{"title":"Fluorescent strip light","description":"\u003cp\u003eCheck three things before ordering: the length of the fitting, the cap (T8 in G13 most often, thinner T5) and whether a starter or ballast is present. These three decide whether a neon strip light slides straight into the batten already installed, or whether the wiring needs to be changed to direct 220 V supply.\u003c\/p\u003e\n\n\u003cnav\u003e\n\u003cp\u003eContents\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"#difference-neon-classique-led\"\u003eClassic neon or LED neon\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#remplacer-tube-fluorescent\"\u003eReplacing a fluorescent tube\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#brancher-sans-starter\"\u003eWiring without a starter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#quelle-longueur\"\u003eWhich length to choose\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#ou-installer\"\u003eWhere to install the batten\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#etanche-ip65\"\u003eIP65 waterproof batten\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#neon-clignote\"\u003eThe neon flickers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#culot-support\"\u003eCap and fitting\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\n\n\u003ch2 id=\"difference-neon-classique-led\"\u003eWhat is the difference between classic neon and LED neon?\u003c\/h2\u003e\n\u003cp\u003eA classic neon is a fluorescent tube: a gas under low pressure lights up thanks to an electric arc, mercury is present in the tube, and ignition goes through a starter and a ballast. LED neon replaces the gas with diodes distributed behind a diffuser: immediate ignition, no mercury, stable light with no perceptible flicker.\u003c\/p\u003e\n\u003cp\u003eThe difference plays out at replacement time: a fluorescent tube is changed with its starter, sometimes its ballast, while an LED tube requires checking the compatibility of the fitting. To compare the available formats, browse \u003ca href=\"https:\/\/designix.fr\/collections\/reglettes-led\"\u003ethe range of LED battens\u003c\/a\u003e and, if you are looking for other light fixture shapes for the same room, \u003ca href=\"\/collections\/luminaire\"\u003eall Designix light fixtures\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ccaption\u003eClassic neon or LED neon: what changes\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCriterion\u003c\/th\u003e\n\u003cth\u003eFluorescent tube\u003c\/th\u003e\n\u003cth\u003eLED tube\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight source\u003c\/td\u003e\n\u003ctd\u003efluorescent gas\u003c\/td\u003e\n\u003ctd\u003elight-emitting diodes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStarter\u003c\/td\u003e\n\u003ctd\u003erequired\u003c\/td\u003e\n\u003ctd\u003eremoved on direct-supply models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBallast\u003c\/td\u003e\n\u003ctd\u003emandatory\u003c\/td\u003e\n\u003ctd\u003ebypassed or removed depending on the model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCold ignition\u003c\/td\u003e\n\u003ctd\u003eprogressive\u003c\/td\u003e\n\u003ctd\u003eimmediate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMercury\u003c\/td\u003e\n\u003ctd\u003epresent in the tube\u003c\/td\u003e\n\u003ctd\u003eabsent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplacement\u003c\/td\u003e\n\u003ctd\u003etube and starter, sometimes ballast\u003c\/td\u003e\n\u003ctd\u003ecompatible tube or adapted wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 id=\"remplacer-tube-fluorescent\"\u003eHow to replace a fluorescent tube with an LED tube?\u003c\/h2\u003e\n\u003cp\u003eFirst note the length of the tube and its cap, then open the fitting to see whether it contains a ballast and a starter. These two pieces of information determine the family of LED tube to order, and therefore the time spent on the ladder.\u003c\/p\u003e\n\n\u003ch3\u003eNeon batten without starter: what to remove\u003c\/h3\u003e\n\u003cp\u003eOn a fluorescent setup, the starter housed in the socket or in the fitting is no longer used with a direct-supply tube. It is removed, and the ballast is taken out of circuit: the tube then receives 220 V directly on its pins. The fitting cover is put back once the connection has been checked.\u003c\/p\u003e\n\n\u003ch3\u003eCompatible tube or direct supply: how to decide\u003c\/h3\u003e\n\u003cp\u003eThe compatible tube is fitted without touching the wiring: time is saved, the original fitting is kept. Direct supply removes the ballast, which avoids a wear part, but requires an intervention. If the fitting is old or if the ballast hums, the second solution is the healthier one.\u003c\/p\u003e\n\n\u003ch2 id=\"brancher-sans-starter\"\u003eHow to wire an LED neon without a starter?\u003c\/h2\u003e\n\u003cp\u003eWithout a starter, the direct-supply LED tube receives 220 V on the pins of its sockets: the starter is removed, the ballast bypassed or removed. On a new fitting designed for LED, the connection is already done. Always switch off the power at the circuit breaker before working.