{"title":"Solar LED strip lights for outdoor use","description":"\u003cp\u003eStart by measuring the actual run, including returns and corners, then choose the protection rating according to how exposed the area is: this order avoids rework. Solar outdoor LED strip lights illuminate without cable or socket, provided you place the panel in sunlight and choose a white suited to the evening mood.\u003c\/p\u003e\n\n\u003ch2 id=\"lumiere\"\u003eWhat light does a solar outdoor LED strip give?\u003c\/h2\u003e\n\u003cp\u003eSolar outdoor LED strip lights give a grazing, indirect light: placed under an awning or along a low wall, they highlight the material rather than lighting a work area. The choice of white, from very warm to neutral, sets the mood, and runtime depends on sunshine and the mode used.\u003c\/p\u003e\n\n\u003ch3\u003eWarm white or neutral white: which mood for the evening?\u003c\/h3\u003e\n\u003cp\u003eA very warm white, around 2700 K, flatters stone, wood and gravel, and gives a terrace that invites you to stay. A warm white of 3000 K stays close, with a slightly more legible line. A neutral white, around 4000 K, is used when you need to move around, tidy up or eat outside. The useful rule: one single white family per area, otherwise the result becomes patchy. The \u003ca href=\"https:\/\/designix.fr\/collections\/rubans-led-2700k\"\u003every warm 2700 K lights\u003c\/a\u003e and the \u003ca href=\"\/collections\/rubans-led-3000k\"\u003e3000 K references\u003c\/a\u003e cover these two most requested moods.\u003c\/p\u003e\n\n\u003ch3\u003eSolar panel and battery: what does runtime depend on?\u003c\/h3\u003e\n\u003cp\u003eRuntime is not a fixed value: it follows the season's sunshine, the panel's orientation, the cleanliness of its surface and the mode chosen. A panel in shade for part of the day recharges less, a cold battery delivers less, an animated mode uses more than a simple switch-on. Remember the principle rather than a figure: the more sun the panel sees, the longer the evening lasts. The rest of the range can be found in \u003ca href=\"\/collections\/luminaire\"\u003ethe entire lighting range\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"emplacements\"\u003eWhere to install a solar LED strip outdoors?\u003c\/h2\u003e\n\u003cp\u003eThe best locations are those where the strip lights without being seen: under a pergola, along the top of a low wall, on a step edge, along a base course or around a pond. Each area dictates its protection rating and its fixing method.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ccaption\u003eWhich strip for which location\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLocation\u003c\/th\u003e\n\u003cth\u003eDesired effect\u003c\/th\u003e\n\u003cth\u003eDecisive criterion\u003c\/th\u003e\n\u003cth\u003eWatch point\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePergola, awning\u003c\/td\u003e\n\u003ctd\u003eIndirect light above the table\u003c\/td\u003e\n\u003ctd\u003eFixing at the beam head and suitable protection\u003c\/td\u003e\n\u003ctd\u003eThe panel must stay in sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow wall, step, path\u003c\/td\u003e\n\u003ctd\u003eDiscreet marking that does not dazzle\u003c\/td\u003e\n\u003ctd\u003eSlim strip, warm white, fitted on the step edge\u003c\/td\u003e\n\u003ctd\u003eWear on the leading edge of the support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFacade, base course\u003c\/td\u003e\n\u003ctd\u003eHighlight the material and depth\u003c\/td\u003e\n\u003ctd\u003eIP65 minimum, length measured with returns\u003c\/td\u003e\n\u003ctd\u003eShadow cast on the panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePond surroundings\u003c\/td\u003e\n\u003ctd\u003eReflection on the water\u003c\/td\u003e\n\u003ctd\u003eImmersion rating and fixing outside the bathing area\u003c\/td\u003e\n\u003ctd\u003eNo immersion without IP68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eUnder a pergola or awning: indirect lighting without a socket\u003c\/h3\u003e\n\u003cp\u003eFixed at the beam head, the strip sends its light upwards or towards the structure, and the table stays in a soft glow. There is a double constraint: the strip must be protected from slanting rain, and the solar panel must stay clear of foliage. \u003ca href=\"\/collections\/rubans-led-etanches\"\u003eWaterproof LED strips\u003c\/a\u003e meet the first, the layout meets the second.\u003c\/p\u003e\n\n\u003ch3\u003eLow wall, step and path: marking without running cable\u003c\/h3\u003e\n\u003cp\u003eOn a step edge or along the top of a low wall, the goal changes: you need to see the relief without being dazzled. A slim strip, in warm white, placed on the side opposite the view, draws a clean line. On a path edge, adhesive alone does not last long, an aluminium profile or mechanical clips hold better. Water surroundings require an immersion rating, to be checked in \u003ca href=\"\/collections\/rubans-led-pour-piscine\"\u003epond and pool lighting\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"ip\"\u003eWhich IP protection rating to choose for an outdoor LED strip?