{"title":"Waterproof outdoor LED strips","description":"\u003cp\u003eBefore buying, check three things: the IP rating, the supply voltage and the actual run length you need to cover. Weatherproof LED strip lights illuminate a terrace, a canopy or the edge of a pond continuously, but this check is what decides whether they will last several seasons or fail in the first winter.\u003c\/p\u003e\n\n\u003ch2 id=\"definition\"\u003eWhat are weatherproof LED strip lights?\u003c\/h2\u003e\n\u003cp\u003eWeatherproof LED strip lights are protected against water and dust by an IP rating, often IP65, IP67 or IP68. Silicone or resin encases the LEDs and the circuit. The higher the rating, the better the strip resists splashes, rain and then immersion.\u003c\/p\u003e\n\n\u003ch3\u003eWeatherproof LED strip lights IP65, IP67 or IP68: what is the difference?\u003c\/h3\u003e\n\u003cp\u003eIP65 withstands splashes and dust: this is the level for a canopy or a covered terrace. IP67 tolerates brief immersion, which suits a railing or a facade exposed to rain. IP68 is for prolonged immersion, under conditions set by the manufacturer.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eIP rating\u003c\/th\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003eTypical location\u003c\/th\u003e\n\u003cth\u003eTo avoid\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003ctd\u003eWater splashes and dust\u003c\/td\u003e\n\u003ctd\u003eUnder a canopy, a shelter, a covered terrace\u003c\/td\u003e\n\u003ctd\u003eDirect jets and immersion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003ctd\u003eShort temporary immersion\u003c\/td\u003e\n\u003ctd\u003eRailing, exposed facade, terrace edge\u003c\/td\u003e\n\u003ctd\u003eProlonged standing water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003ctd\u003eProlonged immersion according to the manufacturer\u003c\/td\u003e\n\u003ctd\u003ePool edge, SPA, pond\u003c\/td\u003e\n\u003ctd\u003eInstallation without checking voltage and connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat silicone really protects on outdoor LED strip\u003c\/h3\u003e\n\u003cp\u003eThe sheath or resin insulates the copper tracks and the solder joints, the weak points of a bare strip. They stop moisture from causing a short circuit and slow oxidation. This protection does not cover the ends: the cable gland and the connector finish the job. The \u003ca href=\"https:\/\/designix.fr\/collections\/rubans-led-etanches\"\u003eweatherproof LED strip collection\u003c\/a\u003e brings together sheathed and resin-coated models.\u003c\/p\u003e\n\n\u003ch2 id=\"tension\"\u003e12 V or 220 V: which weatherproof LED strip lights to choose?\u003c\/h2\u003e\n\u003cp\u003eWeatherproof LED strip lights in 12 V or 24 V run on a transformer and stay off mains voltage near a pond. 220 V connects directly to the mains and suits long facades, provided the waterproof connectors and the circuit power are respected.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCriterion\u003c\/th\u003e\n\u003cth\u003e12 V LED strip\u003c\/th\u003e\n\u003cth\u003e220 V LED strip\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eWeatherproof transformer to be placed in a dry spot\u003c\/td\u003e\n\u003ctd\u003eDirect connection to the mains\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength per circuit\u003c\/td\u003e\n\u003ctd\u003eLimited by voltage drop, re-feeding possible\u003c\/td\u003e\n\u003ctd\u003eLong facade possible with waterproof connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety near water\u003c\/td\u003e\n\u003ctd\u003eVery low voltage, suited to poolside areas\u003c\/td\u003e\n\u003ctd\u003eTo be reserved for dry, protected areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eLow-voltage cable easy to run along\u003c\/td\u003e\n\u003ctd\u003eConnection to be planned by a professional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaintenance\u003c\/td\u003e\n\u003ctd\u003eCheck the transformer and the junctions\u003c\/td\u003e\n\u003ctd\u003eCheck the cable glands and the connections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWeatherproof LED strip lights 12 V: transformer and safety\u003c\/h3\u003e\n\u003cp\u003eThe transformer, or driver, steps down the voltage and must stay in a dry area, never in a flood-prone zone. Its power is calculated from the connected run length, with a margin, otherwise it heats up and cuts out. Near a pond, this low voltage simplifies installation: see \u003ca href=\"\/collections\/rubans-led-24v\"\u003ethe 24 V low-voltage LED strips\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWeatherproof LED strip lights 220 V: what to check\u003c\/h3\u003e\n\u003cp\u003e220 V avoids the transformer and allows long runs without voltage drop. In return, every junction must be waterproof and mechanically solid, with cable glands and a closed box. On a facade or under a dry shelter, it is the simplest solution: browse \u003ca href=\"\/collections\/rubans-led-220v\"\u003ea 220 V outdoor LED strip\u003c\/a\u003e before finalising your installation plan.