90 cm LED batten light

This selection is also available in our French store: Réglette LED 90 cm

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
90 cm LED batten light
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Allow 90 cm of linear light to cover a worktop or workbench, fixed to the ceiling or wall a short distance from the surface. A 3ft LED batten replaces a fluorescent tube and works wherever light needs to follow a line: kitchen, garage, workshop, hallway, pantry. You choose it first by its white temperature, then by its protection rating.

What is a 3ft LED batten and what is it for?

A 3ft LED batten is a slim linear light, fixed to the ceiling or wall, that replaces a fluorescent tube and lights a long surface: worktop, workbench, hallway, pantry. It comes as a complete unit, bracket and diffuser included, or as a tube alone to clip into a bracket already in place.

3ft LED batten: the format that replaces a fluorescent tube

The profile is flat, a few centimetres thick, so it lets light through without eating into ceiling height. It is mounted on the ceiling for general lighting, or as a wall light in a hallway or on a staircase. 90 cm is the format that frames a standard worktop; on a longer line, several modules are aligned, or you look at a 120 cm LED batten or a 150 cm LED batten to avoid interruptions.

90 cm LED tube or complete batten, what is the difference?

The tube alone comes with its pins (G13 cap on a T8 tube, G5 cap on a T5 tube) and clips into a bracket already screwed to the ceiling. The complete batten includes the bracket, the terminal block and often a diffuser: it is fixed then wired directly. If the old fluorescent tube is still in place, the tube is enough; for a new installation, the batten saves buying a separate bracket. To compare the two approaches, browse all our light fittings.

Which light to choose for a 3ft LED batten?

The white temperature sets the mood: around 3000 K the light is golden and suits hallways, bedrooms and walk-in wardrobes; towards 4000 K it becomes neutral, comfortable for cooking or DIY; above 6000 K it is cold and high-contrast, suited to the garage, cellar or outdoors. The colour rendering is chosen before the wattage.

Warm white 3ft LED batten: for which rooms?

A warm white 3ft LED batten warms light wood and walls painted in soft tones. It goes in a walk-in wardrobe, a hallway, a bedroom or a bathroom, as a complement to a central light. It serves as accent lighting, not as task lighting: for long reading or cooking, the golden tint tires the eyes faster. Models for damp rooms are found among the models for bathrooms.

Neutral or cool white for a kitchen or garage

Neutral white (around 4000 K) remains the best compromise for a kitchen LED batten: food keeps its colour and the eye does not tire during preparation. Cool white (6000 to 6500 K) deepens contrasts and makes details sharp, which helps on a workbench or in a garage. Be careful not to shine light directly into your eyes when working standing up: aim the fitting at the surface, not at the face.

Warm white, neutral white, cool white: which rendering?
Temperature Perceived rendering Typical rooms Good to know
2700 to 3000 K Golden light, cosy mood Living room, bedroom, hallway Pairs well with wood and warm fabrics
4000 K White close to daylight Kitchen, workshop, office Good compromise for cooking, reading and DIY
6000 to 6500 K Bluish white, very high contrast Garage, cellar, outdoors Accentuates shadows and cools colours

Where to install a 3ft LED batten?

It goes where light needs to follow a line: under the wall units of a kitchen, above a workbench, along a hallway, on the ceiling of a garage or pantry. The 90 cm length covers a worktop; for a whole room, several aligned battens avoid shadow areas.

Under kitchen units and above the worktop

Fix the fitting under the wall unit, set back a few centimetres from the edge so the light falls on the worktop and not in your eyes. A kitchen LED batten with a switch saves running a cable to the wall: you only light the prep area. For a damp room or a tiled wall, also see mounting as a wall light.

Garage, workshop, cellar: lighting without shadow

In a garage, the batten is fixed to the ceiling, perpendicular to the entrance wall, to light the bonnet and the floor without cast shadow. On a workbench, two aligned modules are better than one: the light stays even along the whole length. Find tips for lighting a garage and solutions to light a workshop in our dedicated selections.

Which 3ft LED batten for which room
Room or use White temperature Protection to aim for Point of attention
Kitchen worktop Neutral white (4000 K) IP20 under unit Avoid light in the eyes when working standing up
Garage Cool white (6000 to 6500 K) IP20 in dry areas, waterproof if damp Fix out of reach of splashes
Workshop, workbench Neutral to cool white IP20 Align the battens to remove shadows
Bathroom Neutral white IP44 minimum Damp area: choose a waterproof version
Porch, sheltered outdoors Cool white IP65 Check that the fitting stays under cover
Cellar, pantry, hallway Cool or warm white IP20 Detection saves searching for the switch

Waterproof or IP20 3ft LED batten: how to choose?

The IP rating indicates what the batten resists. IP20 is enough in a dry room: kitchen, office, hallway. IP44 withstands splashes, useful in a bathroom or under a canopy. IP65 resists dust and water jets, which makes it suitable for a damp garage, a porch or sheltered outdoors.

IP20, IP44, IP65: what the number means

The first digit concerns solids, the second liquids. An IP20 does not fear household dust but withstands no drop of water. An IP44 accepts splashes, not a direct jet. An IP65 stands up to jet cleaning, which does not allow immersion. For wet rooms, compare the waterproof versions before making your choice.

Bathroom and outdoors: protected models

In a bathroom, the batten is placed outside direct splash zones, away from the bath or shower, and in a protected version. Outdoors, it must stay under a canopy or roof overhang, even in IP65. Check further with an IP65 protection rating and the references of a waterproof batten.