\u003c\/h2\u003e\n\u003cp\u003eChoose the rating according to actual exposure: IP44 for a covered area, IP65 as soon as rain or spray touches the strip, IP67 for occasional immersion and IP68 if the strip stays in water. The rating describes the protection of the casing, not the quality of the light.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ccaption\u003eProtection rating and outdoor use\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRating\u003c\/th\u003e\n\u003cth\u003eWhat the rating guarantees\u003c\/th\u003e\n\u003cth\u003eSuitable locations\u003c\/th\u003e\n\u003cth\u003eTo avoid\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003ctd\u003eProtected against water splashes\u003c\/td\u003e\n\u003ctd\u003eUnder an awning, a covered pergola, a loggia\u003c\/td\u003e\n\u003ctd\u003eDirect rain and water spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003ctd\u003eProtected against water jets\u003c\/td\u003e\n\u003ctd\u003eFacade, low wall, open terrace, path\u003c\/td\u003e\n\u003ctd\u003eImmersion and high-pressure cleaning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003ctd\u003eResists temporary immersion\u003c\/td\u003e\n\u003ctd\u003ePond edge, occasionally wet area\u003c\/td\u003e\n\u003ctd\u003ePermanent stay under water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003ctd\u003eDesigned for prolonged immersion\u003c\/td\u003e\n\u003ctd\u003eFountain, pond, swimming pond\u003c\/td\u003e\n\u003ctd\u003eFixing not intended by the manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eIP65, IP67, IP68: what the figure really allows\u003c\/h3\u003e\n\u003cp\u003eThe first digit concerns solids, the second water. An IP65 withstands jets, not staying in water. An IP67 withstands a passage under water, not a year immersed. IP68 is the only one intended to stay in water, and even then, under the conditions the manufacturer describes. Reading these two digits avoids ordering a strip unsuited to the area.\u003c\/p\u003e\n\n\u003ch3\u003eWaterproof does not mean immersible\u003c\/h3\u003e\n\u003cp\u003eA strip described as waterproof resists humidity, splashes and rain, which is enough on a facade or a low wall. Placing it in a pond without an immersion rating leads to a quick failure, and sometimes to a complete redo. In a damp area without contact with water, a \u003ca href=\"\/collections\/rubans-led-etanches\"\u003erange designed for humidity\u003c\/a\u003e remains the right compromise.\u003c\/p\u003e\n\n\u003ch2 id=\"longueur\"\u003eHow to choose the length and voltage of a solar LED strip?\u003c\/h2\u003e\n\u003cp\u003eLength is measured with returns and corners, not by the linear metre of wall, and voltage decides the possible length: 24 V holds a longer line than 12 V without visible loss at the end. LED density sets the fineness of the light line and the power available per metre.\u003c\/p\u003e\n\n\u003ch3\u003e12 V, 24 V or 220 V: which voltage for which length?\u003c\/h3\u003e\n\u003cp\u003e12 V suits short lines and is easy to cut, with a noticeable light drop at the end of the line if you extend it. 24 V is the usual voltage for long lines in one piece, to be found in the \u003ca href=\"\/collections\/rubans-led-24v\"\u003e24 V models\u003c\/a\u003e. 220 V removes the transformer but imposes rarer cutting marks: see the \u003ca href=\"\/collections\/rubans-led-220v\"\u003e220 V mains strips\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eLED density: reading the data sheet without getting it wrong\u003c\/h3\u003e\n\u003cp\u003eThe closer the LEDs, the more continuous the line appears and the higher the power per metre climbs. A low-density strip gives a string of dots, which can suit marking and much less a mood line. If one value on the data sheet contradicts another (a tiny stated flux with high power, for example), keep the power and ignore the flux.\u003c\/p\u003e\n\n\u003ch2 id=\"recoupe\"\u003eCuttable LED strip: how does it work?\u003c\/h2\u003e\n\u003cp\u003eA cuttable strip is cut only at the marks printed on the circuit, never between two. Each section remains usable if it is re-powered from its intended end. Cutting elsewhere interrupts the circuit and the part after the cut no longer lights up.\u003c\/p\u003e\n\n\u003ch3\u003eLocate the cutting mark before cutting\u003c\/h3\u003e\n\u003cp\u003eThe cutting pitch depends on the model and the voltage: two strips are not cut in the same place. Locate the lines and the connection pads, measure twice, cut cleanly with a clean tool. A strip cut outside the mark cannot be repaired, and the lost portion cannot be recovered.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to do with the remaining section?\u003c\/h3\u003e\n\u003cp\u003eA correctly cut section remains a complete strip: it is re-powered from its end and can equip a second low wall or the underside of a staircase. Plan the connector matching the model before cutting, otherwise the section remains unused. The rest of the catalogue can be browsed in \u003ca href=\"\/collections\/rubans-led\"\u003ethe LED strip collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"usage\"\u003eWhich solar LED strip for which outdoor use?