Blue LED string lights

Choose blue LED string lights first by their power supply and their protection rating: mains power for a fixed installation near a socket, batteries, rechargeable or solar for a balcony without an electrical point. Then measure the run to be covered, and fix the lights to a taut support so they do not sag under their own weight.

What kind of light do blue LED string lights give?

The blue of an LED is a cool, crisp light that stands out clearly on a pale wall as well as on foliage. It remains decorative: it highlights a line, a railing or a frame rather than lighting a room. For reading or moving around, rely on the main lighting, which is well covered by our full range of light fittings.

A cool light that stands out

On a white or beige wall, blue creates a sharp contrast and the light points read one by one, even from a few metres away. On dark wood, the effect is softer and the line appears less marked: it is a good support for a headboard or a shelf. On foliage, blue contrasts with the green and brings out the shape of the branches.

Blue white red mode, for celebrations

Some models alternate several shades on the same wire, with lighting sequences. Blue alone gives a calm line; blue white red is reserved for Christmas trees, parties and festive decorations, which you will find in all LED string lights. Check that the main colour stated matches what you are looking for.

Where to install blue LED string lights: living room, bedroom, balcony or garden?

Blue string lights go where they are seen but not touched: high on a wall, around a window, on a balcony railing, a pergola or a tree branch. Indoors, they dress a headboard or a shelf. Outdoors, the choice depends on the model's protection rating and on whether a socket is available.

In the living room, bedroom or a child's room

A window frame and a headboard are the two simplest spots: the lights follow a straight line, the cable slips behind the curtain or along the upright. Plan for a socket nearby and hide the cable rather than letting it cross a walkway. A shelf or the top of a piece of furniture also works, provided the lights stay out of reach of younger children.

On a balcony, a terrace or in the garden

On a railing or a guardrail, a classic string light is stretched from one post to the other and follows the line of the balustrade. On a pergola or a branch, aim for height: high enough not to be caught as you pass. A sheltered spot calls for a model protected against fine rain, such as IP44 string lights for a covered balcony.

Battery, rechargeable, solar or 220V LED string lights: which to choose?

The choice depends on whether a socket is available and on how long the lights will be on. Mains 220V suits a fixed, prolonged installation; battery or rechargeable versions can be moved and used where no socket exists; solar removes the cable but requires a panel exposed to daylight.

Mains or low voltage: for a fixed installation

On mains power, the lights stay on for a long time without intervention, provided a socket is close by. Measure the cable length to that socket before fixing anything: 220V mains LED string lights need this reference point. In low voltage, the transformer comes with the wire and must stay dry, under a canopy. 24V low-voltage models suit long runs.

Battery, rechargeable and solar: to do without a socket

Battery string lights can be moved and placed on a balcony without an electrical point. A rechargeable version is charged by cable, which avoids opening a compartment: see the string lights rechargeable by USB cable. Solar removes the cable, but its panel must see daylight; on short days, running time is reduced. cable-free solar string lights are made for a pergola or an open facade.

Which IP protection rating to choose for outdoor string lights?

The IP rating gives resistance to water and dust. IP44 withstands rain under a canopy or on a covered balcony; IP65 withstands splashes and direct exposure. A model without protection remains reserved for dry indoors, with a socket kept away from moisture.

IP44: covered balcony and window edge

An IP44 model accepts fine rain and a sheltered spot: under a canopy, against a window, behind a guardrail. It withstands neither direct jets nor immersion, so no cleaning with a hose. models protected against fine rain cover this common need on a city balcony.

IP65 and 24V: facade, pergola and garden

For a facade, a pergola or an exposed branch, aim for IP65: rain and splashes are fine, immersion is still excluded. In low voltage, the transformer is placed under shelter, never on the ground in the grass. IP65 string lights for outdoors are designed for this continuous exposure, including in winter, provided the connections stay out of water.

What length of string lights to plan before buying?

