120 cm LED batten light

This selection is also available in our French store: Réglette LED 120 cm

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
120 cm LED batten light
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Start by measuring the length you need to light: a 4ft LED batten covers a worktop, a shelf or a short hallway in one go. This linear luminaire can be fixed to the wall or ceiling and is chosen on three practical points: light colour, ingress protection rating and power supply.

What light does a 4ft LED batten give?

A 4ft LED batten spreads a linear, even light from end to end, with no visible hot spot. Its colour depends on the model: 3000K for a warm mood, 4000K for a neutral white close to daylight, 6000K for a very crisp cool white. The diffuser softens the output and limits glare.

4ft LED batten 3000K: what atmosphere?

At 3000K, the light leans warm yellow, like a filament bulb. Fitted under a living room shelf or above a headboard, it lights without harshness and leaves whites slightly creamy. It is the colour that tires the eyes least in the evening, and the one that suits a light wood interior best.

Neutral white or cool white for working?

4000K renders colours close to daylight: handy for cooking, shaving or reading a plan. 6000K, bluer, sharpens contrasts and suits a garage or a workshop where you want to see clearly. In a living room, it cools the atmosphere quickly.

Colour temperature: which shade for which use
Shade Colour temperature Rendering Where to use it
Warm white 3000K Soft, slightly yellow light Living room, bedroom, dining area, under-cabinet
Neutral white 4000K Close to daylight Kitchen, bathroom, hallway, office
Cool white 6000K Very crisp, slightly blue Garage, workshop, cellar, storage

Where to install a 4ft LED batten in the home?

Under the wall units of a kitchen, in a hallway, a utility room, a dressing room or above a worktop, the 4ft batten lights a long, narrow line that spotlights leave in shadow. It can be fixed to the ceiling, under a shelf or along a wall.

Under kitchen units: the kitchen LED batten

Fixed under the wall unit, the batten removes the shadow your silhouette casts on the chopping board. A slim model in neutral white keeps food looking true and saves fitting a ceiling light for every task. For wet rooms, see instead the bathroom LED battens, designed for humidity.

Hallway and dressing room: the passages that lack light

In a narrow hallway, a single batten on the ceiling is often enough to get out of the gloom, without multiplying light points. Along a wardrobe, it makes clothing colours readable. For a workshop or a bench, go for the workshop LED battens, which are sturdier.

The wall LED batten is the right choice when the ceiling is already taken or too high to be practical.

Which type of 4ft LED batten for which room
Room or use Batten to aim for Ingress protection What it changes
Kitchen, under wall units Slim batten, neutral white IP20, dry room Lights the worktop without cast shadow
Garage, workshop Rigid batten, sealed housing IP44 to IP65 Resists dust and splashes
Bathroom Waterproof batten IP44 or IP65 Withstands humidity and splashes
Hallway, stairwell Batten with sensor IP20 Switches on as you pass, no switch within reach
Cellar, utility room, cupboard 220V or rechargeable batten IP20 to IP44 Lights a space without glare
Sheltered outdoor, covered terrace Waterproof outdoor batten IP65 Stands up to rain and temperature swings

Waterproof 4ft LED batten or IP65: which to choose?

A waterproof batten is closed by a cover and seals that keep humidity and dust out. The IP65 rating indicates protection against dust and water jets, IP44 against splashes. In a dry room, an open model is enough; in a garage, cellar or bathroom, sealing changes everything.

Waterproof 4ft LED batten: garage, workshop, cellar

In a garage, sanding dust and water splashes settle everywhere. A clip-on cover protects the light surface and comes off for cleaning. The waterproof LED battens are designed for this use, and garage lighting often calls for two units rather than one very powerful one.

IP65: what the rating really protects

The first digit covers solids, the second liquids: an IP65 stands up to total dust and water jets, but not immersion. An IP44 model is still enough away from the shower. To compare ratings, browse the IP65 protected models and the waterproof battens for damp rooms.

4ft LED batten with motion sensor: useful or not?

The infrared sensor detects movement and switches the batten on for a few moments, then off. It is installed where the switch is far away: stairwell, hallway, cellar, garage entrance. The timer and sensitivity settings are adjusted on the housing, depending on the model.

How does a sensor work on a batten?

A cell picks up the body heat of movement within a cone of a few metres. The timer sets how long the light stays on after the last movement, often adjustable from a few seconds to several minutes. Too wide a range triggers when the cat walks past: better to aim along the walking line.

For which passages does the sensor replace a switch?

Cellar stairs, utility room, technical cupboard, service entrance: all places where your hands are full and finding the button becomes a chore. Motion sensor LED battens solve the problem. If the existing circuit allows, a 220V powered sensor avoids the need for batteries.

4ft LED batten 220V or rechargeable: which wiring?

A 220V model connects to the mains, on a cable outlet or in place of an old luminaire, and is switched on by a switch. A rechargeable model is fitted without wiring and recharges by USB or mains: handy in a cupboard, a box room or an outbuilding without a socket.

4ft LED batten 220V: connecting to the mains

It replaces a fluorescent tube, a wall light or an existing light point, on the same supply. Switch off the power at the breaker before working, identify live and neutral, and tighten the connectors in the housing. 220V LED battens are the answer when an electrical line is already in place.

Rechargeable model: when there is no socket

A built-in battery makes it possible to fit on a new partition, in a lean-to or under a shelf far from any circuit. Runtime is counted in hours and charging is by cable. Rechargeable models suit secondary spaces, not continuous use.

