{"title":"Wireless LED bulbs","description":"\u003cp\u003eA wireless light bulb runs on a rechargeable battery and works in any socket, with no plug or wiring. First check the base of your light fitting (E27, E14, G9, GU10), then choose the colour temperature and check the protection rating if the bulb is going outdoors.\u003c\/p\u003e\n\n\u003cp\u003eThe principle is simple: the battery sits in the base, the bulb switches on by button or remote control, then unscrews for recharging. You can move the same light from the living room to the terrace, or light a cupboard that never had a socket. To build the whole set, browse \u003ca href=\"https:\/\/designix.fr\/collections\/luminaire\"\u003eour lighting catalogue\u003c\/a\u003e and keep in mind that the socket remains the starting point for any choice.\u003c\/p\u003e\n\n\u003ch2 id=\"fonctionnement\"\u003eHow does a wireless LED light bulb work, with no plug or wiring?\u003c\/h2\u003e\n\n\u003cp\u003eA wireless light bulb carries a rechargeable battery in its base: it works away from any socket and switches on by button, remote control or sensor. It then recharges from the mains or by USB, and goes back into its socket, with no electrician and no work.\u003c\/p\u003e\n\n\u003ch3\u003eRechargeable wireless LED light bulb: battery, runtime and charging\u003c\/h3\u003e\n\n\u003cp\u003eThe battery replaces the mains connection. Depending on the model, charging is done by USB, on a small base or by plugging the bulb back into a dedicated holder. The routine is always the same: unscrew, recharge, screw back in.\u003c\/p\u003e\n\n\u003cp\u003eRuntime varies from one model to another and depends on the brightness chosen. A bulb used as a night light lasts longer than one used as main lighting. That figure appears on the product sheet, not in a general table: it is the one to read before comparing two references. For daily use, plan a second bulb as backup or a regular recharge, in the evening for example.\u003c\/p\u003e\n\n\u003ch3\u003eWireless LED light indoors: what can it really light?\u003c\/h3\u003e\n\n\u003cp\u003eIndoors, a wireless bulb gives accent light: reading in an armchair, lighting a sideboard, crossing a hallway to the switch, opening a deep cupboard. It does not replace the main lighting of a room, which needs a continuous supply. For that kind of use, compare with \u003ca href=\"\/collections\/ampoules-led-220v\"\u003emains 220 V bulbs\u003c\/a\u003e, more powerful and made to stay in place. A battery bulb is chosen precisely where the cable is missing.\u003c\/p\u003e\n\n\u003ch2 id=\"piece\"\u003eWhich wireless LED light should you choose for each room?\u003c\/h2\u003e\n\n\u003cp\u003eIn a cupboard or a niche, a flat wireless LED spotlight is enough; near a bed or an armchair, a rechargeable bulb screwed into its socket gives accent light; on a terrace, go for a model protected against water spray. The room decides the format before the style.\u003c\/p\u003e\n\n\u003ch3\u003eWireless LED spotlight for a cupboard, a niche or a worktop\u003c\/h3\u003e\n\n\u003cp\u003eA flat spotlight slips under a shelf, at the back of a cupboard or above a worktop, and switches on with no visible wire. The decisive criterion is not looks but the thickness of the housing: a model that is too thick blocks the cabinet door or sticks out from the strip. Also check the fixing provided, magnet, adhesive or screw, and the weight it accepts.\u003c\/p\u003e\n\n\u003ch3\u003eWireless LED lighting with remote control: what is it for?\u003c\/h3\u003e\n\n\u003cp\u003eThe remote control serves hard-to-reach areas: the top of a wardrobe, a hallway corner, a high wall light, a spotlight fixed under a low unit. It saves you from contorting to reach a hidden button. Not every model includes one: the product sheet must mention it. For fixed, everyday use with dimming, look instead at \u003ca href=\"\/collections\/ampoules-led-a-variateur\"\u003edimmable LED bulbs\u003c\/a\u003e, designed for a standard circuit.\u003c\/p\u003e\n\n\u003ch2 id=\"culot\"\u003eWireless LED light bulb: which base to choose between E27, E14, G9 and GU10?