4ft fluorescent tube
This selection is also available in our French store: Néon 1m20
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Count on 1200 mm of tube, a two-pin cap and a white tone chosen for the room: these three points decide whether a 1.2m neon light fits without replacing the fixture. A 120 cm tube gives a continuous line of light, with no shadow on a worktop, in the kitchen as well as in the workshop.
What is a 1.2m neon light and what light does it give?
A 1.2m neon light is a 120 cm long lighting tube, with linear and even light, that is mounted under a cabinet, in a kitchen or in a workshop. The LED version replaces a fluorescent tube of the same length and removes the shadow cast by the body onto the worktop.
1.2m LED neon light: what the tube replaces
The LED tube reuses the existing fixture and lights up immediately, without the warm-up time of a fluorescent. The result remains a sharp line, useful above a fabric sample or a workbench. To compare neighbouring lengths, see our selection of LED neon lights, which also gathers the longer formats.
Decorative neon or lighting tube: how to avoid mistakes
A flexible illuminated sign and a lighting tube have neither the same function nor the same fixture. The first decorates a wall, the second lights a surface. If you are looking for a wall effect, look instead at neon wall lights; if you want to see clearly on a worktop, stay with a tube.
How to replace a fluorescent tube with a 120 cm LED tube?
A 1200 mm fluorescent tube is replaced by an LED tube of the same length by switching off the power, then removing the tube and its diffuser. The decisive point is the power supply: depending on the fixture, you remove the starter and adapt the ballast, or you choose a directly compatible tube.
Removing the old tube without forcing
Switch off the power at the circuit breaker, rotate the tube a quarter turn in its holders, then remove it. Then measure the length, the diameter and the pin spacing: this reading, more than the reference printed on the tube, is what lets you order correctly.
Ballast and starter: what to keep, what to remove
The starter is used to start a fluorescent tube: it becomes useless, and often troublesome, with an LED tube. The ballast depends on the fixture wiring and on the tube instructions. If in doubt about compatibility, it is better to have the whole checked than to force it.
| Point | On the old tube | On the new tube | If not respected |
|---|---|---|---|
| Length | 1200 mm | 1200 mm | The tube does not clip in |
| Format | T8 or T5 | Same format | Different diameter and pins |
| Cap | Two pins | Identical cap | No electrical contact |
| Starter | Present on some fixtures | Often unnecessary with LED | Flickering on start-up |
| Ballast | Fluorescent wiring | Removed or kept depending on the tube | Possible malfunction |
| Power supply | Switched off | Switched off | Risk of electric shock |
What is a T8 tube?
T8 is a tube format whose diameter is close to 26 mm, the most common on 120 cm tube fixtures. It is recognised by its two pins at each end. T5, which is thinner, does not fit the same fixture: the format must be checked before ordering.
T8 and T5: recognising them at a glance
Look at the end caps: two spaced pins on a thick body means T8; a thin, narrow body means T5. This difference in diameter prevents swapping the two families on the same fixture, even at identical length.
Measure the tube, not the fixture
The 1200 mm are measured pin to pin, with the tube out of the fixture. A fixture may be listed as 1.2m without the tube being exactly that. For neighbouring lengths and wall mountings, browse the Designix lighting catalogue.
What is the consumption of a neon light per hour?
Hourly consumption is read from the tube power: divide the stated watts by 1000 to get kWh per hour. A 120 cm tube therefore consumes less the more it is LED rather than fluorescent, and the total depends above all on the number of hours it is switched on each day.
How to calculate the consumption of a 120 cm tube
Read the power in watts on the label, divide by 1000, multiply by the number of hours of use. A tube switched on two hours a day does not weigh the same as a tube left on all day in a workshop. The bill follows duration as much as power.
Power or lighting duration: what weighs most
Doubling the lighting duration counts more than switching from one model to another within the same family. So compare tubes with equivalent luminous efficiency rather than by stated power alone, and look at 120 cm and 150 cm LED neon tubes to place the sizes.
How to know whether to change the neon light or the starter?
A tube that blackens at the ends, flickers then goes out or takes time to start is often the tube itself. A rapid flicker on start-up, with a recent tube, points more to the starter. The simplest is to replace the tube first, then the starter if the fault persists.
The signs that point to the tube
Grey or black ends, light that dims, laborious start-up after a few minutes: the tube is reaching the end of its life. It is the first part to change, because it wears out and can be removed without tools.
The signs that point to the starter
A sharp, regular flicker, with a new tube in place, points to the starter. It comes out of its housing without any special tool. If the fault survives replacement of both, the fixture power supply should be checked.
Which 1.2m neon light to choose for the kitchen, bathroom or bedroom?