3ft LED batten with switch: how does it work?

A built-in switch cuts the power directly on the batten: handy in a cupboard or above a worktop, without touching the wall. The motion sensor switches on as you pass, useful in a hallway or pantry. The rechargeable version goes where no socket is available.

Built-in switch, motion sensor or remote control

The switch on the fitting suits occasional use: you light the useful area, then leave. The sensor makes sense in a passage, a cellar or a storage room, where your hands are full. The remote control adds adjustment without extra wiring. Our selections switching on by detection and detection powered at 220 V show both setups.

Rechargeable batten: when there is no socket

Under a garage shelf, in a cubbyhole or a cupboard without a circuit, the battery saves running a line. You take it down to recharge it, then put it back. Check the stated battery life and the mounting method before choosing, especially if the fitting must stay high up. See the models with no socket nearby.

How to install and wire a 3ft LED batten?

Switch off the power, mark the axis, drill with a plug suited to the surface, then screw the bracket before wiring the cables to the terminal block. Models designed for 220 V connect directly to the mains, without a transformer. Close the diffuser and restore the power once everything is fixed.

Fixing to the ceiling or wall: the right moves

First draw the axis in pencil and check alignment with a level: a batten mounted askew is immediately visible on a smooth ceiling. The plug depends on the surface: plaster, concrete or panelling do not call for the same fixing. Drill at the profile's hole spacing, screw the bracket alone, then clip the fitting on. For a vertical mount, see wall light mounting.

Wiring at 220 V: the precautions

Switch off the circuit breaker at the board, not just the switch. Identify live and neutral, tighten the wires in the terminal block and check they hold before closing. A 220 V batten connects without an external transformer; the model's data sheet is what counts, not the length of the fitting. The references to connect to 220 V group this type of setup. Once the length and temperature are confirmed, all that remains is choosing the switching method.

How to maintain a 3ft LED batten?

With the power off, a soft slightly damp cloth is enough to remove dust from the diffuser; abrasive products and scouring sponges dull the plastic. Also check the fixings and the condition of the power cable. A clean, well-screwed batten keeps even light for longer.

Two mistakes damage a linear light: cleaning while powered and spraying directly onto the terminal block. On a model installed in a kitchen, cooking grease settles on the diffuser and dulls the output: a regular wipe with a damp cloth saves having to take it down. If one end darkens or flickers, switch off the power and check the wires are tight before blaming the fitting. The rest of the Designix light fitting catalogue follows the same habits.

Batten, ceiling light or LED strip: which source for which room?

The batten lights a long, even line, the ceiling light diffuses from the centre of the room, the wall light dresses a wall and the LED strip highlights a niche or a piece of furniture. For a worktop or a workbench, the batten remains the most direct; for a whole room, the ceiling light takes over.

Batten, ceiling light or wall light: which source for which room

An LED ceiling light covers a square kitchen or a living room, but lights a long worktop poorly: it leaves a shadow in front of whoever is cooking. The wall light lights at grazing angle, useful in an entrance or on a staircase, insufficient for working. The most common is the combination: a central light for mood, a batten for the task. The fittings in all our light fittings for the home read in this logic.

LED neon, LED bar, LED strip: the words behind the same family

LED neon refers to the rigid batten that takes the shape of the old fluorescent tube. The LED bar is a similar linear profile, often slimmer. The LED strip is flexible: it sticks, cuts at marked points and connects to a dedicated power supply. None extends indefinitely. Rigid battens are compared in the LED batten family.

For a porch, a canopy or a covered facade, turn to outdoor lighting, and to references designed for an exposed exterior if splashes are frequent.

Frequently asked questions

Can a 90 cm LED tube be used for an aquarium?

No: a domestic light batten is not designed to work submerged or in permanent humidity. An aquarium requires a dedicated fitting, designed for the damp environment and for the spectrum expected by plants or fish. For a tank, look for aquarium equipment rather than adapting a standard 90 cm batten, even a protected one.

Cuttable LED strip: how does it work?

A cuttable strip has cut marks at regular intervals: you cut only on these marks, otherwise a section stops working. It sticks or screws on, connects to a suitable power supply and does not extend indefinitely. Cutting never allows adding metres, only removing an unnecessary portion.

Do you need a transformer to install a 3ft LED batten?

Battens designed for 220 V connect directly to the mains, without an external transformer. Rechargeable models carry their own power supply and are installed without wiring. The chosen model's data sheet indicates the connection method, not the length of the fitting. If in doubt, the 220 V mention on the packaging settles it.

Warm white 3ft LED batten: in which rooms to install it?

Warm white, around 3000 K, gives a golden light that suits hallways, bedrooms, walk-in wardrobes and bathrooms. Placed above a worktop, it warms wood tones and light walls. For long cooking or DIY sessions, a neutral white remains more comfortable and less tiring for the eye.

3ft LED batten with switch, how does it work?

The built-in switch cuts the power directly on the batten, without going through the wall switch. You choose this model for a cupboard, a pantry or a worktop where you want to light only the useful area. The wiring stays the same: the batten connects to the mains and the switch acts downstream.

Secure payment, tracked delivery, returns and Designix customer service: you order the confirmed length and temperature, and the rest of the installation is prepared calmly.

Our advice for choosing
The 90 cm LED batten is a linear luminaire that can be mounted on the ceiling or wall, replaces a fluorescent tube and illuminates a worktop, workbench or hallway. The collection is available in different colour temperatures, protection ratings and switching modes.