\u003c\/p\u003e\n\n\u003ch3\u003eHow to fit an LED neon on an old fitting?\u003c\/h3\u003e\n\u003cp\u003eIdentify the cap and the length, then locate the wires arriving at the sockets. The manufacturer's diagram shows which pin receives the live and which receives the neutral. If the sockets are cracked or the contacts blackened, replace the whole batten rather than patching up a tired fitting.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to check on the socket before reconnecting\u003c\/h3\u003e\n\u003cp\u003eClean contacts, straight pins, no bare wire touching the metal sheet. Check that the connections are tight, reposition the diffuser, then restore the power. Comparing models is easy in \u003ca href=\"\/collections\/reglettes-led-220v\"\u003ethe 220 V battens\u003c\/a\u003e, and for a wall-mounted setup, \u003ca href=\"\/collections\/reglette-murale\"\u003ewall lights and wall battens\u003c\/a\u003e open another path.\u003c\/p\u003e\n\u003cp\u003eUnsure which model to fit? Length and cap first, the collection will be completed as soon as references are available.\u003c\/p\u003e\n\n\u003ch2 id=\"quelle-longueur\"\u003eWhich neon batten length to choose: 50, 120 or 150 cm?\u003c\/h2\u003e\n\u003cp\u003eThe length follows two constraints: the surface to be lit and the space actually available. A batten that is too long overhangs the cabinet, one that is too short leaves shadow areas on the worktop. Measure the existing fitting and the fixing centres before ordering.\u003c\/p\u003e\n\n\u003ch3\u003e50 cm neon batten: for what use?\u003c\/h3\u003e\n\u003cp\u003eA short batten lights a cupboard, a cellar, a shelf or a narrow worktop. It is also the format that slides under a low cabinet without overhanging. In a corridor or a wardrobe, a \u003ca href=\"\/collections\/reglettes-led-a-detecteur-de-mouvement\"\u003ebatten with motion detector\u003c\/a\u003e saves you looking for the switch with your hands full.\u003c\/p\u003e\n\n\u003ch3\u003e120 cm or 150 cm neon batten: measure before ordering\u003c\/h3\u003e\n\u003cp\u003e120 cm covers a kitchen or a garage, 150 cm a workshop or a long corridor. Check the reach of the ceiling fixings and the free space around the tube to turn it a quarter turn. For a cellar without a nearby socket, \u003ca href=\"\/collections\/reglettes-led-rechargeables\"\u003erechargeable battens without a socket\u003c\/a\u003e simplify installation.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ccaption\u003eChoosing the length of your neon batten\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003cth\u003eWhere it fits\u003c\/th\u003e\n\u003cth\u003eWhat it lights\u003c\/th\u003e\n\u003cth\u003eTo check before buying\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e50 cm\u003c\/td\u003e\n\u003ctd\u003ecupboard, cellar, under-cabinet\u003c\/td\u003e\n\u003ctd\u003ea short worktop or a shelf\u003c\/td\u003e\n\u003ctd\u003efixing centres and cap type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60 cm\u003c\/td\u003e\n\u003ctd\u003ecorridor, wardrobe, low cabinet\u003c\/td\u003e\n\u003ctd\u003ea narrow passage\u003c\/td\u003e\n\u003ctd\u003elength of the existing fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120 cm\u003c\/td\u003e\n\u003ctd\u003ekitchen, garage, utility room\u003c\/td\u003e\n\u003ctd\u003ea worktop or a workbench\u003c\/td\u003e\n\u003ctd\u003ecap and supply mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e150 cm\u003c\/td\u003e\n\u003ctd\u003eworkshop, long corridor, barn\u003c\/td\u003e\n\u003ctd\u003ea large floor area\u003c\/td\u003e\n\u003ctd\u003ereach of the ceiling fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 id=\"ou-installer\"\u003eWhere to install a neon batten: kitchen, garage or workshop?\u003c\/h2\u003e\n\u003cp\u003eIn the kitchen, the batten is fixed under the wall units to light the worktop without casting shadows. In the garage and the workshop, it is mounted on the ceiling above the workbench. In a bathroom or utility room, choose a model protected against humidity, outside the bath zone.\u003c\/p\u003e\n\n\u003ch3\u003eKitchen neon batten: under the wall units\u003c\/h3\u003e\n\u003cp\u003eChoose a slim model, long enough to cover the worktop, and avoid placing it directly above a hob: steam and splashes dirty the diffuser. Even light is better than a very bright point that dazzles when seated. Also see \u003ca href=\"\/collections\/reglettes-led-pour-salle-de-bain\"\u003ethe bathroom batten\u003c\/a\u003e if the room is humid.\u003c\/p\u003e\n\n\u003ch3\u003eGarage neon batten: height and fixings\u003c\/h3\u003e\n\u003cp\u003eAbove a workbench, the batten is fixed high enough not to hinder the passage of a plank, low enough to light your hands. Check the strength of the fixings in a slab or a roof structure. For a work room, \u003ca href=\"\/collections\/reglettes-led-pour-atelier\"\u003eregular workshop light\u003c\/a\u003e and \u003ca href=\"\/collections\/reglettes-led-pour-garage\"\u003elighting a garage\u003c\/a\u003e detail the configurations.