12V pool lights

This selection is also available in our French store: Luminaires 12V pour piscine

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
12V pool lights
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

The choice comes down to three points: the pool wall, the immersion depth and the out-of-water connection. A submersible spot recesses into a niche or a dedicated support, a projector mounts on the surface, a floating model lights without any work. The 12V low voltage requires a transformer and instructions that mention submerged use.

Which 12V pool light should you choose for your pool?

A concrete pool takes a spot recessed into a niche, a liner pool needs a model designed for a flexible wall, and an above-ground pool is fine with a surface projector. In every case, read the instructions before buying: they state the immersion depth, the mounting method and the type of seal required.

Submersible 12V pool light: which pool is it for?

The submersible lives in the water, not at the edge. It requires a recess in the wall, a masonry niche or a support supplied with the model, and a flush glass that does not trap dirt. On a buried concrete pool, it is the most discreet solution: the light disappears into the wall and only lights the water. On a liner, the cut-out and the seal change, and not every spot accepts it. Compare with our selection of recessed spots to see what exists in wall mounting.

12V pool light for above-ground pools: mounting and connection

On an above-ground wall, drilling is often avoided: a surface projector sits on the rim or on a support, and a floating model lights without any work. Check the cable length before ordering, since it determines where the transformer goes, and that stays out of the water. An existing pool without a niche follows the same logic, with an outdoor pool light placed rather than recessed.

Choosing a 12V pool light according to the pool
Pool type Solution to consider Points to check
Buried concrete pool Submersible spot recessed into a niche Immersion depth, seal, stainless steel mounting, cable passage
Pool with liner Projector or spot designed for flexible walls Liner compatibility, cut-out, watertightness, instructions
Above-ground pool Surface projector or floating model Drill-free mounting if possible, cable length, transformer
Existing pool without a niche Surface-mounted projector or floating light Size, stability, out-of-water connection
Pool house and terrace Wall light, pendant or rechargeable lamp IP rating, height, atmosphere, control

How does a 12V LED pool light work?

The light receives 12V, never the 220V mains: a transformer or driver steps the voltage down before the cable that runs down to the pool. The LED lights the water without strongly heating the glass, provided the model is designed for immersion. All the connection is made out of the water, in an accessible box.

12V LED pool lights: what does low voltage change?

Low voltage reduces the risk in damp environments and allows a thin cable to be run to the pool. On the other hand, voltage drop over a long distance can weaken the lighting: the further the transformer, the more carefully the cable must be sized. This is a point to check before fixing the position of the box, especially on a large pool.

Do you need a transformer for a 12V pool light?

Yes, systematically, except for a self-contained battery model. The transformer or driver must match the voltage and load of the light, and stay in a dry room or a box designed for outdoor use. An undersized or oversized transformer damages both the light and the power supply. Note its reference before buying, it is used for troubleshooting.

How to install a 12V pool light without mistakes

Switch off the power at the panel before drilling, then follow the instructions: they alone give the permitted immersion depth and the authorised mounting method. The cable runs in a conduit or a cable gland out of the water, never under tension in the wall. If in doubt about the connection, have it checked by an electrician.

Waterproof 12V pool lights: which IP rating to look for?

The word waterproof says nothing precise, the IP rating does. For a submerged light, look for the immersion mention and the depth stated in the instructions. For a terrace, a pool house or a technical room, a rating designed for splashes is often enough. Our pages on the IP65 rating and the IP44 models explain the difference between water jets and simple splashes.

How to run the cable and fix the spot in the wall?

Locate the height of the future light, below the water line, then check the accessibility of the conduit from the technical room. The cable gland seals the entry to the box, the conduit protects the cable in the ground. For mounting, a masonry niche, a screwed support or a seal glued onto a liner do not call for the same gestures: do not mix the three.

Solar 12V pool light: is it a solution for your pool?

A solar pool light is almost always a self-contained floating projector, recharged by a panel and with no mains connection. It lights the surface and the terrace, not the inside of the pool permanently. For permanent submerged lighting, connected low voltage remains the only way.

Solar 12V pool lights: what real use?

The use comes down to supplementing: evening atmosphere, extra lighting on a terrace, an above-ground pool you do not want to drill. A solar model is taken out of the water, recharged, stored. It therefore does not replace a fixed light point in a wall, and its performance depends on the actual sunlight in your garden. See also the rechargeable lights for the pool house.

Floating projector or submersible spot: what is the difference?

The floating one is placed, moved, requires no work and does not light the wall. The submersible one is fixed, lights the water from the inside and changes the colour of the pool in the evening. One is chosen for supplementing and simplicity, the other for the rendering and the duration. A pool can very well combine both, provided 12V is kept for the submerged part.

How to maintain and winterise a 12V pool light?

Switch off the power before any handling, then follow the model's instructions. Clean the glass with a suitable product, without abrasive or scratching tools. When winterising, apply the manufacturer's instructions: some lights stay submerged, others are taken out. Check the seal and the cable gland when refitting.

Cleaning the submersible spot: gestures to avoid

No scraper, no abrasive sponge, no unsuitable detergent: a micro-scratched glass diffuses a milky light and lets less flux through. A soft cloth and the recommended product are enough. If a seal has been opened, replace it rather than reusing it: it is the part that guarantees watertightness, not the glass.

