{"title":"Recessed outdoor table lamps","description":"\u003cp\u003ePlan for one recessed fixture per zone to be marked: a ground model along the path, a wall model near the threshold, a ceiling model above the table. The location decides the type of recess, the beam orientation and the protection rating before the style.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"#ou-installer\"\u003eWhere to install a recessed light\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#type-encastrable\"\u003eTerrace or path: which type\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#indice-ip\"\u003eWhich IP rating\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#lumiere-terrasse\"\u003eWhich light in the evening\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#branchement\"\u003eWiring several lamps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#pose-spots\"\u003eInstalling ceiling spots\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#ampoule-e27\"\u003eE27 bulb and sockets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#materiaux-style\"\u003eMaterials and style\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#entretien\"\u003eMaintenance and durability\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 id=\"ou-installer\"\u003eWhere to install an outdoor recessed light?\u003c\/h2\u003e\n\u003cp\u003eAn outdoor recessed light goes into the ground to mark a path, into a wall or facade to signal an entrance, or into a terrace ceiling to light a table. The location sets the type of recess, the beam orientation and the protection rating to choose.\u003c\/p\u003e\n\n\u003ch3\u003eIn which outdoor spaces should a recessed light be placed?\u003c\/h3\u003e\n\u003cp\u003ePath, terrace, facade, staircase, entrance, pool surround: each space has its own constraint. Along a path, the recessed light sits flush with the surface and lights the step without obstructing passage. On a facade, it draws a halo near the threshold or the house number. In a covered terrace ceiling, it lights the dinner table.\u003c\/p\u003e\n\n\u003ch3\u003eGround, wall or ceiling recess: what is the difference?\u003c\/h3\u003e\n\u003cp\u003eIn the ground, the housing goes into the slab or the base and withstands foot traffic. In a wall, it is recessed into the render or a dedicated box, at a height that avoids direct glare. In a ceiling or soffit, installation requires access from above for the connection. To compare lighting families, browse \u003ca href=\"https:\/\/designix.fr\/collections\/luminaire\"\u003ethe Designix lighting catalogue\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"type-encastrable\"\u003eWhich type of recessed light for a terrace or a path?\u003c\/h2\u003e\n\u003cp\u003eFor a path, a ground recessed light directs light toward the walkway without glare. For a terrace, a wall or ceiling model lights the table and the facades. The choice depends on the available height, the direction of travel and whether you want to illuminate or mark the way.\u003c\/p\u003e\n\n\u003ch3\u003eGround recess to mark a path\u003c\/h3\u003e\n\u003cp\u003ePlace the points on the side opposite the arriving step and aim the beam toward the ground, never toward the eye. Space them evenly to avoid dark gaps between two sources. A model whose trim stays flush limits the risk of catching the mower and the foot.\u003c\/p\u003e\n\n\u003ch3\u003eWall or ceiling recess to light a terrace\u003c\/h3\u003e\n\u003cp\u003eA covered terrace benefits from two or three ceiling points, offset from directly above the table so no shadow falls on the plates. On the wall side, the recessed wall light signals the entrance and extends the light toward the ground. The \u003ca href=\"\/collections\/lampes-a-poser-orientables\"\u003eadjustable lamps\u003c\/a\u003e give an idea of the beam settings available elsewhere.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ccaption\u003eChoosing an outdoor recessed light by location\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eLocation\u003c\/th\u003e\n\u003cth\u003eType of recessed light\u003c\/th\u003e\n\u003cth\u003eWhat it lights\u003c\/th\u003e\n\u003cth\u003ePoint to check\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePath and garden\u003c\/td\u003e\n\u003ctd\u003eGround, adjustable\u003c\/td\u003e\n\u003ctd\u003eThe walkway and the steps\u003c\/td\u003e\n\u003ctd\u003eResistance to water and foot traffic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFacade and entrance\u003c\/td\u003e\n\u003ctd\u003eRecessed