\u003c\/h2\u003e\n\u003cp\u003eThe choice depends on what the area should deliver: indirect light above a terrace table, discreet marking along a step, or a reflection on water. Exposure decides the protection rating, the length of the run decides the voltage, and the white decides the mood.\u003c\/p\u003e\n\n\u003ch3\u003eCovered terrace or open garden: two different constraints\u003c\/h3\u003e\n\u003cp\u003eUnder a covered terrace, the strip is protected from rain but the solar panel must extend beyond the roof to capture. In an open garden, the opposite: the panel finds the sun easily, and it is the strip that must withstand the rain. Two fixing logics, then, for the same lighting gesture.\u003c\/p\u003e\n\n\u003ch3\u003ePond edge: caution before effect\u003c\/h3\u003e\n\u003cp\u003eThe reflection on water is one of the most beautiful effects of a strip, and the riskiest to install. You need a real immersion rating, a fixing outside the bathing area and a solar power supply placed away from splashes. If the data sheet does not give the rating, choose another location. The \u003ca href=\"\/collections\/rubans-led-rgb\"\u003eRGB multicolour strips\u003c\/a\u003e and the \u003ca href=\"\/collections\/rubans-led-rgbw\"\u003eRGBW versions with adjustable white\u003c\/a\u003e also open up colour play.\u003c\/p\u003e\n\n\u003ch2 id=\"pose\"\u003eHow to install and maintain a solar LED strip?\u003c\/h2\u003e\n\u003cp\u003ePlace the strip on a clean, dry surface, in a profile or on a support that holds it, then orient the solar panel towards the sun's path, without cast shadow. Cleaning the panel and the strip with clear water twice a year is enough to preserve the effect.\u003c\/p\u003e\n\n\u003ch3\u003eFix the strip so it lasts several summers\u003c\/h3\u003e\n\u003cp\u003eThe original adhesive holds on a flat, degreased and dry surface, but gives way on irregular stone and under temperature variations. An aluminium profile or mechanical clips take over the work, protect the circuit and make access to the connector easier. Test the switch-on before permanently locking the position.\u003c\/p\u003e\n\n\u003ch3\u003eKeep the solar panel clean and well oriented\u003c\/h3\u003e\n\u003cp\u003eA dusty panel, shaded by a branch or dirtied by spray recharges less, and the evening shortens. A wipe with clear water, without product, and a check of the orientation at the change of season make up the essentials. Think about storing the battery if the cold damages it. The complete guide is in \u003ca href=\"\/collections\/luminaire\"\u003ethe Designix lighting catalogue\u003c\/a\u003e, with secure payment, tracked delivery, returns and attentive customer service.\u003c\/p\u003e\n\n\u003ch2 id=\"erreurs\"\u003eWhich mistakes to avoid before buying a solar LED strip?\u003c\/h2\u003e\n\u003cp\u003eThe costliest mistakes: measuring your wall without counting returns, confusing mood lighting with functional lighting, placing an unprotected strip in a rain area, and fixing the solar panel in shade. Checking the protection rating and the support before ordering avoids rework.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSurvey the run on site, returns and corners included, rather than estimating by eye.\u003c\/li\u003e\n\u003cli\u003eExpect mood light from a solar strip, not the lighting of a work area.\u003c\/li\u003e\n\u003cli\u003eChoose the IP rating according to actual exposure and not according to the product's looks.\u003c\/li\u003e\n\u003cli\u003ePlan the support or profile from the order, without relying on adhesive alone.\u003c\/li\u003e\n\u003cli\u003eLocate the panel's position before fixing the strip, not after.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo compare the families before deciding, browse \u003ca href=\"\/collections\/rubans-led\"\u003eall the home's LED strips\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"faq\"\u003eFrequently asked questions about solar LED strips\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan a solar LED strip be left outside all year round?\u003c\/summary\u003e\u003cp\u003eIt depends on its protection rating and the season: a strip intended for outdoor use withstands rain and moderate frost, but a very cold battery loses capacity. In spray or snow areas, check the fixings and the condition of the panel in spring.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhy does my solar LED strip light less in winter?\u003c\/summary\u003e\u003cp\u003eIn winter, the day is shorter and the panel captures less energy, while the battery handles cold poorly. A dirty or partly shaded panel makes it worse. Clean the panel, check its orientation and use the most economical mode.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan a solar LED strip replace an LED ceiling light on a covered terrace?\u003c\/summary\u003e\u003cp\u003eNo, the two do not do the same job: an LED ceiling light lights an area for moving around or eating, a solar strip highlights a surface and creates a mood. On a covered terrace, the strip complements functional lighting, it does not replace it.