First measure the run to be covered, then the distance between the last point and the socket or fixing point. String lights can be laid in a straight line, in zigzags or in hanging loops, and zigzags use more length than a straight line. Better to allow a margin than to come up short.

Measure the run and the distance to the socket

Take a tape measure and follow the actual path, including fixing points, not the width of the wall. Add the distance to the socket, then a margin for the return and the fastening. This step avoids the classic case: string lights that are too short and stop in the middle of the railing. For a mains installation, see how to install string lights near a socket without a cable across the walkway.

Straight line, zigzag or hanging loops: what it changes

A taut line uses exactly the measured length. A zigzag between two points, or vertical hanging loops, require clearly more wire for the same distance: allow roughly double, depending on the size of the loops. This is the typical case of a pergola or a railing decorated with swags.

How to hang string lights without drilling and without damaging them?

Adhesive hooks, suction cups, gutter clips and small ties on a guardrail are enough for most installations. A steel wire is stretched between two points when the span is long, then the lights are fixed to it, so they do not sag under their own weight. The support must be clean and dry.

On a wall, a window or a piece of furniture

An adhesive hook holds on a smooth, degreased wall, a suction cup on a pane, a cable clip on a shelf. Clean and dry the surface before sticking, otherwise the adhesive gives way within a few days. The cable is fixed along the upright or behind the curtain. For the other lighting points in the home, our page on choosing a light fitting for the home gives the same installation guidelines.

On a balcony, a railing or a tree

On a guardrail, a gutter clip or a flexible tie does the job without drilling into the railing. Over a long span, stretch a steel wire between two fixed points and hang the lights on it: the wire carries, the lights decorate. On a living tree, wrap without nails or screws, letting the trunk breathe. Lightweight LED string lights are well suited to these quick fixings.

Blue LED string lights and room lighting: how to combine them?

Blue string lights remain ambient lighting: they replace neither a ceiling light, nor a wall light, nor a chandelier. They are switched on in addition, on their own power supply, to highlight a wall or a headboard. For reading or moving around, the main lighting must remain separate and available.

With a ceiling light, a wall light or a chandelier

The ceiling light provides general light, the string lights add a coloured line on a wall. A wall light illuminates a corridor or a bedside, the string lights do not take its place. A chandelier above a table keeps its role as a visual presence. Each source stays on its own switch: that is what allows the blue to be switched on without losing the useful light. Browse our selection of decorative light fittings to strike this balance.

Blue, warm white, multicolour: avoid mixing

One strong colour per area holds up better. Blue works on white and on light wood, away from another blue of a different shade that would create two neighbouring, discordant glows. If the room already has string lights in another tone, keep them in another room or on another wall. Multicolour is reserved for festive decorations.

Maintenance and safety of blue LED string lights: what to check?

Switch off the power before any handling, check the cable and the transformer, and keep sockets and connections out of water. A dry cloth is enough for dust; avoid solvents on the cable as well as on the LEDs. Damaged string lights are replaced rather than repaired.

Cleaning and storing without damage

Unplug, then run a dry cloth over the wire and the light points. No alcohol or detergent on the cable: the sheath becomes brittle. When storing, coil loosely, without tight folds or knots, in a box away from moisture. This is what extends the useful life of string lights from one season to the next.

What should raise alarm before switching back on

A nicked cable, a damp connection, a cracked transformer, a socket that heats up: in these cases, replace the string lights, do not improvise. Two sets of string lights are connected to each other only if the models are designed for it, with the same connector and the same voltage; otherwise each keeps its own power supply. An outdoor connection is never made with adhesive tape. For lasting exposure, prefer string lights resistant to splashes.

Unsure about the model or the length? Designix customer service answers before purchase. Secure payment, tracked delivery, returns, and a single contact for your installation questions.

• Secure payment
• Tracked delivery
• Returns
• Designix customer service

Frequently asked questions about blue LED string lights