150 cm LED batten light
This selection is also available in our French store: Réglette LED 150 cm
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Measure the surface before looking at wattage: a 150cm LED batten lights a worktop, a workbench or a garage walkway in one continuous strip, and it is the length of that useful strip that decides which version to install. Single, double, weatherproof or with a sensor, the 1.5 m format is chosen first by the room, then by the protection rating and the colour temperature.
What is the wattage of a 150cm LED batten?
Over 1.5 m, wattage ranges from a few watts for decorative use to several dozen watts for a garage or workshop. The longer the batten and the more tubes it carries, the more light it gives. Compare wattage with the surface to be covered rather than with the number of watts printed on the box alone.
150cm double LED batten: two tubes for more light
With two tubes over the same length, light spreads more widely and shadows cast on the workbench are noticeably reduced. This is the format for work surfaces where fine details need to be seen. The workshop battens range shows these double versions already equipped.
How many watts to light a garage?
The question is settled in square metres, not watts: a simple garage is fine with one light point placed along the traffic axis, while a garage converted into a workshop deserves two sources or a double batten. The choice of models designed for the garage is made on this basis.
150cm weatherproof or standard LED batten: which to choose?
A weatherproof batten is protected against water splashes and dust: damp garage, cellar, plant room, bathroom. A standard batten is enough in an office, a dry kitchen or a corridor. The IP rating on the product sheet settles the question in one line.
150cm weatherproof LED batten
In a cool-floored cellar or a garage where the car comes in wet, humidity attacks the contacts of a bare light fitting. The sealed version joins the diffuser and the end caps, letting light through without letting water settle in. Weatherproof battens for damp rooms are made for these spaces.
IP65, IP44: what do these ratings mean?
The first digit concerns solids, the second liquids: the higher it is, the stronger the protection against dust and then against water jets. An IP44 withstands splashes, an IP65 resists jets. See the IP65 models and, for a bathroom, the bathroom light fitting suited to each zone.
Which colour temperature to choose for a 150cm LED batten?
4000 K, known as neutral white, is the most versatile: it stays readable on a worktop without looking cold. Warm white suits living rooms, cool white suits garages and workshops where contrast is needed. One temperature per zone avoids visible differences from one fitting to another.
150cm 4000 K LED batten
On a workbench, neutral white keeps colours accurate and tires the eye less than a very cool white at the end of the day. It is the setting that works everywhere, from pantry to office. For a work room, compare with the range of LED battens offered in several temperatures.
Kitchen LED batten: which light above the worktop?
Under wall units, aim for a light that illuminates the plate and the worktop without reflecting glare into your eyes: neutral white does this job, while a white that is too cool hardens stainless steel and tiles. Keep the same temperature as the rest of the room, otherwise the difference shows. The rest is set out in our lighting catalogue.
How do you replace a fluorescent tube with an LED tube with an electronic ballast?
First identify the ballast in the fitting: if it is electronic, a compatible LED tube can often be fitted without modification; otherwise the ballast must be removed and the wiring reconnected directly. Switch off the power at the breaker before any work and have the installation checked by an electrician if in doubt.
Electronic or magnetic ballast: how to tell them apart?
An electronic ballast is light, flat and hums little; a magnetic ballast is a heavy block that hums and heats up. This difference decides the compatibility of the LED tube and therefore the time spent up the ladder. If in doubt, a new 220 V batten avoids DIY work.
150cm tube batten: keep the fitting or replace everything?
A sound support, properly screwed and correctly wired, deserves nothing more than a tube change. A yellowed housing, a cracked wire or a crackling contact should be replaced: the complete fitting is often simpler than hunting for the compatible part.
150cm single or double LED batten, and do you need a motion sensor?
A single batten carries one tube, a double one holds two: at the same length, the double covers a wider surface and suits garages and workshops. A motion sensor switches the zone on as you pass and off afterwards, handy for a cellar, a corridor or a rarely used garage entrance.
150cm double LED batten
Two tubes also means twice as much material to cool: plan for a well-fixed support and some air around the profile. Over a wide workbench, the double avoids installing two separate fittings.
150cm LED batten with motion sensor
Motion sensor battens are adjusted for range and on-time, to be set according to the length of the corridor. A 220 V powered sensor avoids running an extra control cable.
| Version | What it brings | Where it is used | What to check before buying |
|---|---|---|---|
| Single | One tube, regular linear light | Corridor, kitchen, small garage | Support length and fixing |
| Double | Two tubes, wider lit surface | Workshop, garage, plant room | Total wattage and heat clearance |
| Weatherproof (IP65) | Resists splashes and dust | Bathroom, cellar, covered outdoor | IP rating and diffuser seals |
| With sensor | Switches on as you pass, off by itself | Entrance, corridor, cellar | Range and on-time settings |
| Rechargeable | Works without a socket for a limited time | Cupboard, occasional jobs | Stated battery life and charging method |
| 220 V | Connects directly to the mains | Standard domestic supply | Cable cross-section and circuit protection |
Where to install a 150cm LED batten in the home and in the garage?
The 1.5 m format is fixed to the ceiling or surface-mounted on a wall, above a worktop, a workbench, a row of tools or along a walkway. In a garage, place it along the traffic axis; in a kitchen, under the wall units; outdoors, only under a canopy or with a model designed for outdoor use.