wall\u003c\/td\u003e\n\u003ctd\u003eThe threshold and the number\u003c\/td\u003e\n\u003ctd\u003eFixing in the substrate and sealing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCovered terrace\u003c\/td\u003e\n\u003ctd\u003eCeiling or soffit\u003c\/td\u003e\n\u003ctd\u003eThe table and the surround\u003c\/td\u003e\n\u003ctd\u003eClearance and connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutdoor staircase\u003c\/td\u003e\n\u003ctd\u003eWall or step\u003c\/td\u003e\n\u003ctd\u003eThe steps without glare\u003c\/td\u003e\n\u003ctd\u003eBeam orientation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePool or wet area\u003c\/td\u003e\n\u003ctd\u003eWatertight ground or wall\u003c\/td\u003e\n\u003ctd\u003eThe pool surround\u003c\/td\u003e\n\u003ctd\u003eIP rating suited to the exposure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 id=\"indice-ip\"\u003eWhich IP protection rating for an outdoor recessed light?\u003c\/h2\u003e\n\u003cp\u003eThe IP rating indicates a light's resistance to dust and water. For an outdoor recessed light, it is chosen according to exposure: under shelter, on a facade or in the ground in a wet area. The exact value appears on the product sheet, not in a generic guide.\u003c\/p\u003e\n\n\u003ch3\u003eIP rating and real exposure: how to read the sheet?\u003c\/h3\u003e\n\u003cp\u003eThe first digit concerns solids, the second liquids. In general, a point placed under an awning does not face the same splashes as a model flush with a lawn or near a pool. Common ratings range from IP44 (splashes) to IP67 (temporary immersion). A higher number never makes up for a sloppy installation.\u003c\/p\u003e\n\n\u003ch3\u003eWet area, splashes, dust: the questions to ask\u003c\/h3\u003e\n\u003cp\u003eAsk where the light will actually be installed, whether it receives pressure washer jets, whether it stays submerged after rain. Also check water drainage around the housing. The \u003ca href=\"\/collections\/lampes-a-poser-led-design\"\u003edesign LED solutions\u003c\/a\u003e show how the source and sealing are handled together on other lighting families.\u003c\/p\u003e\n\n\u003ch2 id=\"lumiere-terrasse\"\u003eWhich light to illuminate a terrace in the evening?\u003c\/h2\u003e\n\u003cp\u003eA terrace is composed with two layers: ambient light, diffuse and low-glare, and functional light near the walkways and the table. Colour temperature and beam orientation matter more than the stated wattage, especially in a small space.\u003c\/p\u003e\n\n\u003ch3\u003eAmbient light or functional lighting?\u003c\/h3\u003e\n\u003cp\u003eAmbience comes from a flux directed toward the facade or the foliage, never toward the eyes. Functional light follows the route: steps, threshold, table surface. Two separate circuits, or two different orientations, allow lighting only one of them depending on the moment.\u003c\/p\u003e\n\n\u003ch3\u003eColour temperature: which white for a terrace?\u003c\/h3\u003e\n\u003cp\u003eAround 2700 to 3000 K, warm white relaxes the space and suits meals. Around 3500 to 4000 K, neutral white renders colours more faithfully and makes a staircase safer. It is better to keep the same white family across the whole area. Indoors, the \u003ca href=\"\/collections\/lampes-a-poser-moderne-pour-salon\"\u003emodern style lamps for the living room\u003c\/a\u003e follow the same logic of consistency.\u003c\/p\u003e\n\n\u003ch2 id=\"branchement\"\u003eHow to wire several lamps on a single electrical supply?\u003c\/h2\u003e\n\u003cp\u003eSeveral lamps can be connected to the same supply if the circuit allows it. They are wired in parallel, each receiving the live and neutral, then the conductor cross-section and circuit protection are checked. Switching off the power and having the diagram approved by an electrician remains the rule.\u003c\/p\u003e\n\n\u003ch3\u003eWiring 3 lamps to 1 switch: which diagram?\u003c\/h3\u003e\n\u003cp\u003eThe supply feeds the switch; the switched live goes back to each light, while the neutral joins them directly. The three points come on together and stay independent if one fails. Each connection is made in an accessible box, suited to outdoors, with the power off.\u003c\/p\u003e\n\n\u003ch3\u003eWiring several lamps in parallel: the checkpoints\u003c\/h3\u003e\n\u003cp\u003eCheck the total load, the conductor cross-section, the dedicated protection and the sealing of the boxes. An outdoor circuit requires residual current protection and neat cable entries. The \u003ca href=\"\/collections\/lampes-a-poser-en-metal-pour-bureau\"\u003emetal lights\u003c\/a\u003e remind us of the importance of a properly connected earth on metal bodies.