\u003c\/h2\u003e\n\n\u003cp\u003eThe base is imposed by the socket of the fitting: E27 on most living room lamps and pendants, E14 on small fittings and wall lights, GU10 and G9 on spotlights and ceiling lights. Note the existing base before buying, without trusting the apparent size of the bulb.\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003ccaption\u003eWhich base for which fitting\u003c\/caption\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003cth\u003eFittings concerned\u003c\/th\u003e\n\u003cth\u003ePoint to watch\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eE27\u003c\/td\u003e\n\u003ctd\u003ePendants, living room lamps, ceiling lights, chandeliers\u003c\/td\u003e\n\u003ctd\u003eLarge screw thread; check the bulb fits inside the shade\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eE14\u003c\/td\u003e\n\u003ctd\u003eWall lights, small lamps, chandelier candles\u003c\/td\u003e\n\u003ctd\u003eSmall screw thread; short format often needed\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003ctd\u003eSpotlights and adjustable ceiling lights\u003c\/td\u003e\n\u003ctd\u003eTwo short pins; twist to clip in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eG9\u003c\/td\u003e\n\u003ctd\u003eSmall fittings, compact wall lights\u003c\/td\u003e\n\u003ctd\u003eTwo thin pins; do not force into the socket\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGU5.3\u003c\/td\u003e\n\u003ctd\u003eRecessed low-voltage spotlights\u003c\/td\u003e\n\u003ctd\u003eLonger pins; check the installation voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eE27 base: the format of pendants and living room lamps\u003c\/h3\u003e\n\n\u003cp\u003eThe large screw thread fits most table lamps, pendants and ceiling lights. It is the base that leaves the most room for a battery, so the one most often found in wireless versions. Before ordering, take a look at the \u003ca href=\"\/collections\/ampoules-led-e27\"\u003eE27 LED bulbs\u003c\/a\u003e to compare shapes, globe, standard or long, and measure the height available under the shade. A bulb that is too long touches the diffuser and blocks the light downwards.\u003c\/p\u003e\n\n\u003ch3\u003eE14, G9 and GU10: the small bases of spotlights and ceiling lights\u003c\/h3\u003e\n\n\u003cp\u003eOn a wall light or a small lamp, it is often an E14, with a finer thread and a short format. \u003ca href=\"\/collections\/ampoules-e14\"\u003eSmall E14 base bulbs\u003c\/a\u003e also serve as chandelier candles. The G9, with two thin pins, fits compact fittings and wall lights: see the \u003ca href=\"\/collections\/ampoules-led-g9\"\u003eG9 bulbs for small fittings\u003c\/a\u003e. The GU10 and GU5.3, with pins, are for adjustable spotlights; the \u003ca href=\"\/collections\/ampoules-led-gu5\"\u003eGU5.3 range\u003c\/a\u003e requires checking the installation voltage, often 12 V. In every case, unscrew the old bulb and read the marking on the socket.\u003c\/p\u003e\n\n\u003ch2 id=\"temperature\"\u003eWhat light does a wireless LED light bulb give: warm white, neutral white or amber?\u003c\/h2\u003e\n\n\u003cp\u003eA 2700 K bulb gives a warm white, close to halogen, suited to the living room and the bedroom; 3000 K stays warm but a little crisper, handy above a worktop. Amber glass or filament warms the look further, without changing the stated temperature.\u003c\/p\u003e\n\n\u003ch3\u003e2700 K or 3000 K: what difference in a living room?\u003c\/h3\u003e\n\n\u003cp\u003eAround 2700 K, the light leans towards soft yellow: the look of a dinner, a read in an armchair, a headboard. Around 3000 K, the white stays warm but gains crispness, which helps tell colours apart on a worktop or a desk. Between the two, the gap is visible side by side, discreet when only one bulb is on. Compare the \u003ca href=\"\/collections\/ampoules-2700k\"\u003e2700 K bulbs\u003c\/a\u003e and the \u003ca href=\"\/collections\/ampoules-3000k\"\u003e3000 K bulbs\u003c\/a\u003e before deciding, and keep the same temperature in a room to avoid two different halos.\u003c\/p\u003e\n\n\u003ch3\u003eFrosted glass, filament or amber tint: what effect on the wall?