12V G4 LED table lamps

This selection is also available in our French store: Lampes à poser LED 12V G4

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

What table size for how many people?
Allow about 60 cm per guest: 120 cm for 4, 160-180 cm for 6, 200+ cm for 8. Dimensions are listed on each product page.
Which tabletop material should I choose?
Wood is warm, ceramic is highly resistant to scratches and heat, glass is bright and airy. Choose according to how you will use it.
Extendable or fixed?
Some tables are extendable (with extension leaves), as stated in the title and on the product page.
How do I care for the tabletop?
Wipe with a soft cloth; avoid standing water on wood and abrasive products.
12V G4 LED table lamps
Designix · Design lighting

The right furniture, in the right place

Check the dimensions with our fit checker and receive pieces made to last. Unsure? Our team will answer your questions.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Count on a low-voltage two-pin LED bulb, a 12V transformer and an accent light: that is the combination behind a 12V G4 LED table lamp. The base dictates the bulb, the voltage dictates the power supply, and the bulb's colour temperature sets the mood, warm white for rest, 4000K for work.

What light does a 12V G4 LED table lamp give?

This collection currently contains no products: no material, dimensions, base, protection rating, light temperature, style or reference can be displayed.

A base, not a screw fitting

Two pins about 4 mm apart click into the socket: no thread, no quarter turn. The bulb can be changed without dismantling the fixture, which matters on a bedside lamp you keep for years. The rest of the choice comes down to the silhouette, to be seen in our full range of light fittings.

Warm white or 4000K: which shade for which mood

Around 2700 to 3000K, the light leans amber and casts a soft halo, ideal beside an armchair. At 4000K, the white becomes neutral, sharper on a page or a keyboard. Between the two, it is the use that decides, not the spec sheet. The models are gathered in our designer LED table lamps.

12V, 220V, G4S, G4 LED: how do you avoid getting the wiring wrong?

The G4 base means a two-pin socket, not a voltage. A 12V lamp needs a transformer, a 220V version connects to the mains. The labels G4S, G4 LED or 4G all refer to the same family: check the voltage printed on the label before connecting.

Label What it means What to check before buying
G4 two-pin base, about 4 mm apart the spacing of the socket holes
12V low voltage, powered by a transformer presence and wattage of the transformer
G4S, G4 LED, 4G near-identical spellings of the same base family the voltage, not just the name
220V mains, without a transformer never feed a 12V bulb with 220V
4000K neutral white, cooler rendering for work rather than ambience
Warm white amber shade, soft rendering rest, bedside, reading corner

G4S and G4 LED: variants of the same socket

These spellings circulate in searches and on packaging. They change neither the diameter of the pins nor the way the bulb is fitted. The point to read remains the voltage. To compare silhouettes once that point is settled, browse all our table lamps.

12V or 220V: the mistake that burns out the bulb

A 12V bulb connected to the mains does not light up: it is destroyed. The transformer, or low-voltage driver, does the conversion. If one is already in place behind a piece of furniture, note its wattage before choosing the replacement bulb.

Where to install a 12V G4 table lamp?

These lamps find their place wherever you want a mobile, discreet point of light: bedside table, end of the sofa, entrance console, corner of a desk, worktop. 12V simplifies the connection when a transformer is already present near the furniture.

Room Role of the light Recommended setting What to check
Bedside table soft accent, without glare warm white, 1 or 2W shade height, accessible switch
Desk sharp lighting on the worktop 4000K, adjustable model transformer and cable length
End of sofa ambient halo warm white, low wattage base material, match with the furniture
Kitchen, worktop crisp light, without cast shadow 4000K protection rating if splashes
Hallway, corridor night light, a marker along the way 1W, warm white space on a narrow console
Shelf, display cabinet object lighting low wattage, narrow beam hidden cable, heat build-up

For a bedroom, look at the models designed for the bedroom; for work, the LED table lamps for the office favour an adjustable head. In the kitchen, the aim is to light a kitchen worktop without your body casting a shadow, and in the living room, the designer table lamps for the living room set the mood beside the sofa.

Which wattage to choose between 1W, 2W and 20W?

In 12V G4 LED, 1W and 2W correspond to accent lighting, for reading or marking a corner without flooding the room. A reference quoted at 20W usually means a halogen bulb, which draws more: check that the transformer can handle the load before replacing it.

1W and 2W: just the right accent

1W is enough for a night light or a shelf. 2W clearly lights a page or a keyboard. The difference shows in use, not on the packaging: go for 2W where you really read, 1W where you only want to avoid the dark. Adjustable lamps make this setting more effective by directing the beam.

20W: what are we really talking about?

This value almost always comes from a halogen bulb. If you replace the halogen with an LED, consumption drops markedly for the same use, but the transformer must stay within its load range. An under-loaded transformer may flicker or hum: keep several bulbs on the same circuit rather than a single very low-wattage one.

