30 cm ruler

This selection is also available in our French store: Réglette 30 cm

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
30 cm ruler
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Count on one 30cm LED batten per narrow area to light: inside a cupboard, under a cabinet, above a desk or along a stretch of hallway. This flat fixture with integrated LED mounts on the wall or under a surface, plugs into the mains or recharges, and is chosen first on its colour temperature, its power supply and its ingress protection rating.

Contents

What is a 30cm LED batten and what is this short format for?

It is an elongated housing 30cm long, fairly slim, whose diffusing face conceals the LEDs. It is installed on the wall, under a shelf or under a cabinet, and produces light directed at the area to be lit. The models in all LED battens share this principle, with variations in power supply and finish.

30cm LED batten or ruler: how not to get confused?

The two words look similar in search, not in use. A 30cm LED batten is a light fixture: it has a housing, a power supply, a diffuser and a wall or under-cabinet mount. A ruler is used to measure or draw. Before ordering, check that the listing really describes a lighting product, with colour temperature and ingress protection rating.

What a 30cm format changes under a cabinet or in a hallway

Thirty centimetres cover a narrow surface, not a room. Under a cabinet, the light falls at a grazing angle on the worktop and brings out the relief. In a hallway, a single light point is enough to mark the passage without glare. Over a long length, it is better to line up several modules than to stretch a single short housing. To place this format within the whole range, browse all our light fixtures.

What light does a 30cm LED batten give and how do you choose its temperature?

Colour temperature, expressed in kelvins, decides the mood and how colours render. It cannot be guessed from a photo: it is read on the listing. A warm white relaxes a bedroom, a neutral white keeps a worktop legible, daylight gives a crisp rendering in a utility room.

Warm white, neutral white or daylight: which for which room?

Around 2700 to 3000 K, the light leans yellow and suits a headboard or a bedroom cupboard. Around 4000 K, the white stays neutral and legible: kitchen, desk, hallway. Around 6500 K, the rendering becomes cold and crisp, useful in a garage or a laundry room. In a bedroom, a very cold light breaks the mood in the evening.

Colour temperature: which light for which room
Temperature Rendering Rooms and uses To check on the listing
Warm white (about 2700 to 3000 K) Soft light, yellow tint Bedroom, living room, headboard Value in kelvin
Neutral white (about 4000 K) Legible white, little colour Kitchen, desk, hallway Value in kelvin and flux
Daylight (about 6500 K) Cold white, crisp rendering Garage, workshop, laundry room Consistency between power and flux

Flux, power and rendering: the figures to check on the listing

Power in watts indicates consumption, flux in lumens the amount of light emitted. On a short format, do not try to light a whole room: aim for accent or zone lighting. If a stated flux seems implausible for the power, go by the power and ask for confirmation rather than building a calculation on it. Also look at the diffuser: opal softens the light, clear marks contrasts more.

Where to install a 30cm LED batten in the home?

The short format goes where space is lacking: under a shelf, inside a cupboard, above a sideboard. The real constraint is rarely space, it is the power supply. Locate it before choosing between a wired model and a standalone model.

Cupboard, under kitchen cabinet and headboard

In a cupboard, the batten is fixed under the top shelf and lights the clothes without casting shadows. Under a kitchen cabinet, it highlights the worktop and makes cutting safer. At the headboard, it serves as discreet reading light and avoids a bulky bedside lamp. For a damp room, see instead lighting a bathroom.

Desk, workshop and garage: the short format as a complement

On a desk, place it in front of or beside the worktop so the shadow of your hand does not fall on the keyboard. In a workshop, it lights a zone, not the room: above a workbench, it complements general lighting. Workshop LED battens and garage lighting are worked out the same way, zone by zone.

Rechargeable, 220V or motion sensor 30cm LED batten: which power supply to choose?

The decisive criterion comes down to one question: is there a power supply immediately nearby? If yes, a mains-connected version stays fixed and needs no battery maintenance. If not, a rechargeable version is mounted then moved. The sensor, for its part, responds to how often the light is switched on, not to a cable problem.

Rechargeable or mains: what it changes for installation

A rechargeable batten is fixed without wiring and removed for charging: handy in a cupboard or behind a sideboard, provided you accept recharging it regularly. Check the stated battery life and the charging method. A 220V batten requires a power supply and is wired into the installation: browse the rechargeable models and, for the other option, how to connect to the 220V mains.

Motion sensor: useful in a passage

On a staircase, in an entrance or a garage, automatic switching saves you searching for the switch with your hands full. Look at the range and the delay, that is the time before it switches off. Motion sensor switching comes in a standalone version, and in a mains-powered sensor version when a power supply is already in place.

Waterproof 30cm LED batten or not: which ingress protection rating to aim for?

The IP rating, two digits, indicates the housing's resistance to dust and water. It is read before purchase, not after installation. In a dry room, IP20 is enough; as soon as there is moisture or splashing, go up a level.

