need a modern LED ceiling light model for a contemporary living room?

A modern LED ceiling light with a simple design matches several furniture styles more easily and ages less quickly than a very pronounced shape. The material, the diameter and the colour temperature matter more than the trend: a discreet model goes well with a chandelier, a strip light or spotlights.

Our advice for choosing
The LED ceiling batten provides linear lighting, mounted under the ceiling or as a wall light. Depending on the length, colour temperature and protection rating, it suits a kitchen, garage, workshop, hallway or bathroom.