How do you connect several lamps to a single power supply?

You start from a power point to a junction box, then distribute each lamp on the terminal block. In 12V, a single transformer can power several lamps if its wattage covers their total. Switch off the power, identify the conductors and keep the connections accessible.

How many lamps on the same transformer?

Add up the bulb wattages and compare with the transformer. Stay below its capacity, with a reasonable margin, and leave the box accessible behind a piece of furniture rather than walled in. If in doubt about the conductor cross-section, an electrician settles it faster than a trial.

Cuttable LED strip: where to cut without damaging the circuit

The strip has regular cutting marks: cut only at these marks, otherwise a section will no longer light up. Each segment is then re-powered. The rest of the catalogue can be browsed in the Designix lighting catalogue.

How do you match a 12V G4 table lamp with the rest of the room?

Start from the material of the furniture and the dominant colour: ceramic and linen for a soft interior, black or gold metal for a more graphic decor, crystal for reflections. The shape of the base matters as much as the shade, because it is what you see when the lamp is off, all day long.

Ceramic, crystal, wood: three characters

Ceramic gives a matte base and a full silhouette, very much at home on a bedside table; see the ceramic bases or go straight to the bedside ceramic. Crystal plays with reflections in the living room and hallway, with the crystal lamps. Wood warms a desk or a living room, from designer wood to wood for the living room.

Black, gold, linen: the finish that holds the room

Matte black structures without shining, for example in black for the living room. A gold base paired with a dark shade creates contrast: that is the role of the gold and black finish. For textiles, a linen shade diffuses softly and absorbs harsh reflections.

LED chandelier, LED ceiling light or table lamp: which light for a living room?

A chandelier or LED ceiling light provides the general light, the table lamp adds the local accent near the sofa or armchair. The two complement each other: ceiling light for moving around, low lamp for reading. A wall light suits when the floor must stay clear.

General light: chandelier or ceiling light

For a 12V G4 table lamp, keep a low source near the sofa: a high light illuminates a book poorly. Modern living room lamps fill this role.

Wall light: when the floor must stay clear

On a narrow wall, the wall light replaces the low lamp without cluttering. It also serves as a marker in a corridor. The choice comes down to the projection and the shade, not the quoted wattage, which is often hard to compare between brands.

How do you care for and replace the G4 bulb in a table lamp?

Unplug the transformer before any handling, let it cool, then remove the bulb by pulling it straight, without forcing the pins. A soft cloth is enough on ceramic, wood or metal; avoid water on electrical parts. Check the base and the voltage before refitting.

Changing a recessed LED ceiling spotlight: the method

Switch off the circuit at the consumer unit, let it cool, unclip the bezel, disconnect the terminal block, then check the voltage and wattage of the new module. If the fixture is sealed, an electrician steps in. The principle is the same as in low voltage: switch off before opening.

Ceramic, wood, metal: care that does not scratch

A microfibre cloth on metal, a soft brush on linen, a dry cloth on crystal. No abrasive product on a matte base. For a work desk, metal desk lamps can be dusted in a minute.

Frequently asked questions

Can a 12V G4 LED table lamp be connected directly to 220V?

No. 12V requires a transformer or driver between the mains and the lamp. Connected to 220V, a 12V bulb does not light up: it is destroyed. Read the voltage on the transformer label and on the bulb before connecting.

What is the difference between a 12V G4 LED table lamp at 1W and 2W?

Both correspond to accent lighting. 1W suits a night light or a shelf corner, 2W lights a page or a keyboard more clearly. The difference shows in use, not on the product sheet.

What does a 12V G4 LED table lamp at 4000K correspond to?

4000K means a neutral white, cooler than warm white. It is reserved for work areas: desk, worktop, workshop. For a bedside or a reading corner, a warm white rests the eye more in the evening.

How do you change a recessed LED ceiling spotlight?

Switch off the circuit at the consumer unit, let it cool, then unclip the spotlight by pulling on the bezel. Disconnect the terminal block, check the voltage and wattage of the new module before refitting. If the fixture is sealed, call an electrician.

LED chandelier or LED ceiling light: which to choose for a living room?

The chandelier structures the room and provides a decorative general light; the modern ceiling light is more discreet and suits low ceilings. In both cases, keep a table lamp near the sofa for reading, because a high light illuminates a book poorly.

Secure payment, tracked delivery, returns and Designix customer service: you order without unpleasant surprises, and the bulb can be replaced in the years that follow. Before confirming, check the voltage of your transformer and the spacing of the pins, then compare the silhouettes in the selection of table lamps and the light finishes in design white.

Our advice for choosing
12V G4 LED table lamps run on a transformer, with a two-pin base. These are accent lamps for a bedside table, the end of a sofa or a desk, to be chosen according to wattage and light colour.