100 cm LED batten light

This selection is also available in our French store: Réglette LED 100 cm

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
100 cm LED batten light
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Start with the room, then the protection rating, then the colour temperature: a 1m LED batten is decided in that order. This single-piece format lights a continuous line, under wall cabinets, on a garage ceiling or along a shelf, and mounts on the wall as well as the ceiling.

What light does a 1m LED batten give?

A 1m LED batten gives a linear light, even along its whole length, with no visible hot spot. Depending on the colour temperature chosen, it leans towards warm white for a living room or towards neutral to cool white for a worktop or a garage. Its slim profile makes it easy to forget on the wall.

1m LED batten or 1m LED tube: the same thing?

Both words describe the same object: a flat profile that holds the diodes, a diffuser and the fixings. The word tube stays attached to the old fluorescent tube, while batten refers to the ready-to-screw version. The 100 cm length is that of the profile, not of the lit area, which spills slightly over the sides.

What does a 100 cm format change?

One hundred centimetres cover in a single piece the usual width of a kitchen wall cabinet, a bookshelf or a desk, with no visible joint in the middle of the line. Fewer junctions means less shadow and less cable to hide. The profile fits just as well under a shelf as on a wall.

LED batten formats and their use
Length Where it fits What it changes
60 cm Cupboard, base unit, small shelf Short line, little clearance needed
90 cm Compact worktop, hallway Good balance between discretion and continuity
100 cm Kitchen wall cabinet, shelf, desk Continuous line for a standard use
120 cm Long worktop, workshop Fewer joints, more even light
150 cm Garage, utility room, large shelf Long coverage in a single profile

The catalogue is browsed by length: find all the LED battens and compare the profiles on offer.

Where to install a 1m LED batten in the home?

It goes where the light must follow a line: under kitchen wall cabinets, above a worktop, along a shelf, in a hallway, a garage or a workshop. In a damp room or under a canopy, a waterproof version is preferred over a bare model.

1m LED kitchen batten: under wall cabinets

The most common use. Placed under the wall cabinet, it lights the worktop and removes the shadow cast by your own body when you cook. As a rule, allow around 45 to 60 cm between the worktop and the bottom of the cabinet: the batten is fixed just behind the plinth, with the cable tucked towards the wall. On a stainless steel worktop, angle the diffuser slightly backwards to limit reflections.

LED batten for garage and workshop

On the ceiling, above the workbench, the light line avoids the shadow cast by the head and hands. A fixing screwed into a joist holds better than adhesive on painted concrete. For a long work surface, two aligned profiles are better than one offset. See lighting a garage and the workshop LED battens.

In a wet room, the question of waterproofing is settled before installation: the bathroom requires a protected profile, not a bare model. And if you prefer a vertical line near a mirror, wall mounting gives the same continuous effect.

Which 1m LED batten for each room
Room or use Recommended version Protection rating Colour temperature Point to watch
Kitchen, under wall cabinets Slim batten, 220V supply Dry room, no particular requirement Neutral white Hide the cable behind the cabinets
Bathroom Waterproof 100 cm batten IP65 Neutral white Keep away from direct splashes
Garage Waterproof or motion sensor batten IP65 Cool white Solid ceiling fixing
Workshop, workbench Long batten above the surface IP65 if dusty Neutral to cool white Avoid the shadow cast by the head
Outdoors under a canopy Waterproof outdoor batten IP65 Neutral white Check the stated outdoor use
Hallway, cellar, cupboard Motion sensor or rechargeable batten Dry room Warm white Battery life if rechargeable

LED batten, LED tube or 1m LED neon: what are the differences?

LED neon and LED tube are the words left over from the old fluorescent tube; a 1m LED batten now refers to the same object, in a flat ready-to-fix version. The profile holds the diodes and the diffuser, which sets it apart from a round LED ceiling light, lit from the centre, or an LED living room pendant.

1m LED neon and 1m neon batten: where do these names come from?

Searches keep the old vocabulary: people used to look for a neon for the kitchen or the garage, and now find a batten. The shape has changed, the use is the same. An LED neon is wired like a batten, with no starter or ballast to remove, unlike the old fluorescent tube.

Round 100 cm LED ceiling light or batten: two shapes, two effects

A ceiling light illuminates from the centre and suits a living room. A batten lights a line and suits a worktop. A recessed LED spotlight, for its part, fits into an existing cut-out; cuttable LED strip is cut at marked points and re-powered section by section, whereas the batten comes in a fixed length. To compare the families, browse all our light fittings.

220V, low voltage, sensor or rechargeable LED batten: which version to choose?

A 220V 1m LED batten connects directly to the mains, with no transformer. Low voltage requires a power supply unit and suits careful installations. A motion sensor switches on as you pass in a hallway or garage, and the rechargeable version goes where there is no electrical supply.

220V LED batten: the most common connection

No box to house, just a simple connection point wired to the mains: it is the simple choice for an already equipped kitchen or hallway. Models wired directly to the mains fit on a flush box or at the end of a cable. Low voltage, on the other hand, means housing the unit and watching the cable length.

With motion sensor or rechargeable: for a hallway, a cellar, a cupboard

The sensor switches on when someone is present and off after an adjustable time: useful in a passage where your hands are not free. Models with motion sensor are also available as sensor with 220V supply. With no electrical supply, the rechargeable versions are fixed then recharged.

