Wireless rechargeable LED strips
This selection is also available in our French store: Rubans LED rechargeables sans fil
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Set the colour temperature first, then the length: around 2700 to 3000 K for a soft glow in a bedroom, a clearer neutral white above a worktop. On battery, the output stays modest: battery powered LED strip lights highlight a volume and serve as supplementary lighting, they do not light a room on their own.
- What light do battery powered LED strip lights give?
- Where to place a wireless LED strip in the home?
- Rechargeable or mains powered?
- Which format and length to choose?
- How to fix without drilling?
- Cuttable strip: how does it work?
- How to connect without a connector?
- Recharging and care
What light do battery powered LED strip lights give?
Runtime depends on the length of the strip and the brightness level, and a short strip gives less light than a full reel; the remote control lets you adjust the supplementary light without going back to the control box. On battery, the output stays measured: these strips highlight a volume, they do not light a room on their own. For reading or working, they complement a ceiling light, they do not replace it.
Battery powered LED strip lights: warm or neutral for a bedroom?
In a bedroom, a warm white around 2700 to 3000 K gives a light that does not wake you when switched on at night. This is the register of warm whites in 2700 K, placed at the headboard or behind it. A neutral white in this room makes the light harsher and breaks the evening atmosphere.
Battery powered LED strip lights with remote control: which settings day to day?
The remote control serves three gestures: switching on without getting up, lowering the brightness in the evening, freezing a colour. Multicolour RGB LED strips cover pure ambiance, while RGBW versions with adjustable white add a clean white, more accurate for lighting a wardrobe or a worktop. Check that the remote control is included and that the control box remains accessible.
Where to place a wireless LED strip in the home?
Place it where light is missing without any work: under a wardrobe shelf, behind a TV unit, at the headboard, above a worktop, in a hallway. Avoid very damp rooms without a suitable protection rating, and any surface that heats up, oven, radiator or extractor hood. A freshly painted wall is also among the bad surfaces.
Where to stick battery powered LED strip lights in a wardrobe?
Under the first shelf, at the front of the upright, to light the front of the clothes and not the back of the cupboard. A strip in neutral white light helps tell navy from black. Keep the control box high up, within hand reach for recharging.
Under a kitchen unit: good idea or mistake?
Good idea above the worktop, provided you keep the strip away from cooking steam and water splash zones. A battery model is enough for a short run; for a length that must stay on during preparation, look instead at 24 V low voltage LED strips, designed for continuous operation.
Rechargeable LED strip or mains LED strip: which to choose?
On battery, the strip moves and installs without an electrician: no cable to run, no socket to find. On mains, it runs continuously but requires a power supply and a connection. The choice comes down to the location: occasional and mobile, or fixed and prolonged. Neither dominates the other, they are not used in the same place.
| Criterion | Battery powered LED strip lights | Mains LED strip | Battery-operated LED strip |
|---|---|---|---|
| Power | Built-in battery to recharge | 220 V or 24 V with power supply | Replaceable batteries |
| Installation | Moves, no cable to run | Fixed, cable and socket required | Fixed, batteries to change often |
| Runtime | Limited, depending on length and brightness | Continuous as long as mains supplies power | Varies with the batteries |
| Damp room | Only with a suitable protection rating | Possible with a waterproof strip | Avoid near water |
| Maintenance | Regular recharging, dry cleaning | Check the connections | Opening the battery compartment |
| Typical use | Shelf, headboard, TV unit, wardrobe | Ceiling, staircase, long length | Small object, emergency use |
Wireless LED strip or 220 V LED strip: what difference at installation?
220 V requires running a power supply to the strip and housing a driver. Wireless removes this step, but you go back to recharging. If continuity matters more than mobility, compare LED strips to fix to the mains: the work is heavier at the start, the use simpler afterwards.
LED strip without batteries or with a rechargeable battery: what to check before buying?
Without batteries means without disposable batteries to buy again: the energy comes from a built-in battery that you recharge. Look at the charging method stated, cable or dock, and whether the battery block is removable. A rechargeable strip does not need a transformer, the battery takes its place.
Which format and length of wireless LED strip to choose?
Start from the surface to highlight. A short rigid strip, the 2-in-1 type of 60 cm, is enough under a shelf or behind a screen. A flexible reel of several metres dresses a long unit, a staircase or the perimeter of a room, and can be cut at the marked points. Measure before ordering, not after.
| Format | Where it fits | To check before buying |
|---|---|---|
| Short 2-in-1 strip of 60 cm | Under a shelf, behind a screen, in a hallway | Usable length and fixing method |
| Flexible reel of several metres | Long unit, staircase, ceiling, room perimeter | Cut marks and charging method |
| COB LED strip | Worktop, niche, bathroom mirror | Continuous rendering and protection rating |
| Profiled rigid strip | Stair tread, skirting board, frame | Dimensions and fixing clips |
60 cm 2-in-1 light strip or 5 m reel: which to choose?
The 60 cm strip installs in ten minutes and moves from one unit to another: it is the format for occasional supplementary lighting. The 5 m reel suits a continuous line, but requires more care during installation and needs recharging less often for the same surface. Flexible LED strips cover the second use.