IP20, IP44, IP65: read the rating before buying

The first digit concerns solids, the second liquids. IP20 protects against limited vertical drops, with no water jet. IP44 tolerates splashing. IP65 resists dust and water jets, which makes it suitable for damp rooms or a sheltered outdoor area. A waterproof batten is justified above all by the actual use of the room, not by systematic precaution.

Ingress protection rating: what each IP allows
Rating Resistance Rooms concerned Note
IP20 Limited vertical drops, no water jet Cupboard, desk, dry room Unsuitable for a damp room
IP44 Water splashing Bathroom, laundry room Check the installation zone
IP65 Dust and water jets Sheltered outdoor, damp room Check mounting and cable entry

Bathroom and outdoor: the risk zones

Around a washbasin, splashing is frequent: IP44 covers this use, IP20 stays reserved for dry zones. Outside, runoff and dust require a more sealed housing, and careful cable entry. Compare the IP65 range, the waterproof battens, the outdoor models and the waterproof outdoor range depending on whether the installation is covered or not.

Wall-mounted or surface-mounted batten: what effect on the wall and ceiling?

The same batten does not give the same light whether it is screwed to the wall, slipped under a shelf or fixed to the ceiling. The wall underlines a line and lights downwards. Under a surface, the light falls on the worktop. On the ceiling, it replaces a central point in a hallway.

Fixed to the wall: grazing light and the room's lines

Placed horizontally on a wall, a wall-mounted batten draws a clean line and throws light onto the nearby surface. The metal batten housing plays a visual role here: slim and understated, it holds the wall without cluttering it. Avoid placing it exactly at eye level: the source would be visible.

Under a shelf or on the ceiling: avoid glare

Under a shelf, the light grazes the wall and lights what is below, provided the housing does not stick out beyond the support. On a hallway ceiling, point the diffusing face towards the floor and not towards a glazed door. Choosing an opal diffuser rather than a clear one reduces glare on LED battens mounted high up.

How to match and maintain a 30cm LED batten?

The finish is chosen with the wall that receives it, not against it. A metal batten asserts its design in a kitchen or a workshop, a matte white disappears on a light wall, a black marks a line on a painted background. Maintenance, for its part, comes down to one gesture: a dry cloth on the diffuser.

Metal, white or black: choose according to the wall

On a white wall or a light cabinet, a white housing blends in and leaves only the light visible. On a dark splashback or a brick wall, metal or black holds the line. Also look at the thickness of the housing: under a shallow cabinet, a slim model fits where a thick one sticks out. The rest of the range is in the Designix lighting range.

Cleaning and lifespan: the simple gestures

Dust the diffuser dry, without abrasive product or water jet, even on a protected model. Before buying, check on the listing whether the LED or the driver is replaceable: this decides what repair is possible. On lifespan, no value is guaranteed by the format: only the listing of the model concerned is authoritative.

Which mistakes to avoid before buying a 30cm LED batten?

Five points settle most disappointments: check the power supply before choosing the power option, avoid a very cold light in a bedroom, check the ingress protection rating for a damp room, look at the mounting method supplied (screws, clips, adhesive) and do not confuse a light batten with a ruler. On a fragile wall or a cabinet, a clip bracket or a screwed plate holds better than adhesive alone.

On the ordering side, the process is simple: secure payment, tracked delivery, possible returns and Designix customer service for installation questions. Compare two or three models on five lines of the listing (length, temperature, power supply, IP, mounting) before confirming. The rest can be browsed in our lighting catalogue.

Frequently asked questions

30cm LED batten or ruler: how to tell the difference?

Both are measured in centimetres, but a 30cm LED batten is a light fixture: a flat housing with integrated LED, with a power supply and a wall mount. A ruler is used to measure or draw. The word batten is also used for a small folding rule, hence the confusion in search.

Which 30cm LED batten to choose for a cupboard or under-cabinet?

In a cupboard or under a kitchen cabinet, look for a flat, shallow model whose mounting matches the support: screws, clips or adhesive. A rechargeable version avoids running a cable, a 220V version requires a power supply immediately nearby.

Can a 30cm LED batten be installed without an electrician?

A rechargeable batten is fixed then recharged, without connection to the mains. A 220V batten is wired into the installation and requires a power supply, often entrusted to an electrician. The product listing specifies the power supply method and the type of mounting supplied with the fixture.

Do you need a waterproof 30cm LED batten for a bathroom?

In a bathroom, the ingress protection rating matters more than the power: IP44 covers water splashing around the washbasin, IP20 stays reserved for dry zones. Also check that the housing and diffuser are designed for moisture and that the mounting holds on the support.

How many lumens for a 30cm LED batten?

No universal figure: the flux is stated in lumens on each product listing, to be compared with the stated power. On this short format, the use remains accent or zone lighting. If the stated flux seems inconsistent with the power, go by the power and ask for confirmation.

Our advice for choosing
This collection brings together 30 cm strip lights, a flat and compact format for lighting a cupboard, a worktop or a hallway. Here you will find the criteria that truly change the result: colour temperature, power supply, mounting and protection rating, with guidance for each room.