\u003c\/h3\u003e\n\n\u003cp\u003eFrosted glass diffuses the light without showing the source: handy above a table where people sit. A filament bulb shows the diodes, which warms the mood when the bulb stays visible, in a low pendant for example. The amber tint colours the light and softens the effect on a pale wall. See the \u003ca href=\"\/collections\/ampoules-a-filament\"\u003efilament bulbs\u003c\/a\u003e, the \u003ca href=\"\/collections\/ampoules-en-verre\"\u003eglass bulbs\u003c\/a\u003e and the \u003ca href=\"\/collections\/ampoules-coloris-ambre\"\u003eamber bulbs\u003c\/a\u003e to get an idea of the look. On the technical side, note the kelvin value and check compatibility with a dimmer if your fitting has one.\u003c\/p\u003e\n\n\u003ch2 id=\"spot\"\u003eRechargeable wireless LED spotlight: where to place it and how to fix it?\u003c\/h2\u003e\n\n\u003cp\u003eA rechargeable wireless LED spotlight is fixed by magnet, adhesive or screw depending on the model, on a unit, under a shelf or in a hallway with no socket. You detach it to recharge it, then put it back: that is what sets it apart from a recessed ceiling spotlight.\u003c\/p\u003e\n\n\u003cp\u003eThe mount matters as much as the spotlight. An adhesive holds on a clean lacquered unit, less well on a textured wall or greasy tiles: degrease before sticking and leave it to set for a day. A screw means drilling, so agreement if the unit is not yours. The magnet suits metal surfaces and lets you detach the spotlight one-handed. Finally, the weight of the housing affects how well it holds over time: a light model holds better under a thin shelf.\u003c\/p\u003e\n\n\u003ch3\u003eWireless LED spotlight with remote control: settings and range\u003c\/h3\u003e\n\n\u003cp\u003eThe remote control lets you switch on, switch off and sometimes adjust brightness without touching the spotlight. It proves useful when the housing is fixed high up or deep in a corner. The range depends on the model and on what separates the control from the spotlight: it is stated on the sheet, to be checked before choosing rather than assumed. To light an entrance or a staircase with no socket, it is the simplest setup.\u003c\/p\u003e\n\n\u003ch3\u003eHow do you switch the light on remotely without wires?\u003c\/h3\u003e\n\n\u003cp\u003eWith no wiring, switching on goes through a remote control, a motion sensor or a remote switch supplied with the device. The bulb or spotlight must be compatible: check on the sheet that the control is included, because a model without a remote will not be controlled. No Wi-Fi network is needed for this type of control, which sets it apart from connected control. If you are looking for wireless lighting for outdoors, the \u003ca href=\"\/collections\/ampoules-d-exterieur-led\"\u003eoutdoor bulb selection\u003c\/a\u003e gathers the protected models.\u003c\/p\u003e\n\n\u003ch2 id=\"comparaison\"\u003eWireless bulb, connected bulb or LED strip: which to choose?\u003c\/h2\u003e\n\n\u003cp\u003eA wireless bulb moves and lights without a socket; a connected bulb stays on the mains and is controlled by Wi-Fi; an LED strip is installed continuously under or behind a unit. The decisive criterion is not the technology but whether there is a socket, or not, where you want it.\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003ccaption\u003eWireless bulb, mains bulb, LED strip: the differences\u003c\/caption\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eCriterion\u003c\/th\u003e\n\u003cth\u003eWireless LED light bulb\u003c\/th\u003e\n\u003cth\u003eMains LED bulb\u003c\/th\u003e\n\u003cth\u003eLED strip\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eRechargeable battery\u003c\/td\u003e\n\u003ctd\u003eMains, through the socket\u003c\/td\u003e\n\u003ctd\u003eDedicated power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo wiring, screws or stands\u003c\/td\u003e\n\u003ctd\u003eRequires a powered socket\u003c\/td\u003e\n\u003ctd\u003eSticks on, cut at the marks\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMovement\u003c\/td\u003e\n\u003ctd\u003eUnscrews and moves freely\u003c\/td\u003e\n\u003ctd\u003eStays in its fitting\u003c\/td\u003e\n\u003ctd\u003eFixed once installed\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrightness\u003c\/td\u003e\n\u003ctd\u003eLimited by the battery\u003c\/td\u003e\n\u003ctd\u003eContinuous\u003c\/td\u003e\n\u003ctd\u003eVaries