\u003c\/p\u003e\n\n\u003ch2 id=\"longueur\"\u003eWhat length of weatherproof LED strip lights for my terrace?\u003c\/h2\u003e\n\u003cp\u003eThe length of weatherproof LED strip lights is measured along the surface to be lit, not on the ground. Beyond several metres, voltage drop means you must re-feed the strip or choose a suitable cable gauge. Planning 10 m, 15 m or 30 m depends on the actual run length and the connectors.\u003c\/p\u003e\n\n\u003ch3\u003eWeatherproof LED strip lights 10 m or 15 m: how to measure?\u003c\/h3\u003e\n\u003cp\u003eFollow the path of the strip, corner by corner, with a flexible tape, and add the connection allowance. Ten metres cover the perimeter of a small terrace or a canopy; fifteen metres handle a medium terrace or the outline of a shelter. The length sold is never the usable length.\u003c\/p\u003e\n\n\u003ch3\u003eWeatherproof LED strip lights 30 m: avoiding voltage drop\u003c\/h3\u003e\n\u003cp\u003eOver thirty metres, the voltage gradually drops and the end of the strip dims. The answer lies in sections re-fed separately, or in a higher voltage with a suitable cable gauge. Compare the models in \u003ca href=\"\/collections\/rubans-led\"\u003eall LED strips\u003c\/a\u003e according to the actual run length to cover.\u003c\/p\u003e\n\n\u003ch2 id=\"recoupable\"\u003eCuttable LED strip: how does it work?\u003c\/h2\u003e\n\u003cp\u003eA cuttable LED strip is cut at the marks provided by the manufacturer, at regular intervals depending on the model. Cut only when powered off, then close the end with a suitable waterproof connector. Cutting between two marks or through the printed circuit makes the strip unusable and compromises waterproofing.\u003c\/p\u003e\n\n\u003ch3\u003eCan you cut an LED strip that is too long?\u003c\/h3\u003e\n\u003cp\u003eYes, at a cutting mark, with scissors or pliers. The cut section remains usable if it is re-fed through a waterproof connector. However, the resulting end is no longer protected: without an end cap or cable gland, moisture gets in and attacks the tracks.\u003c\/p\u003e\n\n\u003ch3\u003eWhere to cut without losing waterproofing?\u003c\/h3\u003e\n\u003cp\u003eCut exactly in the middle of the printed marks, never a few millimetres off. Close it immediately with a waterproof end cap from the same series as the strip. This finishing step is what makes an installation last, and it is also the point to check in the \u003ca href=\"\/collections\/rubans-led-etanches\"\u003eselection of weatherproof outdoor LED strips\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"ou-installer\"\u003eWhere to install weatherproof LED strip lights?\u003c\/h2\u003e\n\u003cp\u003eWeatherproof LED strip lights are installed under a canopy, along a terrace, on a railing, on a facade or around a pond. Each location requires a suitable IP rating and a mounting that does not trap water. Avoid hollows where water collects and areas exposed to direct jets.\u003c\/p\u003e\n\n\u003ch3\u003eUnder a canopy: outdoor ceiling LED lighting\u003c\/h3\u003e\n\u003cp\u003eUnder a canopy, the strip runs along the beam and lights the table without glare: the light grazes the ceiling and comes back down. IP65 is usually enough, but a cleaning jet means going up one level. An aluminium profile ensures flatness and dissipates heat.\u003c\/p\u003e\n\n\u003ch3\u003eTerrace, railing, pool edge: the right IP ratings\u003c\/h3\u003e\n\u003cp\u003eOn a railing or an exposed facade, water runs down: IP67 is the reasonable minimum. At the edge of a pond or a SPA, accidental immersion is possible and very low voltage is essential. Look at \u003ca href=\"\/collections\/rubans-led-pour-piscine\"\u003epool LED lighting\u003c\/a\u003e and, for the shade, \u003ca href=\"\/collections\/rubans-led-3000k\"\u003e3000 K LED strips\u003c\/a\u003e which give a warm white without turning yellow.\u003c\/p\u003e\n\n\u003ch2 id=\"installation\"\u003eHow to install and maintain weatherproof LED strip lights?\u003c\/h2\u003e\n\u003cp\u003eInstallation starts with a clean, dry surface, an aluminium profile that dissipates heat and waterproof connectors. The strip is glued or fixed without tension. Once a season, check the junctions, remove leaves and limescale, and make sure the transformer stays dry.\u003c\/p\u003e\n\n\u003ch3\u003eWhich profile and mounting for a weatherproof LED strip?