Winterising: should the light be removed?

It depends on the model, and only the instructions decide. A light designed to stay in place spends the winter in the water, powered off; a removable model is taken out and stored dry. In both cases, check the water level under which it works and the condition of the cable before restarting. An emptied pool changes things, since the light is no longer submerged.

Which technical criteria to check before buying a 12V pool light?

Check the voltage, the IP rating, the immersion depth, the material and the mounting method. The instructions must state the submerged use and the out-of-water connection. Also check compatibility with the transformer, the accessibility of the cable and the presence of the seals. These points avoid an installation unsuitable for the pool.

Voltage and transformer: the point to check

A 12V light does not connect directly to the mains. Note the exact voltage required, the load of the existing transformer and the distance to the pool: these three data determine whether the whole will work correctly. If you replace an old spot, keep the reference of the original power supply for comparison.

IP rating and immersion depth: the sheet to read

The IP rating describes the protection against water and dust, the immersion depth describes the use. Both are on the technical sheet or in the instructions. A watertight light not designed for immersion has no place in the pool. For the pool surround, a blue light or a white outdoor light blends more easily with the water and light-coloured tiles.

Technical criteria of a 12V pool light
Criterion What to check Why it matters
Voltage 12V mention and compatibility with the transformer Avoids a connection unsuitable for the pool
IP rating IP stated for immersion or splashing Makes use in damp environments safe
Immersion depth Value stated in the instructions The light must stay within its field of use
Material Stainless steel, ABS or treated polycarbonate Resistance to water and pool chemicals
Mounting Niche, support, screws and seals supplied Ensures the light holds in the wall
Wiring Cable gland, conduit, out-of-water box Protects the connection and makes maintenance easier

Which lights to choose around the pool and in the pool house?

Around the pool, a pool house or a covered terrace calls for complementary lighting: wall light, pendant or rechargeable lamp. For indoor rooms, the living room, kitchen and WC collections help harmonise materials. Check the IP rating in damp areas and keep 12V for the pool.

Large chandelier for high ceilings and living room chandelier: how to light a pool house?

A pool house with a high frame takes a large chandelier for high ceilings, which brings the light down to table height. A lower room is fine with pendant lights above the bar or a living room chandelier for the rest area. To vary the light colour for the living room, prefer a warm white around 2700 K to 3000 K, softer in the evening.

Lights for WC and kitchen: what differences?

In a small space, a compact and easy-to-clean WC light is enough. The kitchen decoration requires something else: light on the worktop, not only on the ceiling. A modern kitchen decor often combines a pendant above the island and low points under the units.

Where to find a 12V pool light and how to get advice?

The collection can be browsed online, with secure payment, tracked delivery and returns. The Designix customer service helps check the voltage, the IP rating and the mounting before ordering. If you are looking for a lighting store in Lyon, note these criteria to compare on site, then cross-check with the model's sheet.

A look in store remains useful to judge the quality of a glass or a seal, and the lighting clearance Lyon sometimes lets you see a model up close. Online, browse all our lights and spot the original lights that could dress the pool house, or an outdoor floor light to mark out the deck.

Before ordering, prepare three pieces of information: the voltage of your transformer, the IP rating required by the location and the type of mounting possible on your wall. The customer service can then confirm compatibility rather than guess.

  • Secure payment
  • Tracked delivery
  • Returns
  • Designix customer service

Frequently asked questions about 12V pool lights

12V pool light: what does this voltage mean?

A 12V pool light runs on low voltage: it is powered by a transformer or driver that steps down the mains current. Check the compatibility of the light, the transformer load and the out-of-water connection. The model must also be designed for immersion, with an IP rating suited to that use.

12V LED pool lights: how to choose?

First look at the mounting, the IP rating and the immersion depth, then the desired light. The LED lights the pool without strongly heating the surface. Choose a model whose instructions state the submerged use and the low-voltage connection, and keep your transformer reference at hand.

Submersible 12V pool lights: can it be installed in an existing pool?

Yes if the wall and the water level allow it: a submersible spot often requires a niche or a support, a projector can be mounted on the surface. In an existing pool, check the accessibility of the cable, the watertightness of the passage and the instructions. A floating model avoids work but does not replace fixed submerged lighting.

Floating light or solar projector: which for an above-ground pool?

Both are installed without work and without a transformer. The floating one lights the surface from the water, the solar projector is placed on the rim or the terrace. Neither replaces a fixed submerged spot. Check the cable length if the model is connected, and the stability of the support in case of wind.

Waterproof 12V pool light: which IP rating to look for?

Waterproof means sealed, but the IP rating specifies the real level. For a submerged light, look for a rating designed for immersion and the depth stated in the instructions. For a terrace or a pool house, a rating suited to splashes may be enough. Do not rely on the word waterproof alone on the packaging.

Our advice for choosing
This collection brings together 12V pool lights: submersible spotlights, LED floodlights and models for above-ground pools. It helps you choose according to watertightness, mounting and low-voltage connection, so you can light the water without installation mistakes.