\u003c\/p\u003e\n\n\u003ch2 id=\"pose-spots\"\u003eHow to install recessed spots in a ceiling or soffit?\u003c\/h2\u003e\n\u003cp\u003eInstallation starts by locating the joists and conduits, then by drilling a pilot hole suited to the housing. The spot is wired with the power off, fixed by spring or screw depending on the model, and adjusted before commissioning. Outdoors, the sealing of the cable entry is checked.\u003c\/p\u003e\n\n\u003ch3\u003eHow to arrange ceiling spots?\u003c\/h3\u003e\n\u003cp\u003eArrange them by zone to be lit, not at a regular rhythm: near the table, along the walkway, toward the facade. Avoid the line of sight when seated and positions that cast a guest's shadow on the table. Marking with tape before drilling validates the positions.\u003c\/p\u003e\n\n\u003ch3\u003eHow to locate the position before drilling?\u003c\/h3\u003e\n\u003cp\u003eLocate joists, conduits and water supplies, then check the available thickness above the ceiling or soffit. Drill a pilot hole smaller than the housing. Indoors, the \u003ca href=\"\/collections\/lampes-a-poser-design-pour-salon\"\u003edesign lamps for the living room\u003c\/a\u003e and the \u003ca href=\"\/collections\/lampes-a-poser-coloris-blanc-pour-salon\"\u003ewhite versions\u003c\/a\u003e are installed using the same locating logic.\u003c\/p\u003e\n\n\u003ch2 id=\"ampoule-e27\"\u003eOutdoor E27 bulb: how to choose the right source?\u003c\/h2\u003e\n\u003cp\u003eAn outdoor E27 bulb must be intended for outdoor use and compatible with the light. Check the socket, the voltage, the colour temperature and the IP rating of the assembly. An integrated LED avoids replacement, while an E27 socket allows the source to be changed if the light accepts it.\u003c\/p\u003e\n\n\u003ch3\u003eE27 socket, GU10 or integrated LED: what to choose?\u003c\/h3\u003e\n\u003cp\u003eThe E27 socket offers a replaceable source and a wide choice of temperatures. The GU10, more compact, suits adjustable spots. The integrated LED simplifies maintenance but makes the light inseparable from its source. Always check compatibility on the model sheet, never by deduction.\u003c\/p\u003e\n\n\u003ch3\u003eOutdoor E27 bulb: checks before buying\u003c\/h3\u003e\n\u003cp\u003eCheck the stated outdoor use, the voltage, the colour temperature and the IP rating of the light that houses it. A watertight bulb in a housing that is not protects nothing. The \u003ca href=\"\/collections\/lampes-a-poser-led-pour-chambre\"\u003eLED lamps for the bedroom\u003c\/a\u003e illustrate the same vigilance about the source.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ccaption\u003eSources and sockets for an outdoor light\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSource\u003c\/th\u003e\n\u003cth\u003eSocket\u003c\/th\u003e\n\u003cth\u003eAdvantage\u003c\/th\u003e\n\u003cth\u003eTo check\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntegrated LED\u003c\/td\u003e\n\u003ctd\u003eNo socket\u003c\/td\u003e\n\u003ctd\u003eNo lamp replacement\u003c\/td\u003e\n\u003ctd\u003eReplacing the light in case of failure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE27 bulb\u003c\/td\u003e\n\u003ctd\u003eE27\u003c\/td\u003e\n\u003ctd\u003eReplaceable source\u003c\/td\u003e\n\u003ctd\u003eOutdoor use and compatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGU10 spot\u003c\/td\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003ctd\u003eCan be adjusted\u003c\/td\u003e\n\u003ctd\u003eFixing and IP rating of the light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote LED module\u003c\/td\u003e\n\u003ctd\u003eDepending on model\u003c\/td\u003e\n\u003ctd\u003eHidden source\u003c\/td\u003e\n\u003ctd\u003eAccess to the driver and connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 id=\"materiaux-style\"\u003eWhich material and style for an outdoor recessed light?\u003c\/h2\u003e\n\u003cp\u003eThe visible material of an outdoor recessed light determines its look and durability: stainless steel, aluminium or brass for the trim, glass for diffusion. Style is chosen according to the facade and the ground, while the discretion of a recessed light depends on its flush finish and its colour.\u003c\/p\u003e\n\n\u003ch3\u003eStainless steel, aluminium or brass: what is the difference?