Bamboo and wicker wall sconces

In a living room, a bamboo or rattan wall light serves as accent lighting: the weave filters the light and creates a warm halo on the wall without glare. Place them on either side of the sofa or above a low cabinet, often in pairs, with a bulb that is bright enough because the fibre absorbs some of the rays.

Living room wall lights: how to choose between bamboo and rattan?

Plan for two light points rather than one, positioned about 1.50 m from the floor, on each side of the sofa or above a low cabinet. The weave filters the light and replaces the table lamp on the coffee table, which takes up space and gives poor light. Choose a slightly more generous bulb than usual: the fibre absorbs part of the output.

Bamboo and rattan wall lights: what is the difference in a living room?

Bamboo gives smooth fibres and a light tone: the halo stays crisp and the light travels a little higher up the wall. Rattan, with its thicker, rounded strands, produces a more enveloping light and broader shadows. In a very bright living room, rattan structures the space better; in a dark living room, bamboo does not absorb light unnecessarily. Both combine very well with rattan and wicker wall lights to create a coherent series along a wall.

One or two wall lights on either side of the sofa?

Two, as soon as the seating has more than two places. A single wall light creates a visible imbalance and leaves an area in shadow; two are enough to read without turning on the ceiling light. If the room lacks sockets, look at lighting a living room with LED wall lights: some models connect to the existing wiring without adding extra points.

Using a wicker or bamboo wall light in the bedroom, on the stairs or in the hallway?

In an adult bedroom, a woven-fibre wall light replaces the bedside lamp and frees up the nightstand: fix it on each side of the bed, at shoulder height when seated, about 1.10 m from the floor. On a staircase or in a hallway, install them in a series along the climb to light each step without glare.

Which wall lights for an adult bedroom?

Look for low, warm light, directed downwards or widely diffused: a wall light that sends a direct beam into your eyes when you wake up is a bad choice. A model with a dimmer lets you lower the intensity in the evening without changing the bulb. To match the weave tone with the rest of the bedroom, compare LED wall lights for the bedroom before making your choice.

How to light a staircase with wall lights?

Install the wall lights in a series, at a constant height, about 90 cm above the step nosing to light the tread and not the face of the person coming down. The staircase is the only place where regular repetition matters more than the model: irregular spacing is immediately visible. Dressing a stairwell with simple shapes remains the clearest solution, and modern models for the hallway extend the same series at the bottom of the stairs.

Bamboo and wicker outdoor wall lights: what should you check?

Outdoors, bamboo and wicker last if the fixture is designed for it: check the protection rating on the product sheet, which specifies resistance to water splashes and dust. Under a covered terrace, an indoor model may be enough; in the open air, a specifically dedicated model is better.

Which protection rating for an outdoor wall light?

The IP rating is on the product sheet: IP44 covers water splashes and is suitable under an awning or a sheltered terrace; IP65 adds protection against water jets and dust, useful when the wall is exposed to rain. These two levels correspond to different uses, not a step up in quality. Compare IP44-rated models if your wall stays sheltered, and go up a level if water runs down it.

Bamboo and wicker under a covered terrace or in the open air?

Under a covered terrace, the fibres receive almost no water and age slowly: this is the ideal situation. In the open air, permanent humidity and sun eventually soften and then break unprotected strands. Look at outdoor wall lights for terrace and wall lights for terrace to identify models that clearly state their outdoor use.

How to match bamboo and wicker with an art deco, art nouveau or retro interior?

Art deco and art nouveau both play with line: wicker and bamboo fit in through their structure, geometric weave for the 1930s spirit, plant curves for art nouveau. For a retro interior, pair a natural-fibre wall light with amber tones and warm light, without mixing too many materials.

1930s art deco wall lights: what combinations with natural fibres?

The 1930s spirit relies on straight lines, angles and sharp contrasts. A regular, almost graphic weave fits better than an irregular one. Add a touch of black or gold metal in small amounts, for example on the socket or the backplate, rather than on the whole structure. A well-chosen retro wall light bridges the two eras without pastiche.

How to play art nouveau with a wicker wall light?