Which protection rating for a 1m LED batten?

For a damp room, a waterproof 100 cm LED batten rated IP65 resists water splashes and dust. A bare model remains reserved for dry rooms. Outdoors, you also check that the batten is stated for outdoor use, and not only protected against splashes.

Waterproof 100 cm LED batten: bathroom, garage, utility room

IP65 protects against water jets and dust, not against immersion. In a bathroom, keep the profile away from the bath and the shower. Compare models protected to IP65 with waterproof models if the room is simply dusty, and see a waterproof batten for a utility room.

Outdoors: check the stated use, not just the IP rating

A high rating is not enough outdoors: you need a profile designed for temperature variations and permanent humidity. Look at the models for outdoor use, and for an exposed canopy, the waterproof outdoor range.

How to install and fix a 1m LED batten?

The batten is fixed to the ceiling for general lighting, to the wall or under a shelf for task lighting. A flat profile is screwed onto a flat surface, then the supply is connected before clipping the diffuser on. The 100 cm length is installed in a single piece, with no visible joint.

Wall or ceiling: which height for which use

Switch off the power at the breaker before any connection. Under a wall cabinet, the batten goes as close as possible to the rear plinth, to light the worktop without glare. On a garage ceiling, allow a height that lets a person and a stepladder pass. For vertical installations, see wall mounting.

Align, connect, maintain the profile

Mark the line in pencil before drilling: a 100 cm profile does not forgive a few millimetres of misalignment on a shelf. Screw onto a flat surface, leave a little play around the diffuser for expansion, then test before closing up. The connection is made to an existing point, never to a loose cable.

Which colour temperature for LED ceiling lighting?

Warm white leans towards yellow and suits relaxing rooms; neutral white remains the most versatile for a kitchen or a desk; cool white gives a crisp light for a garage or a workshop. It is better to use a single temperature per area to avoid an inconsistent mix on the ceiling.

Warm white or neutral white: which atmosphere in which room

As a general guide, warm white sits around 2700 to 3000 K, neutral white around 4000 K, and cool white above 5000 K. A bedroom or a living room supports warm light; a kitchen needs neutral light to judge cooking; a workshop prefers cool light, crisper on details. For a wet room, neutral remains the safest above the mirror.

LED ceiling lighting: avoid mixing temperatures

A warm ceiling light in the centre and a cool batten under the cabinets create two lights that contradict each other. Match the batten to the temperature of the room's main light. A modern LED ceiling light illuminates a whole area; the batten complements that light in a line, it does not replace it. See also the bathroom and workshop LED battens.

How to maintain an LED batten and avoid choosing mistakes?

A soft cloth is enough on the diffuser, with no abrasive product or water jet, even on a waterproof version. Before buying, check the available length, the presence of a socket or connection point, and the protection rating suited to the room.

Clean the diffuser without damaging it

With the power off, the profile is dusted with a dry cloth. A film of kitchen grease comes off with lukewarm slightly soapy water on a well-wrung cloth, never by spraying. Do not remove the diffuser to wash it: the clips wear out and the profile loses its waterproofing.

Three mistakes to avoid before buying

Measuring the length flush with the cabinet without allowing room for the cable, forgetting that there is no socket in the cupboard, fitting a bare model in a damp room: three classic do-overs. Also check the colour temperature before installing everything. Find all the LED battens and the rest of our lighting catalogue.

Order on Designix: secure payment, tracked delivery, returns accepted and customer service to confirm a choice of length or protection rating before drilling.

Frequently asked questions

How to change a recessed LED spotlight in the ceiling?

Switch off the power at the breaker, remove the spotlight by pulling on its bezel or unclipping its springs, disconnect the connector, then reconnect the new module before pushing it back into the hole. If the ceiling cut-out does not match, a bezel adapter is needed.

Cuttable LED strip: how does it work?

A cuttable LED strip is cut at marked points every few centimetres, where the circuit is designed to be cut. Cut only on these lines, then power each section separately. A 1m LED batten avoids this step when the required length matches the profile.

Can an LED ceiling light be replaced by a 1m LED batten?

Yes, if the existing connection point is reused and the batten covers the area to be lit: a batten lights in a line, an LED ceiling light lights from the centre. In a small hallway or a kitchen, the batten works; in a large living room, a powerful LED ceiling light remains more suitable.

Powerful LED wall light or wall batten in a living room?

A powerful LED wall light illuminates a point, a painting, a corner. A wall batten underlines a line: a bookcase, a moulding, behind a sofa. For reading or setting an atmosphere, the wall light; to draw a continuous line of light, the batten.

100 cm LED aquarium neon: is an LED batten suitable?

An aquarium needs lighting designed for the volume, the plants and the species, often with a particular spectrum. A standard 1m LED batten is not designed for this use: it is better to turn to equipment dedicated to fishkeeping rather than repurpose a general lighting fitting.

Our advice for choosing
The 100 cm LED batten lights up exactly where light needs to follow a line: worktop, shelf, hallway, garage. This long format provides continuous light, mounts on the wall or ceiling, and comes in waterproof, motion sensor or rechargeable versions.