with the length\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTypical use\u003c\/td\u003e\n\u003ctd\u003eBackup, accent, outdoors with no socket\u003c\/td\u003e\n\u003ctd\u003eMain lighting of a room\u003c\/td\u003e\n\u003ctd\u003eHighlighting a unit or a niche\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWireless LED light bulb or Wi-Fi connected bulb: do not confuse them\u003c\/h3\u003e\n\n\u003cp\u003eA connected bulb screws into a powered socket and is controlled from a phone. Without power, it does nothing. A wireless bulb does without a socket but cannot be controlled by an app. The choice therefore depends on the spot: if a supply exists, take a \u003ca href=\"\/collections\/ampoules-led-220v\"\u003e220 V bulb\u003c\/a\u003e or a \u003ca href=\"\/collections\/ampoules-led-a-variateur\"\u003edimmable bulb\u003c\/a\u003e; with no supply, the battery bulb remains the only viable option.\u003c\/p\u003e\n\n\u003ch3\u003eCuttable LED strip: how does it work?\u003c\/h3\u003e\n\n\u003cp\u003eA strip is cut at the marks printed along its length, then connected with a connector or a wire on the remaining end. Never cut outside a mark, or you lose the supply to the following diodes. It needs a dedicated power supply and stays fixed once installed. For a unit or a niche, it is a good complement; for a light you move around, the rechargeable bulb remains more flexible. Find all the references in \u003ca href=\"\/collections\/ampoules\"\u003ethe bulb range\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"installer\"\u003eHow do you install and maintain a wireless LED light bulb day to day?\u003c\/h2\u003e\n\n\u003cp\u003eYou screw the bulb into the socket like a classic bulb, switch it on, and unscrew it to recharge when the light dims. A dry cloth is enough for the glass. Outdoors, check the protection rating before leaving it outside and keep the contacts dry.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to check before buying: base, protection rating, format\u003c\/h3\u003e\n\n\u003cp\u003eFour checks are enough. The socket base, read from the marking. The format, height and diameter, compared with the space available in the shade or the housing. The protection rating, essential if the bulb is to stay outside: an IP44 resists water spray, a bulb with no rating stays indoors. Finally, the charging method and the presence of a remote control if the area is hard to reach. For a low-voltage installation, the \u003ca href=\"\/collections\/ampoules-led-12v\"\u003e12 V bulb range\u003c\/a\u003e avoids nasty surprises.\u003c\/p\u003e\n\n\u003ch3\u003eMistakes to avoid with wireless LED lighting\u003c\/h3\u003e\n\n\u003cp\u003eThe first mistake is buying without noting the base: an E27 does not fit an E14 socket, and the exchange costs a delivery. The second is leaving an unprotected bulb outside, or storing the contacts in damp conditions between uses. The third is waiting for failure to think about recharging: unscrew and recharge as soon as the light weakens, and you will not be left in the dark at the wrong moment. A bedside lamp or a hallway with no socket is prepared this way without stress. For main lighting, rely on classic \u003ca href=\"\/collections\/ampoules-led-1\"\u003eLED bulbs\u003c\/a\u003e and on \u003ca href=\"\/collections\/ampoules-pour-salon\"\u003ebulbs designed for the living room\u003c\/a\u003e, which offer continuous brightness.\u003c\/p\u003e\n\n\u003ch2 id=\"faq\"\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow do you switch the light on remotely without wires?\u003c\/summary\u003e\u003cp\u003eWith no wiring, switching on goes through a remote control, a motion sensor or a remote switch supplied with the device. The bulb or spotlight must be compatible with this control: check on the sheet that the remote control is included. Wi-Fi is not needed for this type of control.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat are the 5 types of bulbs?\u003c\/summary\u003e\u003cp\u003eThe main distinction is the base: E27 with a large screw thread, E14 with a small screw thread, GU10 and GU5.3 with pins for spotlights, G9 with two thin pins for small fittings. Add the shapes, globe, candle or spotlight, and the technologies, notably filament.