Art nouveau seeks the curve: a wall light whose weave draws scrolls or veins blends in naturally. Warm light highlights the relief of the fibre instead of erasing it. Avoid stacking several strong materials in the same room; vintage metal wall lights and natural fibres coexist well when the metal remains thin and discreet.

Which high-end design wall lights to choose?

High-end is recognisable by the regularity of the weave, the density of the fibres, the finish of the structure and the care taken with details such as the cable grommet or hidden fixing. An exceptional piece requires longer work; a more accessible model remains just as functional once installed and switched on.

What distinguishes a high-end design wall light

Look at the strands: tight, of the same thickness, with no visible gap against the light. Then look at the junctions, the wall plate and the way the cable disappears behind the fixture. A socket matched to the weave tone shows that no detail has been left to chance. Design LED wall lights brings together the most elaborate shapes, where the structure matters as much as the material.

Entry-level or exceptional piece: where is the difference?

It lies in the working time and the selection of fibres, not in the function: an accessible model lights just as well. The difference is visible up close, in the regularity and finish, and is felt in use, when the strands do not deform. If you are looking for a more rigid and graphic material, also compare design wood wall lights.

Bamboo, wicker, rattan or wood: what differences for a wall light?

Bamboo, rattan and wicker are woven fibres: bamboo is smoother and lighter, wicker is more supple and more veined, rattan is thicker and more enveloping. A wood wall light is more rigid and diffuses a sharper light. The choice depends mainly on the light you want and the room.

Does the weave change the light?

Yes, directly. A tight weave lets less light through and casts fine shadows; a loose weave lets broader bands of light through and marked shadows on the wall. The density of the weave therefore matters more than the colour of the fibre for the final result. For an entrance or a hallway, this wall projection matters as much as the fixture itself: wall lights for the entrance lets you compare available densities.

When to prefer a wood wall light?

When you want light directed upwards or downwards rather than diffused through the material, or when the room is damp and woven fibres require more attention. Wood also frames very graphic rooms with clean lines better. The rest of the catalogue can be browsed in all our light fixtures.

Which bulb and socket for a bamboo and wicker wall light?

Most wall lights work with an E27 screw socket, which leaves the choice of bulb: LED, filament or smart. Other models have integrated LED, with no bulb to change. For bamboo and wicker, warm light around 2700 K warms the fibres and softens the shadows of the weave.

E27 socket or integrated LED: which to choose?

The E27 socket lets you replace the bulb, change its power or colour temperature later, and repair the fixture without taking it down. Integrated LED imposes its output: no replacement, but a constant and often finer result to the eye. If you want to keep control of the mood, browse E27 wall lights.

Which colour temperature for wicker?

Around 2700 K, the light is warm: it warms light fibres and makes the shadows of the weave softer. Above 3500 K, the light becomes neutral and the weave loses its relief, especially on bamboo. To lower the intensity in the evening, models with a dimmer save you from changing bulbs depending on the time.

How to install and maintain a bamboo and wicker wall light?

Fix a wall light at shoulder height in a hallway, a little higher above a worktop, and at mattress level on each side of a bed. Clean with a dry or slightly damp cloth, without abrasive products or immersion, to preserve the suppleness and colour of the fibres.

At what height should a wall light be fixed?

In a hallway, allow about 1.40 m to 1.50 m from the floor so the light falls in front of you without glare. In a bedroom, align both wall lights at mattress level, at shoulder height when seated. Above a worktop, go higher and direct downwards. Mark the position before drilling and check the nature of the wall, solid or hollow.

How to clean bamboo and wicker?

Dust dry, with a soft cloth or a soft brush for tight weaves. If necessary, wipe with a very slightly damp cloth, then dry. Avoid abrasive products, alcohol and immersion. In a damp room, ventilate regularly; for very exposed areas, compare small wall lights for toilets or other suitable models. The rest can be discovered in our Designix light fixture catalogue.

Buy your model once the height and socket are confirmed: secure payment, tracked delivery, returns possible and Designix customer service for any question about dimensions or bulb compatibility.

Frequently asked questions