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow many metres of LED strip should be planned for a terrace?\u003c\/summary\u003e\u003cp\u003eMeasure the actual run, returns and corners included, then add the reserve needed for connectors and fixing passages. Better to survey the perimeter on site than to estimate by eye: it is the difference between the wall and the run that forces a reorder.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhich white temperature to choose for outdoors?\u003c\/summary\u003e\u003cp\u003eA very warm white relaxes a terrace in the evening and flatters stone and wood. A more neutral white stays legible for moving around, tidying up or eating outside. The essential is to keep a single white family in the same area to avoid a patchy result.\u003c\/p\u003e\u003c\/details\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"CollectionPage\",\"name\":\"Solar outdoor LED strip lights: choosing and installing autonomous lighting\",\"description\":\"Which solar LED strip for your terrace, pergola or low wall? IP criteria, voltage, white temperature and installation, explained simply by Designix.\",\"url\":\"https:\/\/designix.fr\/collections\/rubans-led-d-exterieur-solaires\",\"isPartOf\":{\"@type\":\"WebSite\",\"name\":\"Designix\",\"url\":\"https:\/\/designix.fr\"},\"speakable\":{\"@type\":\"SpeakableSpecification\",\"cssSelector\":[\"h1\",\"h2\"]}},{\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/designix.fr\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Lighting\",\"item\":\"https:\/\/designix.fr\/collections\/luminaire\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Strips\",\"item\":\"https:\/\/designix.fr\/collections\/rubans\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"Solar outdoor LED strip lights: choosing and installing autonomous lighting\",\"item\":\"https:\/\/designix.fr\/collections\/rubans-led-d-exterieur-solaires\"}]},{\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Cuttable LED strip: how does it work?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The strip is cut at the marks printed on the circuit, never between two. Each section remains usable if it is re-powered from its intended end. A cut outside the mark interrupts the circuit: the portion after the cut no longer lights up, and the strip cannot be repaired.\"}},{\"@type\":\"Question\",\"name\":\"How to install a solar LED strip?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Clean and dry the surface, place the strip in a profile or on a support that holds it, then fix the solar panel facing the sun, without cast shadow. Connect the strip to the box according to the instructions, then check the switch-on before locking everything in position.\"}},{\"@type\":\"Question\",\"name\":\"Can a solar LED strip be left outside all year round?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It depends on its protection rating and the season: a strip intended for outdoor use withstands rain and moderate frost, but a very cold battery loses capacity. In spray or snow areas, check the fixings and the condition of the panel in spring.\"}},{\"@type\":\"Question\",\"name\":\"Why does my solar LED strip light less in winter?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"In winter, the day is shorter and the panel captures less energy, while the battery handles cold poorly. A dirty or partly shaded panel makes it worse. Clean the panel, check its orientation and use the most economical mode.\"}},{\"@type\":\"Question\",\"name\":\"Can a solar LED strip replace an LED ceiling light on a covered terrace?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, the two do not do the same job: an LED ceiling light lights an area for moving around or eating, a solar strip highlights a surface and creates a mood. On a covered terrace, the strip complements functional lighting, it does not replace it.\"}},{\"@type\":\"Question\",\"name\":\"Which white temperature to choose for outdoors?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A very warm white relaxes a terrace in the evening and flatters stone and wood. A more neutral white stays legible for moving around, tidying up or eating outside. The essential is to keep a single white family in the same area to avoid a patchy result.\"}},{\"@type\":\"Question\",\"name\":\"How many metres of LED strip should be planned for a terrace?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Measure the actual run, returns and corners included, then add the reserve needed for connectors and fixing passages. Better to survey the perimeter on site than to estimate by eye: it is the difference between the wall and the run that forces a reorder.\"}}]}]}\u003c\/script\u003e","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/8598\/2228\/collections\/designix-entete-rubans-led-d-exterieur-solaires-v1.jpg?v=1793418250","url":"https:\/\/designix-lighting.com\/collections\/solar-outdoor-led-strip-lights.oembed","provider":"Designix","version":"1.0","type":"link"}