\u003c\/h3\u003e\n\u003cp\u003eStainless steel withstands exposure and stays understated on a stone terrace. Aluminium, lighter, suits slim trims and matt shades. Brass patinates and warms an old facade. Tempered glass protects the source and lets the beam through; its cleanliness determines the sharpness of the rendering.\u003c\/p\u003e\n\n\u003ch3\u003eDiscreet recess or deliberate light signal?\u003c\/h3\u003e\n\u003cp\u003eA flush trim in the colour of the ground blends away: this is the choice for a path. A visible metal ring, or a slightly protruding glass, asserts the signal and accompanies an entrance. For harmony of materials indoors, compare the \u003ca href=\"\/collections\/lampes-a-poser-en-ceramique\"\u003eceramic lamps\u003c\/a\u003e, the \u003ca href=\"\/collections\/lampes-a-poser-en-bois-design\"\u003edesign wood lamps\u003c\/a\u003e and the \u003ca href=\"\/collections\/lampes-a-poser-nordique\"\u003eNordic lamps\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"entretien\"\u003eHow to maintain and make outdoor recessed lighting last?\u003c\/h2\u003e\n\u003cp\u003eAn outdoor recessed light stays legible by cleaning the glass with a soft cloth and removing leaves and soil around the housing. Check the seal, the water drainage and the tightness of the screws. A sealing defect is dealt with before condensation or corrosion appears.\u003c\/p\u003e\n\n\u003ch3\u003eHow to clean a recessed light without damaging it?\u003c\/h3\u003e\n\u003cp\u003eSwitch off the circuit, wipe the glass with clean water and a non-abrasive cloth, without aggressive products on the seal. Remove debris from the cup: water that stagnates eventually forces the seal. Check the tightness of the screws and the condition of the cable gland at the same time.\u003c\/p\u003e\n\n\u003ch3\u003eMistakes to avoid during installation\u003c\/h3\u003e\n\u003cp\u003eInstalling an indoor model outside, drowning the housing in a puddle, aiming the beam toward the neighbour's window, forgetting access above the ceiling: these are the recurring faults. Also plan for replacing the source from the design stage. The complete guide remains \u003ca href=\"\/collections\/luminaire\"\u003eall our lights\u003c\/a\u003e, to consult before ordering.\u003c\/p\u003e\n\n\u003cp\u003eBefore choosing, check the type of recess, the IP rating and the light source. Compare the \u003ca href=\"\/collections\/lampes-a-poser-orientables\"\u003eadjustable models\u003c\/a\u003e and the \u003ca href=\"\/collections\/lampes-a-poser-design-pour-bureau\"\u003edesign lamps for the office\u003c\/a\u003e if your project also involves indoors.\u003c\/p\u003e\u003cp\u003eTo light a facade or a tree, a ground recessed floodlight with a wide beam requires a higher wattage than simple waymarking.\u003c\/p\u003e\n\n\u003cp\u003eThe questions most often asked about installation and wiring, in short answers:\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWiring 3 lamps to 1 switch: how to do it?\u003c\/summary\u003e\n\u003cp\u003eThe three lamps are wired in parallel behind the same switch: the supply feeds the switch, then the switched live goes back to each lamp, while the neutral joins them directly. The circuit must remain protected and accessible. An electrician checks the cross-section, the connections and the load before powering up.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan several lamps be wired in parallel?\u003c\/summary\u003e\n\u003cp\u003eYes, parallel wiring is the usual solution: each light receives the same voltage and remains independent of the others. However, the circuit, the switch and the protection must support the whole. Connections are made with the power off, in accessible boxes suited to outdoors.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eOutdoor wall light for a terrace: how to integrate it?\u003c\/summary\u003e\n\u003cp\u003ePlace it near the entrance, under an awning or along a wall, in a spot that does not dazzle the guests. It complements a ground or ceiling recessed light. Check the fixing to the substrate, the sealing and the cable routing before installation.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow to arrange ceiling spots?\u003c\/summary\u003e\n\u003cp\u003eSpots are arranged according to the zones to be lit, not at a regular rhythm: near the table, along the walkway and toward the facade. Avoid placing a spot in the line of sight and keep the light even. A trial before drilling helps validate the positions.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eOutdoor E27 bulb: how to choose it?