150cm LED batten for the garage
Along the axis, light falls between the wheels and illuminates the floor in front of the door; to the side, it lights the workbench but leaves a dark area under the car. A second light point solves the problem when space allows. Garage lighting solutions are available for both positions.
Outdoor LED batten: what to check before installing it
Under a canopy, driving rain still reaches the fitting: an outdoor label is not enough, you need high protection and intact seals. A model exposed to full wind eventually lets water in. See outdoor lighting and the weatherproof outdoor versions.
| Room or use | Recommended version | Protection rating | Colour temperature | Point to watch |
|---|---|---|---|---|
| Garage | Single or double, along the traffic axis | IP20 in dry areas, IP65 if damp | Neutral white to cool white | Mounting height and risk of impact |
| Workshop | Double, above the workbench | IP20 to IP44 | Neutral white | Solid fixing and protected cable |
| Kitchen | Under wall units, above the worktop | IP20 in dry areas | Neutral white | Glare and reflections on stainless steel |
| Bathroom | Weatherproof, outside the direct shower zone | IP suited to the zone | Neutral or warm white | Compliance with safety zones |
| Cellar, corridor, entrance | With motion sensor | According to room humidity | Cool white | Sensor range and delay |
| Covered outdoor | Weatherproof outdoor version | IP65 | Cool white | No direct splashing |
How do you fix and maintain a 150cm LED batten?
The batten is screwed to the support with its brackets or clips, then connected to the 220 V mains, often via a terminal block or a supplied connector. Plan for several fixing points evenly spaced along the length. Dust the diffuser with a dry cloth: accumulated dust reduces light without anyone noticing.
150cm 220 V LED batten: how to connect it?
Switch off the circuit at the breaker, identify live and neutral, tighten the conductors in the terminal block and close the cover before switching the power back on. A poorly supported 1.5 m batten hangs and pulls on the wires. Models connected to the mains are installed on this principle.
Wall batten: when to mount it vertically rather than on the ceiling?
Above a worktop or a sideboard, wall mounting places the light in front of your hands instead of letting it fall from the ceiling, which avoids your body casting a shadow on the work. It is also used above a row of tools. See how to surface-mount on a wall.
Batten, LED neon or cuttable LED strip: what are the differences?
A batten is a rigid ready-to-install light fitting, supplied in fixed lengths such as 1.5 m. LED neon and the 150cm LED tube often refer to the same linear format, to be installed in a support. A cuttable LED strip, on the other hand, is cut and stuck: more flexible for adapting to corners and niches.
Cuttable LED strip: how does it work?
It is cut at marks printed along its length, then connected to a connector or a power cable. A cut outside the marks leaves the following section without power. For a cupboard without a socket, look instead at the rechargeable models.
Batten or 150cm LED tube: what should you buy depending on your existing fitting?
If the support is in place and in good condition, a 150cm LED tube is enough. Without a support, or with a worn housing, the complete batten avoids doubtful compatibility. The LED battens ready to install cover this second case.
How do you harmonise battens, ceiling lights and wall lights in the same room?
A batten serves as task or circulation lighting; the LED ceiling light provides general light, the LED wall light highlights a wall or a staircase. Keep the same colour temperature from one fitting to another, otherwise the differences show, and spread the sources to avoid dark areas.
Kitchen LED ceiling light and batten: how to combine them?
The ceiling light illuminates the room, the batten illuminates the task: one stays on the ceiling, the other is set under the wall unit. Two levels, one switch or two, depending on the comfort you want. The rest of the equipment is found in all Designix light fittings.
LED ceiling lighting: what place for the batten?
When the central ceiling light leaves dark corners, a linear batten fills the gap without multiplying light points. Fix the batten in line with the ceiling light, shift it towards the dark area and mount it at the same height as the other wall fittings to avoid dark areas. Before ordering, check the available wall length and the mounting height.
One last point before you confirm: measure the useful length, note the required IP rating and set the colour temperature. Order on Designix with secure payment, tracked delivery, returns available and customer service for compatibility questions.
Frequently asked questions
150cm or 120cm LED batten: which length to choose?
Measure the surface to be covered: a 1.5 m batten covers a long worktop, a garage walkway or a workbench in one strip, while a 120 cm one fits better in a small kitchen or between two units. Choose the length that lights the useful area without overhanging the support.
150cm 4000 K LED batten: what kind of light does it give?
4000 K corresponds to a neutral white: neither yellow like a warm white, nor bluish like a cool white. On a worktop or a workbench, it keeps colours readable and stays comfortable over time. It is the most versatile temperature for a linear batten.
Can a 150cm LED batten with motion sensor be installed in a garage?
Yes, it is even the most common use: the light comes on at the entrance and switches off after an adjustable time, with no switch to look for with your hands full. Check that the sensor covers the passage area properly and that the batten suits the humidity of the garage.
150cm weatherproof LED batten: in which rooms should it be installed?
Anywhere the air is damp or dusty: bathroom outside the direct shower zone, cellar, plant room, garage, workshop, covered outdoor area. In a dry room such as an office or a kitchen, a standard batten is enough and is simpler to install.
150cm double LED batten: what is the advantage over a single version?
The double version holds two tubes instead of one: at the same length, it lights a wider surface and suits a workshop or a garage where you work better. It does, however, require a properly fixed support and a little more clearance to dissipate heat.





