200W LED outdoor floodlight
This selection is also available in our French store: Projecteur extérieur LED 200 w
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
A 200W LED floodlight is mounted high, aimed with its screws and sends a wide beam towards the area to be covered: yard, driveway, car park or facade. Plan for a facade mounting, under a canopy or on a post, with a sensor if the area needs to light up when someone passes, without a sensor if it stays on.
What light does a 200W LED floodlight give?
A 200W LED floodlight produces a wide, directional beam: it lights a whole area rather than a single point, and is adjusted by aiming it. The result depends above all on the chosen colour temperature, the optics and the mounting angle, not only on the stated wattage.
200W LED floodlight: what the wattage really tells you
The 200W describes the electrical consumption of the luminaire, not the amount of light it delivers to the ground. Two units of the same wattage can light very differently depending on the optics, the quality of the components and the care taken with the reflector. So you first choose the surface to cover and the mounting distance, and the wattage only confirms that the unit is in the class of a yard or a car park. To compare calmly, browse the outdoor floodlight range.
Wide beam and directed light, what that changes over a yard
The beam covers a sheet of light, not a point: over a yard, a single unit lights several spaces or a stretch of driveway. The trade-off is a beam edge that falls far away and can hit a neighbouring window. That is corrected by the aiming and the mounting height, never by the wattage. If you are hesitating between several families, our selection of luminaires gives the overview.
Where to install a 200W LED floodlight?
On a facade above a door, under a canopy, at the top of a post or on a ground stand: the 200W is installed where a surface needs covering. It is reserved for areas that really need reach: yard, driveway, car park, loading dock or workshop.
On a facade, under a canopy or above a door
The facade is the most common position: the floodlight overlooks the area and the beam comes down without crossing the walkway. Above a door, it lights the entrance and the threshold. Under a canopy, it is fixed to the underside, with a grazing beam towards the outside. The wall-mounted versions fixed to a facade are designed for this position, while outdoor LED floodlights cover the other configurations.
On a post, on a stand or on a worksite
On a mast or a post, the floodlight gains height and covers a large surface: car park, dock, open area. On the ground, stand-mounted floodlights move from one point to another. For a worksite or a one-off job, plan for mobile lighting for worksites. And for an enclosed workroom, it is better to aim for lighting a workshop or garage floodlights, whose mounting and optics are designed for indoors.
How does a 200W outdoor LED floodlight with sensor work?
The built-in sensor switches the floodlight on as soon as movement passes through its field, then switches it off after an adjustable time. You adjust the sensitivity, the range and the delay to avoid unnecessary triggering. Without a sensor, switching is done by a switch, a timer or a remote control depending on the model.
Motion sensor: range, sensitivity and delay
Three settings decide how comfortable it is to use. The sensitivity sets the level of movement accepted, the range defines the monitored area, the delay decides how long it stays on after the last pass. After mounting, first set the range low, then raise it until it triggers usefully. A outdoor LED floodlight with sensor avoids leaving the light on all night.
Without a sensor: switch, timer or remote control
Without a sensor, the floodlight stays controlled by hand or by a timer, which suits areas that must stay lit for hours: loading dock, commercial yard, terrace in the evening. Motion-detection models and simple LED floodlights are therefore chosen according to how often people pass, not according to wattage.
Cool white 6500 K, neutral or warm white: what light for outdoors?
Cool white around 6500 K gives a very white, readable light, common on security floodlights. A neutral white around 4000 K stays crisp without turning the facade blue, and a warm white around 3000 K warms a terrace or a wall. The choice is made according to use.
The cool white of security floodlights and what it implies
Around 6500 K, the contrast is strong and details stand out from a distance: handy in a car park or on a dock. On a stone facade or a terrace where you dine, this light looks harsh and flattens the materials. It is not bad, it is simply made for surveillance, not for hospitality.
Moving to 4000 K or 3000 K for a terrace or a facade
Around 4000 K, the light stays crisp without a blue cast: it is the usual compromise for a driveway or a yard. Around 3000 K, you get closer to the look of a halogen and the terrace keeps a warm atmosphere. For a softer garden light, also see garden lighting and the white finishes, which blend better on a light wall.
| Colour temperature | Perceived rendering | Typical outdoor use | To avoid |
|---|---|---|---|
| 6500 K (cool white) | Very white light, strong contrast | Car park, dock, worksite, security lighting | Stone facade or terrace where you dine |
| 4000 K (neutral white) | Crisp white without a blue cast | Driveway, yard, garage surroundings | Very large surfaces lit from far away |
| 3000 K (warm white) | Warm light, close to halogen | Terrace, entrance, facade wall | Work area needing contrast |
IP65, IP66: which ingress protection rating for an outdoor floodlight?
The IP rating gives the resistance to dust and water. IP65 protects against water jets, which covers rain and jet cleaning. IP66 withstands more powerful jets, IP67 temporary immersion. For a facade mounting or under a canopy, IP65 is enough in most cases.
Understanding IP65 and IP66 without getting it wrong
Two digits, two pieces of information: the first concerns solids, the second liquids. The 5 in the first position means protection against dust without total sealing; the 5 or 6 in the second position describes resistance to water jets, more or less powerful. An IP66 does not light better than an IP65, it simply withstands stronger splashes, which matters by the sea or near a pressure washer.
Waterproof, water jets and immersion: the limits
The rating covers the luminaire, not the installation. A poorly tightened cable gland, a pinched gasket when refitting or a cable entry left open let water in despite a high rating. Temporary immersion (IP67) is almost never justified for a wall floodlight. To compare bodies genuinely designed for outdoors, look at the waterproof floodlights.