\u003c\/p\u003e\n\n\u003ch2 id=\"etanche-ip65\"\u003eIP65 waterproof neon batten: for what uses outdoors and in damp rooms?\u003c\/h2\u003e\n\u003cp\u003eThe IP rating describes the protection against dust and water: an IP20 is suitable for a dry room, an IP65 resists dust and water jets. Choose it for a canopy, a damp garage, a utility room or a cellar, never as a decorative argument in a living room.\u003c\/p\u003e\n\n\u003ch3\u003eOutdoor LED neon: under a canopy or shelter\u003c\/h3\u003e\n\u003cp\u003eUnder a canopy, the batten receives lateral splashes even without direct rain: the diffuser gasket and the cable gland make the difference. Compare \u003ca href=\"\/collections\/reglettes-led-d-exterieur\"\u003eour outdoor solutions\u003c\/a\u003e and \u003ca href=\"\/collections\/reglettes-led-d-exterieur-etanches\"\u003ethe waterproof outdoor models\u003c\/a\u003e according to the actual exposure.\u003c\/p\u003e\n\n\u003ch3\u003eDamp room: which protection rating to choose\u003c\/h3\u003e\n\u003cp\u003eIn a bathroom, the batten is mounted above the mirror, outside the safety volumes around the bath. In a utility room or a cellar, \u003ca href=\"\/collections\/reglette-etanche\"\u003ewaterproof battens\u003c\/a\u003e and \u003ca href=\"\/collections\/reglettes-led-ip65\"\u003eIP65 protected models\u003c\/a\u003e cover everyday use. For a room washed down with a hose, \u003ca href=\"\/collections\/reglettes-led-etanches\"\u003elinear lighting resistant to humidity\u003c\/a\u003e remains the safe choice.\u003c\/p\u003e\n\n\u003ch2 id=\"neon-clignote\"\u003eMy neon flickers but does not light up, what should I do?\u003c\/h2\u003e\n\u003cp\u003eA neon that flickers without lighting indicates a tired starter, a tube at the end of its life or a dirty socket contact. Switch off the power, inspect the socket, then replace the tube first and the starter next. On a direct-supply LED tube, a ballast still in place gives the same symptom.\u003c\/p\u003e\n\n\u003ch3\u003eThe tube flickers: starter or tube at the end of its life?\u003c\/h3\u003e\n\u003cp\u003eOn a fluorescent setup, the starter is the cheapest and easiest part to change: try it first if the tube is recent. If the flickering persists with a new tube and a new starter, the ballast is at fault and the fitting deserves to be replaced.\u003c\/p\u003e\n\n\u003ch3\u003eIt lights up then goes out: check the socket contact\u003c\/h3\u003e\n\u003cp\u003eA tube that lights up then goes out after a few seconds often reveals a badly seated pin or an oxidised contact. Switch off the circuit breaker, remove the tube with a quarter turn, clean the contacts and check that the sockets do not turn in the fitting.\u003c\/p\u003e\n\n\u003ch2 id=\"culot-support\"\u003eWhich cap and fitting to plan for an LED neon batten?\u003c\/h2\u003e\n\u003cp\u003eThe cap depends on the fitting already installed: a T8 tube with G13 cap equips most tube battens, the T5 has a thinner cap and a different fitting. Note the length, cap and supply mode before buying. Fixings and connection are supplied with the batten or to be planned depending on the model.\u003c\/p\u003e\n\n\u003ch3\u003eG13 or T5 cap: recognising your fitting\u003c\/h3\u003e\n\u003cp\u003eThe G13 corresponds to the spaced pins of the T8, the most widespread format in garages and kitchens. The T5, thinner, is found in furniture and compact setups. Measure the tube diameter and the pin spacing: these two dimensions are enough to identify the right model. For a setup with detection, \u003ca href=\"\/collections\/reglettes-led-a-detecteur-de-mouvement-220v\"\u003eintegrated mains detection\u003c\/a\u003e connects like a classic batten.\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated batten or tube fitting: what is the difference\u003c\/h3\u003e\n\u003cp\u003eThe integrated batten arrives with its diffuser, its driver and its fixings: you install it and connect it. The tube fitting, on the other hand, takes a separate tube, which makes changing the source easier but requires checking compatibility each time. In both cases, careful marking saves a round trip.\u003c\/p\u003e\n\u003cp\u003eSecure payment, tracked delivery, returns and Designix customer service accompany every order. The choice comes down to three dimensions, not the length of a page: browse \u003ca href=\"\/collections\/reglettes-led\"\u003ethe LED battens\u003c\/a\u003e or \u003ca href=\"\/collections\/luminaire\"\u003ethe complete light fixture catalogue\u003c\/a\u003e to find the format that matches your fitting.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow to wire a neon tube?\u003c\/summary\u003e\n\u003cp\u003eSwitch off the power at the circuit breaker, then present the tube aligned with the sockets and turn it a quarter turn until it locks. On a fluorescent setup, the starter is in place before restoring the power. Check that it lights before closing the diffuser.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it possible to fit an LED neon on a standard fitting?\u003c\/summary\u003e\n\u003cp\u003eYes, if the length and cap match, the T8 in G13 being the most widespread. The point to decide remains the supply: a tube compatible with the existing ballast, or a direct-supply tube that requires modifying the wiring. This check is done before buying.