\u003c\/h3\u003e\n\u003cp\u003eThe aluminium profile acts as a heat sink: a strip glued to a bare surface heats up and loses intensity. Choose a profile with a diffuser if the LED line must stay discreet. Fixing is done with clips or screws, never by tension on the power cable.\u003c\/p\u003e\n\n\u003ch3\u003eCleaning and checking an outdoor LED strip season after season\u003c\/h3\u003e\n\u003cp\u003eA soft cloth and soapy water are enough; solvents dull the sheath. Check that the cable glands are tight and that there is no water in the boxes. To vary the shade of a lounge area, compare \u003ca href=\"\/collections\/rubans-led-rgb\"\u003eRGB LED strips\u003c\/a\u003e and \u003ca href=\"\/collections\/rubans-led-rgbw\"\u003eRGBW LED strips\u003c\/a\u003e, the latter adding a dedicated white.\u003c\/p\u003e\n\n\u003ch2 id=\"meilleur\"\u003eWhat are the best weatherproof LED strip lights?\u003c\/h2\u003e\n\u003cp\u003eThere is no single best weatherproof LED strip for every use. The right choice depends on the location, the IP rating, the available voltage, the length and the type of light wanted. A strip suited to a pond is not the one that lights a dry facade.\u003c\/p\u003e\n\n\u003ch3\u003eThe criteria that matter for an outdoor LED strip\u003c\/h3\u003e\n\u003cp\u003eIn order: the IP rating actually needed, the voltage available on site, the run length to cover, the colour temperature and the quality of the connectors. A warm white around 2700 to 3000 K suits terraces; a more neutral white lights an outdoor worktop better. See \u003ca href=\"\/collections\/rubans-led-2700k\"\u003e2700 K LED strips\u003c\/a\u003e for a very warm ambient light.\u003c\/p\u003e\n\n\u003ch3\u003eMistakes to avoid before buying\u003c\/h3\u003e\n\u003cp\u003eOverestimating the length a single circuit can handle, forgetting the transformer in a dry spot, cutting off-mark, neglecting the corners: these four mistakes come up most often. Also count the total consumption so as not to overload the power supply. To place the strip within a complete project, browse \u003ca href=\"\/collections\/luminaire\"\u003eall our light fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"achat\"\u003eChoosing and ordering without mistakes\u003c\/h2\u003e\n\u003cp\u003eFirst identify the exact run length and the location, then the voltage, then the IP rating. This sequence avoids buying a strip unsuited to its surface. \u003ca href=\"\/collections\/rubans-led-24v\"\u003e24 V LED strips\u003c\/a\u003e limit voltage drop over long runs, while \u003ca href=\"\/collections\/rubans-led-220v\"\u003e220 V LED strips\u003c\/a\u003e simplify connection under a dry canopy.\u003c\/p\u003e\n\u003cp\u003eAt Designix, payment is secure, delivery is tracked and returns are handled by customer service. A question about an IP rating or a connector before confirming: Designix customer service answers before the purchase, not after. Find the references in \u003ca href=\"\/collections\/rubans-led-etanches\"\u003eweatherproof outdoor LED strips\u003c\/a\u003e and the whole catalogue in \u003ca href=\"\/collections\/luminaire\"\u003eour lighting catalogue\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"faq\"\u003eFrequently asked questions about weatherproof LED strip lights\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat are the best LED strip lights?\u003c\/summary\u003e\u003cp\u003eThe best LED strip depends on the use. For outdoors, compare the IP rating, the voltage, the length, the colour temperature and the quality of the waterproof connectors. An IP68 12 V strip suits near a pond; an IP65 220 V strip is enough under a sheltered canopy.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan you cut an LED strip that is too long?\u003c\/summary\u003e\u003cp\u003eYes, provided you cut at a mark specified by the manufacturer. The strip then separates into a section that is still usable, to be re-fed with a waterproof connector. An off-mark cut breaks the circuit and leaves an unprotected end.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCuttable LED strip: how does it work?\u003c\/summary\u003e\u003cp\u003eLocate the cutting mark printed on the strip, cut when powered off with scissors or pliers, then close the end with a waterproof connector. The cut section remains usable if it is re-fed. Cutting between two marks destroys the circuit.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWeatherproof LED strip lights 12 V: how to power them?\u003c\/summary\u003e\u003cp\u003eA 12 V strip is powered by a weatherproof transformer placed in a sheltered spot, with a power suited to the connected length. The low-voltage cable can run along the terrace. The transformer must never stay in a flood-prone area, even if the strip is IP68.