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow does a cuttable LED strip work?\u003c\/summary\u003e\u003cp\u003eAn LED strip is cut at the marks printed along its length, then connected with a connector or a wire on the remaining end. Never cut outside a mark, or you lose the supply to the following diodes. The total length depends on the power supply provided for the strip.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eRechargeable wireless LED light bulb: how long does it light?\u003c\/summary\u003e\u003cp\u003eRuntime depends on the battery capacity and the brightness chosen: it is read on the model sheet, there is no single value. A bulb used as a night light lasts longer than one used as main lighting. Plan a second bulb or a regular recharge for daily use.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan you put a wireless LED light bulb in a chandelier or a ceiling light?\u003c\/summary\u003e\u003cp\u003eYes, if the base matches, usually E27 on a chandelier or a ceiling light. The bulb then runs on its battery, without being connected to the room circuit. Check the format and the weight accepted by the socket, as well as the access to unscrew it when recharging.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWireless LED lighting: what is the difference from a connected bulb?\u003c\/summary\u003e\u003cp\u003eA connected bulb stays screwed into a powered socket and is controlled by Wi-Fi or Bluetooth. A wireless bulb carries its own battery and lights without a socket, but is not controlled by an app. The choice therefore depends on whether there is a power supply where you want it.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan a wireless LED light bulb stay outside?\u003c\/summary\u003e\u003cp\u003eOnly if its sheet states a protection rating suited to outdoors, for example IP44 to resist water spray. A model with no protection rating stays indoors. Also avoid leaving the contacts in damp conditions and bring the bulb in for recharging.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003ch2 id=\"choisir\"\u003eHow do you choose between several models without getting it wrong?\u003c\/h2\u003e\n\n\u003cp\u003ePhotograph the socket, note the intended use and the room, then compare references on just three lines: base, colour temperature, protection rating. This mental sheet avoids back and forth. To widen the comparison, browse \u003ca href=\"\/collections\/luminaire\"\u003eall Designix light fittings\u003c\/a\u003e and cross-check with the \u003ca href=\"\/collections\/ampoules-led-a-filament-e27\"\u003eE27 filament bulbs\u003c\/a\u003e if you want a visible look, or the \u003ca href=\"\/collections\/ampoules-coloris-blanc\"\u003ewhite bulbs\u003c\/a\u003e for a more neutral light.\u003c\/p\u003e\n\n\u003cp\u003eOne last point: the battery ages. A battery bulb is not a final purchase like a mains bulb, it is replaced when the runtime becomes too short for the use. That is an argument for using it as accent lighting, where it really helps, and for entrusting main lighting to a \u003ca href=\"\/collections\/ampoules-12v\"\u003e12 V bulb\u003c\/a\u003e or a normally powered \u003ca href=\"\/collections\/ampoules-culot-e27\"\u003eE27 base reference\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eReassurance and ordering\u003c\/h3\u003e\n\n\u003cp\u003eSecure payment, tracked delivery, returns and Designix customer service: you order with peace of mind, and the team answers if the base or the protection rating leaves you unsure. Take the time to check your socket before confirming the basket, it is the only point that really blocks an installation.\u003c\/p\u003e\n\n\u003ch3\u003eTaking action\u003c\/h3\u003e\n\n\u003cp\u003eNote the base, choose the colour temperature, check the protection rating if the bulb goes outside. All that is left is to select your reference from \u003ca href=\"\/collections\/ampoules-retro\"\u003ethe retro bulbs\u003c\/a\u003e for a warm look, or from \u003ca href=\"\/collections\/ampoules\"\u003ethe Designix bulb range\u003c\/a\u003e to compare all the available models.