COB LED strip or classic LED: what difference in rendering?
On a classic strip, you can see the light points when you look closely at the surface. COB gives a continuous line, with no visible grain, which matters on a worktop or a mirror. The difference is most visible at close range and on a reflective surface.
How to fix a rechargeable LED strip without drilling?
Without drilling, three solutions: the original adhesive on a smooth, degreased surface, clips or magnets where a screw is possible, or resting it behind a unit. Dust and new walls remain the two causes of peeling. Clean and let dry before sticking.
On which surface does the adhesive of an LED strip really hold?
On satin or gloss paint, after dusting and degreasing, the adhesive holds. On matt paint, limewash or recently redone paint, it lets go: prefer clips, magnets or an intermediate support, which peel off without tearing the wall. Varnished wood and painted metal are also good surfaces.
Where to place the control box of a wireless LED strip?
Slide it behind the unit, under the shelf, in the recess of an upright or in a trunking the colour of the surface. It must remain accessible for recharging and the remote control, and never be wedged against a surface that heats up. It is the most sensitive part of the installation along with the junction.
Cuttable LED strip: how does it work?
A cuttable strip has cut marks every few centimetres, often a group of LEDs. You cut only on these marks, flat, with clean scissors: the portion cut beyond the mark no longer lights, the rest of the strip keeps working. Measure twice before cutting.
Can you shorten an LED strip without breaking it?
Yes, provided you cut on the mark and not between two. A cut in the middle of a group interrupts the circuit and switches off the following section. Lay the strip flat, cut straight, without crushing the sheath or tearing the contact pads.
What to do with the cut piece?
It does not reconnect on its own: without accessible pads or a connector, it remains unusable. Keep it as a spare in case of an accident, or use it for a test before the final installation. Count the usable length before cutting, not after.
How to connect an LED strip without a connector?
Without an original connector, two methods hold: fine soldering on the copper pads, the most durable, or a terminal block or well-tightened piercing connector. You must respect the polarity, plus and minus marks, and insulate the junction, otherwise the contact heats up and the section switches off. Test before fixing.
Connecting two LED strips: soldering or terminal block?
The terminal block is quick and can be dismantled, but it holds poorly on a very thin wire. Soldering requires an iron and a little practice, it resists vibration and temperature variations. On a junction hidden behind a unit, solder: you will not go back to it.
How to avoid a bad contact after connection?
Strip short, tin the pads, respect plus and minus, then insulate with sleeving or electrical tape. Switch on before the final installation: a flickering point or a section switched off signals reversed polarity or insufficient tightening.
How to recharge and care for a wireless LED strip?
Recharge before the battery is completely empty, with the cable or dock provided by the manufacturer, without leaving the strip plugged in permanently. A dry cloth is enough for dust; avoid solvents on the sheath and moisture on the control box. The stated runtime corresponds to typical use, to be checked on the model's data sheet. Some competing models recharge by induction; a pack of two strips covers two zones without multiplying chargers.
How to recharge a wireless LED strip without damaging it?
Unplug the charger once charging is complete, do not pull on the cable to detach a connector, and let the control box breathe. A full cycle about once a month maintains the battery better than repeated short recharges. Store the strip unrolled, never in a tight ball.
Rechargeable LED strip in the bathroom: which protection rating?
Allow IP44 minimum for a zone away from water, more near a shower. Waterproof LED strips for damp rooms are designed for these environments; outside the damp zone, a standard strip is enough. For a pool, look at pool LED lighting, which meets other requirements.
Secure payment, tracked delivery, returns and Designix customer service: you order, you test, you send back if the length or shade does not suit. If you are hesitating between mobility and continuous operation, browse all our light fittings to compare the families before deciding, or go straight to the LED strip collection. For a fixed project over a long length, the simplest is to switch to a wired power supply and keep wireless for supplementary light. One last marker: all Designix light fittings are chosen first by the use of the room.
Frequently asked questions about battery powered LED strip lights
How long does the battery of battery powered LED strip lights last?
Runtime depends on the length of the strip, the brightness chosen and the mode: a short strip in night-light mode lasts much longer than a full reel at full power. The value stated by the manufacturer corresponds to typical use, to be checked on the model's data sheet.
Wireless LED strip with remote control: do you need a socket near the unit?
No, that is the point of the model: the built-in battery powers the strip and the remote control is used to switch it on, change the brightness or the colour. The socket is only used when recharging, so the strip can stay far from any power point.
Can you stick a rechargeable LED strip on a painted wall?
Yes on satin or gloss paint, after dusting and degreasing. On matt paint, limewash or freshly redone paint, the adhesive holds poorly: prefer clips, magnets or an intermediate support, even if it means peeling off without tearing.
Do battery powered LED strip lights give enough light to read?
Generally no: a battery strip gives ambiance or supplementary light, enough to highlight a unit, move around at night or light a shelf. For reading or working, it complements a ceiling light or a lamp, it does not replace it.
Do you need a transformer with battery powered LED strip lights?
No, the battery replaces the transformer: the strip is only plugged in to recharge, via the cable or dock provided. On a mains strip, however, the power supply or driver remains mandatory and must match the strip's voltage.