How to fix a 4ft LED batten and get your ceiling LED lighting right?

Locate the fixings on the housing, screw the bracket, connect the wires before closing, then clip the diffuser on. On a ceiling, two screws are enough for a 4ft batten; when replacing a recessed spotlight, check the cable outlet and the diameter of the existing cut-out.

Replacing a recessed ceiling LED spotlight: what to check

The spotlight cut-out stays open if the batten is narrower: plan a cover or a bracket that covers it. Check that both fixing points land in the void or on a solid slab, and that the wires protrude enough. The whole of our lighting range is fitted using the same locating logic.

Batten, tube or 4ft LED fluorescent: what are the differences?

The batten is a complete luminaire, housing and diffuser included. The 4ft LED tube or fluorescent clips into the sockets of an old fluorescent luminaire, which saves dismantling everything but requires a compatible fitting. For a first installation, the batten avoids that search: see all LED battens.

4ft LED batten or LED ceiling light: which to choose for which room?

A batten lights a long, thin strip, a ceiling light spreads light in a circle around it. For a worktop, a hallway or a row of shelves, the batten is more accurate. To light the centre of a living room, a powerful ceiling light covers the surface better. For a living room LED chandelier, a central pendant hangs high enough not to get in the way, and it can complement a linear batten to light the sides.

Powerful LED ceiling light or several battens in a large living room?

In a large living room, a central ceiling light handles the whole space, then one or two battens highlight a bookcase or a picture wall. Stacking battens on a living room ceiling quickly creates an office-like linear effect. The whole of the lighting range as a whole is thought of in layers: general, then targeted.

Living room LED wall light or wall batten in a hallway?

A wall light throws light up or down and draws a cone on the wall: it dresses a hallway or a bedside. The wall batten, on the other hand, lights the whole length of a hallway without a break. The two complement each other in a long circulation, the wall light at the ends, the batten in the middle.

4ft LED batten or 150 cm: how to decide?

Measure the surface to be lit, not the power rating. A 4ft batten covers a standard worktop, a shelf or a short hallway. A 150 cm batten takes over on a longer row and avoids multiplying luminaires, provided the fixing spacing and the cable position work out. For a covered terrace, look at the outdoor LED battens, and for truly exposed use, the waterproof outdoor models.

How to maintain a 4ft LED batten and avoid faults?

A dry microfibre cloth is enough on the diffuser; avoid alcohol and abrasive sponges. Flickering often comes from a loose contact, a tired driver or a badly set sensor. A well-ventilated batten, with no insulation laid on top, keeps its brightness longer.

Cleaning the diffuser without damaging the plastic

Unplug first, then wipe without pressing on hot polycarbonate. A diluted glass cleaner is tolerated on a closed cover, never on an open circuit. Twice a year is enough in a kitchen, once a year in a hallway.

Why does my LED batten flicker or buzz?

A buzz often signals a loose connection or a driver at the end of its life. Flickering can come from a sensor whose timer is too short, or from an unstable supply. If the problem persists after tightening, replacing the luminaire is safer than an improvised repair. The rest of the catalogue is in the full range of LED battens.

Common questions about the 4ft LED batten

Can a 4ft LED batten be installed in a bathroom?

Yes, provided you respect the zones around the bath and the washbasin. In areas exposed to splashes, choose a waterproof IP44 or IP65 model and connect it with the power off. Outside these zones, a dry model is perfectly suitable.

Does a 4ft LED batten with a sensor need a switch?

The sensor replaces the manual control in passages: the batten switches on with movement. A switch is still useful to cut it completely, and some models offer timer or sensitivity settings. Check that the chosen model matches the supply available on site.

How do you replace a recessed ceiling LED spotlight with a batten?

Switch off the power, remove the spotlight and locate the cable outlet. The batten is screwed to the ceiling and connected to the same supply; the spotlight cut-out remains visible if it is wider than the housing. A cover or an intermediate bracket solves the problem depending on the model.

Cuttable LED strip: how does it work compared with a batten?

An LED strip is cut at marks provided for that purpose, then connected to a connector or a driver. It follows angles and curves, unlike a rigid 4ft batten. The batten is fitted in one piece, is easier to clean and keeps a straight line.

What is the difference between a 4ft LED fluorescent and a 4ft LED batten?

The LED fluorescent, or LED tube, replaces a fluorescent tube in an existing luminaire and clips into the sockets. The batten is a complete luminaire, housing and diffuser included, to be fixed to the wall or ceiling. For a first installation, the batten avoids searching for a compatible fitting.

How to choose, in short

First locate the available length and the nature of the room: dry, damp or dusty. Then set the colour according to use, and the power supply according to whether a circuit is present. This three-step sort avoids ordering mistakes. To compare shapes, browse all the lighting for the home.

Compare the available LED battens

  • Secure payment
  • Tracked delivery
  • Returns
  • Designix customer service

Unsure about the length or the ingress protection rating? Designix customer service answers before you order, and returns stay open if the fitting does not match the project.

Our advice for choosing
The 120 cm LED strip light is a linear luminaire measuring one metre twenty that provides a long, even band of light: worktop, shelf, hallway, row of tools. This collection brings together models for wall or ceiling mounting, in dry, waterproof, motion sensor or rechargeable versions depending on the variant.