In the kitchen, the tube is placed above the worktop for light without shadow. In a bathroom, the protection rating counts more than the tone, because of humidity. In a bedroom, an indirect light and a warm tone are preferred, gentler on waking.
| Room or use | What is lit | White tone | Protection rating | Point to watch |
|---|---|---|---|---|
| Kitchen | Worktop, splashback | Neutral to cool | Standard in dry areas | Avoid body shadow on the worktop |
| Bathroom | Mirror, vanity unit | Neutral | High near water points | Humidity requires a suitable rating |
| Bedroom | Indirect lighting, headboard | Warm | Standard | No bare tube in line with the bed |
| Office, workshop | Worktop, workbench | Neutral to cool | Standard | Extend the tube to avoid shadows |
| Dressing room, cupboard | Wardrobe, shelves | Neutral | Standard | Place in front of clothes, not above |
| Cellar, garage | Circulation | Cool | Standard to reinforced | Check the humidity of the room |
Kitchen neon light: lighting the worktop
A 120 cm tube covers a good part of a standard worktop. Place it in front of the upper cabinet, on the user side, so that your shadow does not fall on the chopping area. The kitchen neon collection details under-cabinet mountings.
Bathroom and bedroom neon light: protection rating before tone
Near a sink, the protection rating comes before aesthetics. For a bathroom mirror, a neon wall light for bathrooms often avoids a ceiling mounting. In a bedroom, look for indirect light: a neon wall light sends light towards the wall and softens the atmosphere.
How to install and maintain a 1.2m neon light?
A 120 cm tube is fixed with clips or brackets screwed into the fixture, never into empty space: the weight is spread over the whole length. Switch off the power before any handling, remove the tube by rotating it a quarter turn, and clean it dry.
Fixing a 120 cm tube without bending it
Identify two solid support points, screw the clips into the cabinet material, then clip the tube in by engaging both ends at the same time. A tube resting on one side only works loose and eventually comes out of its housing.
Cleaning a tube without damaging the contacts
Dust dry, with a soft cloth, without product on the pins. A tube that crackles after cleaning has received moisture in its contacts: let it dry before switching it back on. For a vertical mounting, compare with a neon wall light.
How to match several 1.2m neon lights in the same room?
Several 120 cm tubes are aligned on the same line to give continuous lighting, with regular spacing between each. Keep the same white tone from one tube to another, otherwise the difference shows on the walls, and complete with a wall light when the room lacks vertical light.
Aligning the tubes on a single line
Draw an axis in pencil before screwing, space evenly, and order the tubes in the same tone. Two different whites on the same wall produce a visible break, even a few kelvins apart. For long lengths, see 120 cm LED neon lights.
Ceiling tube and wall light: the right duo
The tube handles horizontal light, the wall light brings the vertical. This duo works well in a dressing room or a wide hallway. Look at decorative neon wall lights and under-cabinet kitchen neon lights to compose without multiplying ceiling sources.
Which colour temperature to choose for a 120 cm tube?
Choose the tone according to what you are lighting, not by taste alone: a white that is too cool above a bed is tiring, a white that is too warm on a worktop makes colours look wrong. The references below are usual orders of magnitude in the trade.
| Tone | Order of magnitude | Where to use it | Rendering |
|---|---|---|---|
| Warm white | Around 3000 K | Bedroom, living room, indirect lighting | Golden light, cosy atmosphere |
| Neutral white | Around 4000 K | Kitchen, bathroom, office | White close to daylight |
| Cool white | Above 5000 K | Workshop, garage, cellar | Very white, contrasted light |
A blue or coloured neon light is a matter of decoration rather than useful lighting: it does not replace a white tube in a work room. To find all the families, go through all our lighting fixtures.
Frequently asked questions about the 1.2m neon light
Is it possible to replace a neon tube with an LED tube?
Yes, provided you keep the same length, the same tube format and the same cap as the old one. The LED tube fits the existing fixture once the power supply is adapted: on a fixture with a starter, the starter is generally removed. The result is immediate lighting, without flicker.
How to fit an LED neon light on an old fixture?
Switch off the power, remove the old tube, then check three things: the length, the diameter and the shape of the cap. If these three points match, the new tube clips in. The power supply still has to be handled depending on the fixture, starter or ballast, then the lighting tested before closing the diffuser.
Is a starter necessary for an LED tube?
Generally no, and it is better to remove it: a starter designed for a fluorescent tube disrupts the start-up of an LED tube and can cause flickering. Some fixtures have none at all. The instruction is on the instructions of the tube purchased, and that is what counts.
How to wire an LED neon light without a starter?
Switch off the power at the circuit breaker, access the fixture and remove the starter from its housing, then put the tube back in place. On a mounting with a ballast, the tube must be compatible with this mounting, otherwise the ballast is removed. A lighting test validates the installation.
How much does a 1.2m neon light cost?
The budget depends on the format, the white tone, the diffusion quality and the level of luminous efficiency. An entry-level tube and a high-efficiency model are not in the same range. The collection currently has no products: the budget is consulted directly in the price grid.
Ordering a 1.2m neon light from Designix
Before validating, note the three measurements of the existing fixture: length pin to pin, tube diameter, pin spacing. This reading avoids the most frequent back-and-forth. For a complete project, complete the tube with all the lighting fixtures and with neon wall lights.
Secure payment, tracked delivery, returns and Designix customer service: the four points are assured on every order, and the team answers before purchase if any doubt remains about the compatibility of the tube.