How to mount and aim a 200W outdoor LED floodlight?
Fix the floodlight on a stable support, high enough for the beam to cover the area without passing through people's eyes. The aim is then adjusted with the screws, pointing at the ground or the wall rather than the horizon. Two moderate aims are better than a single flat beam.
Height, angle and beam range
Height decides everything: mounted too low, the floodlight dazzles and only lights the foreground; mounted very high, it covers widely but loses precision. Aim at the ground a few metres from the supporting wall, with a tight angle, and keep the beam edge inside your property. A useful rule of thumb: the longer the surface, the higher the unit must be and the more the beam must be angled down.
Black or white finish, extra-flat format, integration into the facade
On a light wall, a white finish disappears; on a dark wall or cladding, black blends better. The extra-flat format limits the protrusion and is less noticeable above a door. No finish lights better than another: it is a question of integration. Floodlights with a crafted design are worth a look when the unit stays visible, and all the Designix luminaire families let you coordinate the whole.
| Location | Support to provide | Beam setting | Intended use |
|---|---|---|---|
| Facade, above a door | Wall bracket screwed into the support | Downwards, tight angle | Entrance, yard, driveway |
| Under a canopy | Underside fixing | Grazing, towards the outside | Terrace, sheltered walkway |
| Post or mast | Plate or collar suited to the diameter | Horizontal, slight tilt towards the ground | Car park, dock, open area |
| On a mobile stand | Ground stand or telescopic stand | Adjustable as needed | Worksite, workshop, one-off job |
200W: what wiring and what precautions before connecting?
A 200W outdoor LED floodlight connects to 230 V and requires a protected circuit, an earth connection and a closed junction box. The cable cross-section and the breaker rating are calculated according to the length of the circuit: have them validated by an electrician rather than copying a diagram found online.
Protected circuit, earth connection and junction box
The connection is made in an accessible, closed box, out of reach of running water. The earth connection concerns the metal body of the luminaire. The protection at the head of the circuit depends on the length, the number of points and the environment: it is a calculation, not a model to copy. On a commercial site, industrial floodlights follow the same principles, with heavier mounting constraints.
Heat, ventilation and positioning of the box
An LED floodlight dissipates heat through its body, often aluminium. It must therefore stay ventilated, without being recessed or covered with insulation, with a little space around the box. Avoid placing it against a surface that traps air: the service life of the components depends on it. The choice among floodlights must take this clearance constraint into account, especially under a closed canopy.
200W floodlight, powerful LED ceiling light or powerful LED wall light: how not to get it wrong?
The floodlight is justified when the light must reach far, outdoors, over an open surface. A powerful LED ceiling light lights a room from the ceiling, a powerful LED wall light a wall or an entrance. The right choice depends on the distance to cover and the place, not on the stated wattage.
The uses that really call for a 200W floodlight
Three situations: an open surface to cover from a distance, an area that must light up when someone passes, a light point that you want to aim. A yard, a garage driveway, a dock or a car park meet these conditions. For a sheltered entrance over a few metres, a less powerful unit is enough and will be more comfortable to the eye.
Ceiling light, wall light, strip or spotlight: the other solutions and their limit
A ceiling light lights from a ceiling, indoors or under a closed shelter. A wall light lights downwards or upwards, without reaching far. An LED strip highlights a line and does not cover a surface. A recessed spotlight requires a support designed for recessing. None replaces a floodlight outdoors, and the reverse is also true. For a coloured facade atmosphere, RGB LED floodlights exist, but do not count on them to secure an access.
Frequently asked questions
What is the difference between a 200W outdoor LED floodlight and a 200W outdoor LED floodlight with sensor?
The two models look alike: same wattage, same body, same mounting. The version with a sensor adds a motion detector that switches the floodlight on when someone passes and off after an adjustable time. It avoids leaving the light on permanently, which matters when the floodlight secures a driveway or an entrance.
Is a 200W outdoor LED floodlight enough to light a yard or a car park?
It all depends on the surface and the distance between the floodlight and the ground. A 200W reaches far and covers a large area, which suits a yard, a driveway or a car park; for a narrow walkway, a less powerful model is enough. Aim the beam at the ground rather than at the horizon.
Can a 200W outdoor LED floodlight be used as LED ceiling lighting under a canopy?
Yes, provided you are talking about the underside of a canopy or a shelter, not the ceiling of a heated room. The floodlight is fixed there as on a facade, with a beam aimed at the ground and a protected cable route. For a real indoor ceiling, an LED ceiling light remains the right choice.
Which IP rating should be chosen for a 200W outdoor LED floodlight exposed to rain?
For a facade mounting or under a canopy, an IP65 covers rain and jet cleaning. An IP66 is justified if the floodlight receives powerful jets or is by the sea. The rating does not remove the need to take care with the cable gland and the orientation of the gaskets.
How to prevent a 200W outdoor floodlight from dazzling the neighbours?
The most effective way is to reduce the angle and aim at the ground: a grazing beam heading towards the horizon mainly lights up other people's property. A sufficient mounting height, a well-adjusted sensor and a beam aimed at the useful area limit the glare without switching the floodlight off.
Ordering from Designix
Secure payment, tracked delivery, returns and Designix customer service: you order, you receive, and if the installation does not match what you had in mind, the return remains possible. Before confirming, check three concrete points: the fixing location, the IP rating matching the real exposure, and the colour temperature suited to the area.
Unsure which family to pick? Start from designer outdoor floodlights for aesthetics or motion-sensor floodlights for automatic switching, then refine with the criteria read above.