\u003c\/summary\u003e\n\u003cp\u003eIt must be compatible with the light and intended for outdoor use. Check the socket, the voltage, the colour temperature and the IP rating of the assembly. An integrated LED avoids replacement, an E27 socket allows the source to be changed if the light accepts it.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"CollectionPage\",\"name\":\"Outdoor recessed lights: buying and installation guide\",\"description\":\"Choosing an outdoor recessed light by location, protection rating and source. Advice for terrace, path and facade.\",\"url\":\"https:\/\/designix.fr\/collections\/lampes-a-poser-d-exterieur-encastrables\",\"isPartOf\":{\"@type\":\"WebSite\",\"name\":\"Designix\",\"url\":\"https:\/\/designix.fr\"},\"speakable\":{\"@type\":\"SpeakableSpecification\",\"cssSelector\":[\"h1\",\"h2\"]}},{\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/designix.fr\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Lighting\",\"item\":\"https:\/\/designix.fr\/collections\/luminaire\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Lamps\",\"item\":\"https:\/\/designix.fr\/collections\/lampes\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"Outdoor recessed lights: buying and installation guide\",\"item\":\"https:\/\/designix.fr\/collections\/lampes-a-poser-d-exterieur-encastrables\"}]},{\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How to wire several lamps on a single electrical supply?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Several lamps can share the same supply if the circuit is designed for the total load. They are wired in parallel, with the live and neutral distributed to each point, then the conductor cross-section and protection are checked. Switching off the power and having the diagram approved by an electrician is essential.\"}},{\"@type\":\"Question\",\"name\":\"Wiring 3 lamps to 1 switch: how to do it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The three lamps are wired in parallel behind the same switch: the supply feeds the switch, then the switched live goes back to each lamp, while the neutral joins them directly. The circuit must remain protected and accessible. An electrician checks the cross-section, the connections and the load before powering up.\"}},{\"@type\":\"Question\",\"name\":\"Can several lamps be wired in parallel?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, parallel wiring is the usual solution for several lamps: each light receives the same voltage and remains independent of the others. However, the circuit, the switch and the protection must support the whole. Connections are made with the power off, in accessible boxes suited to outdoors.\"}},{\"@type\":\"Question\",\"name\":\"Outdoor E27 bulb: how to choose it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"An outdoor E27 bulb must be compatible with the light and intended for outdoor use. Check the socket, the voltage, the colour temperature and the IP rating of the assembly. An integrated LED avoids replacement, while an E27 socket allows the source to be changed if the light accepts it.\"}},{\"@type\":\"Question\",\"name\":\"Outdoor wall light for a terrace: how to integrate it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"An outdoor wall light for a terrace is placed near the entrance, under an awning or along a wall, in a spot that does not dazzle the guests. It complements a ground or ceiling recessed light. Check the fixing to the substrate, the sealing and the cable routing before installation.\"}},{\"@type\":\"Question\",\"name\":\"How to install recessed spots in a ceiling?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Installation requires locating the joists and conduits, drilling a pilot hole suited to the housing, then wiring the spot with the power off. It is held by spring or screw depending on the model. Outdoors, the sealing of the cable entry and the beam adjustment are checked before commissioning.\"}},{\"@type\":\"Question\",\"name\":\"How to arrange ceiling spots?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Spots are arranged according to the zones to be lit, not at a regular rhythm: near the table, along the walkway and toward the facade. Avoid placing a spot in the line of sight and keep the light even. A trial before drilling helps validate the positions.\"}}]}]}\u003c\/script\u003e","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/8598\/2228\/collections\/designix-entete-lampes-a-poser-d-exterieur-encastrables-v1.jpg?v=1793226874","url":"https:\/\/designix-lighting.com\/collections\/outdoor-recessed-lights.oembed","provider":"Designix","version":"1.0","type":"link"}