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan an IP68 weatherproof LED strip stay immersed?\u003c\/summary\u003e\u003cp\u003eAn IP68 strip is designed for temporary immersion, not for permanent operation underwater without the manufacturer's verification. For a pond or a SPA, it must be powered at very low voltage and installed according to the product instructions. The IP rating does not replace safety rules. See also \u003ca href=\"\/collections\/rubans-led-pour-piscine\"\u003estrips for ponds and SPAs\u003c\/a\u003e.\u003c\/p\u003e\u003c\/details\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"CollectionPage\",\"name\":\"Weatherproof LED strip lights: choosing, cutting and installing\",\"description\":\"IP, voltage, length, cutting: understand what makes outdoor LED strip truly weatherproof, where to place it and how to install it without mistakes.\",\"url\":\"https:\/\/designix.fr\/collections\/rubans-led-d-exterieur-etanches\",\"isPartOf\":{\"@type\":\"WebSite\",\"name\":\"Designix\",\"url\":\"https:\/\/designix.fr\"},\"speakable\":{\"@type\":\"SpeakableSpecification\",\"cssSelector\":[\"h1\",\"h2\"]}},{\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/designix.fr\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Lighting\",\"item\":\"https:\/\/designix.fr\/collections\/luminaire\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Strips\",\"item\":\"https:\/\/designix.fr\/collections\/rubans\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"Weatherproof LED strip lights: choosing, cutting and installing\",\"item\":\"https:\/\/designix.fr\/collections\/rubans-led-d-exterieur-etanches\"}]},{\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What are the best LED strip lights?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The best LED strip depends on the use. For outdoors, compare the IP rating, the voltage, the length, the colour temperature and the quality of the waterproof connectors. An IP68 12 V strip suits near a pond; an IP65 220 V strip is enough under a sheltered canopy.\"}},{\"@type\":\"Question\",\"name\":\"Can you cut an LED strip that is too long?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, provided you cut at a mark specified by the manufacturer. The strip then separates into a section that is still usable, provided it is re-fed with a waterproof connector. An off-mark cut breaks the circuit and leaves an unprotected end.\"}},{\"@type\":\"Question\",\"name\":\"Cuttable LED strip: how does it work?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Locate the cutting mark printed on the strip, cut when powered off with scissors or pliers, then close the end with a waterproof connector. The cut section remains usable if it is re-fed. Cutting between two marks destroys the circuit.\"}},{\"@type\":\"Question\",\"name\":\"Weatherproof LED strip lights 12 V: how to power them?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A 12 V strip is powered by a weatherproof transformer placed in a sheltered spot, with a power suited to the connected length. The low-voltage cable can run along the terrace. The transformer must never stay in a flood-prone area, even if the strip is IP68.\"}},{\"@type\":\"Question\",\"name\":\"Weatherproof LED strip lights 10 m: is that enough for a terrace?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Ten metres cover the perimeter of a small terrace or a canopy, provided you allow for connectors and corners. The usable length is measured along the surface. Beyond that, voltage drop may require re-feeding the strip at several points.\"}},{\"@type\":\"Question\",\"name\":\"Weatherproof LED strip lights 30 m: how to avoid voltage drop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Over thirty metres, voltage drop becomes noticeable at 12 V. You must either re-feed the strip every few metres, or choose a higher voltage or a suitable cable gauge. The length is divided into sections powered separately rather than a single circuit.\"}},{\"@type\":\"Question\",\"name\":\"Can an IP68 weatherproof LED strip stay immersed?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"An IP68 strip is designed for temporary immersion, not for permanent operation underwater without the manufacturer's verification. For a pond or a SPA, it must be powered at very low voltage and installed according to the product instructions. The IP rating does not replace safety rules.\"}}]}]\u003c\/script\u003e","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/8598\/2228\/collections\/designix-entete-rubans-led-d-exterieur-etanches-v1.jpg?v=1793388889","url":"https:\/\/designix-lighting.com\/collections\/weatherproof-led-strip-lights.oembed","provider":"Designix","version":"1.0","type":"link"}