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"CollectionPage\",\"name\":\"Wireless LED light bulbs: choosing a light with no plug or wiring\",\"description\":\"Rechargeable or battery wireless LED light bulbs: base, runtime and uses. Our guide to choosing and installing lighting without wiring.\",\"url\":\"https:\/\/designix.fr\/collections\/ampoules-led-sans-fil\",\"isPartOf\":{\"@type\":\"WebSite\",\"name\":\"Designix\",\"url\":\"https:\/\/designix.fr\"},\"speakable\":{\"@type\":\"SpeakableSpecification\",\"cssSelector\":[\"h1\",\"h2\"]}},{\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/designix.fr\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Lighting\",\"item\":\"https:\/\/designix.fr\/collections\/luminaire\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Bulbs\",\"item\":\"https:\/\/designix.fr\/collections\/ampoules\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"Wireless LED light bulbs: choosing a light with no plug or wiring\",\"item\":\"https:\/\/designix.fr\/collections\/ampoules-led-sans-fil\"}]},{\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How do you switch the light on remotely without wires?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"With no wiring, switching on goes through a remote control, a motion sensor or a remote switch supplied with the device. The bulb or spotlight must be compatible with this control: check on the sheet that the remote control is included. Wi-Fi is not needed for this type of control.\"}},{\"@type\":\"Question\",\"name\":\"What are the 5 types of bulbs?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The main distinction is the base: E27 with a large screw thread, E14 with a small screw thread, GU10 and GU5.3 with pins for spotlights, G9 with two thin pins for small fittings. Add the shapes (globe, candle, spotlight) and the technologies, notably filament.\"}},{\"@type\":\"Question\",\"name\":\"How does a cuttable LED strip work?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"An LED strip is cut at the marks printed along its length, then connected with a connector or a wire on the remaining end. Never cut outside a mark, or you lose the supply to the following diodes. The total length depends on the power supply provided for the strip.\"}},{\"@type\":\"Question\",\"name\":\"Rechargeable wireless LED light bulb: how long does it light?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Runtime depends on the battery capacity and the brightness chosen: it is read on the model sheet, there is no single value. A bulb used as a night light lasts longer than one used as main lighting. Plan a second bulb or a regular recharge for daily use.\"}},{\"@type\":\"Question\",\"name\":\"Can you put a wireless LED light bulb in a chandelier or a ceiling light?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, if the base matches, usually E27 on a chandelier or a ceiling light. The bulb then runs on its battery, without being connected to the room circuit. Check the format and the weight accepted by the socket, as well as the access to unscrew it when recharging.\"}},{\"@type\":\"Question\",\"name\":\"Wireless LED lighting: what is the difference from a connected bulb?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A connected bulb stays screwed into a powered socket and is controlled by Wi-Fi or Bluetooth. A wireless bulb carries its own battery and lights without a socket, but is not controlled by an app. The choice therefore depends on whether there is a power supply where you want it.\"}},{\"@type\":\"Question\",\"name\":\"Can a wireless LED light bulb stay outside?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Only if its sheet states a protection rating suited to outdoors, for example IP44 to resist water spray. A model with no protection rating stays indoors. Also avoid leaving the contacts in damp conditions and bring the bulb in for recharging.\"}}]}]}\u003c\/script\u003e","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/8598\/2228\/collections\/designix-entete-ampoules-led-sans-fil-v1.jpg?v=1793125847","url":"https:\/\/designix-lighting.com\/collections\/wireless-led-light-bulbs.oembed","provider":"Designix","version":"1.0","type":"link"}