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow to fit an LED neon on an old fitting?\u003c\/summary\u003e\n\u003cp\u003eIdentify the cap and the length of the fitting, then the type of tube accepted. On a direct-supply model, the starter is removed and the ballast bypassed. If the fitting is old, check the condition of the sockets and contacts before restoring the power.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eMy neon flickers but does not light up. What should I do?\u003c\/summary\u003e\n\u003cp\u003eSwitch off the power, then check the socket and its contacts, often dirty or loose. Then replace the tube, then the starter if the setup has one. On a direct-supply LED tube, a ballast still active produces the same flickering and must be removed from the circuit.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhere to find a neon tube?\u003c\/summary\u003e\n\u003cp\u003eIn a DIY store, from an electrical equipment distributor or online from a lighting specialist. Identifying it beforehand matters more than where you buy: length, cap and supply mode determine the tube compatible with your fitting.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"CollectionPage\",\"name\":\"Neon batten: choosing and installing an LED neon\",\"description\":\"Neon batten: understand the difference between classic neon and LED neon, choose the right cap, wire without a starter and install an IP65 waterproof tube.\",\"url\":\"https:\/\/designix.fr\/collections\/reglette-neon\",\"isPartOf\":{\"@type\":\"WebSite\",\"name\":\"Designix\",\"url\":\"https:\/\/designix.fr\"},\"speakable\":{\"@type\":\"SpeakableSpecification\",\"cssSelector\":[\"h1\",\"h2\"]}},{\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/designix.fr\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Light fixture\",\"item\":\"https:\/\/designix.fr\/collections\/luminaire\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Batten\",\"item\":\"https:\/\/designix.fr\/collections\/reglette\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"Neon batten: choosing and installing an LED neon\",\"item\":\"https:\/\/designix.fr\/collections\/reglette-neon\"}]},{\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How to wire a neon tube?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Switch off the power at the circuit breaker, then fit the tube by presenting it aligned with the sockets and turning it a quarter turn until it locks. On a fluorescent setup, the starter is in place before restoring the power. Then check that it lights before closing the diffuser.\"}},{\"@type\":\"Question\",\"name\":\"Is it possible to replace a neon tube with an LED tube?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, provided the length and cap of the fitting are respected. Two families exist: LED tubes compatible with the ballast in place and direct-supply tubes, which require removing the starter and ballast. The wiring is checked before ordering, and the work is done with the power off.\"}},{\"@type\":\"Question\",\"name\":\"How to fit an LED neon on an old fitting?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"First identify the cap and the length of the fitting, then the type of LED tube accepted. On a direct-supply model, the starter is removed and the ballast bypassed. If the fitting is old, check the condition of the sockets and contacts before restoring the power at the circuit breaker.\"}},{\"@type\":\"Question\",\"name\":\"How to wire an LED neon without a starter?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The direct-supply LED tube receives 220 V on the pins of its sockets: the starter is no longer used and the ballast is taken out of circuit. Connect the live and neutral according to the manufacturer's diagram, switch off the power before working and check that the connections are tight before restoring the power.\"}},{\"@type\":\"Question\",\"name\":\"My neon flickers but does not light up. What should I do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Switch off the power, then check the socket and its contacts, often dirty or loose. Then replace the tube, then the starter if the setup has one. On a direct-supply LED tube, the presence of a ballast still active produces the same flickering: it must be removed from the circuit.\"}},{\"@type\":\"Question\",\"name\":\"Is it possible to fit an LED neon on a standard fitting?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, an LED tube can be fitted on a standard fitting if the length and cap match, the T8 in G13 being the most widespread. The point to decide remains the supply: a tube compatible with the existing ballast, or a direct-supply tube requiring the wiring to be modified. Check before buying.\"}},{\"@type\":\"Question\",\"name\":\"Where to find a neon tube?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A neon tube can be found in a DIY store, from an electrical equipment distributor or online from a lighting specialist. Identifying it beforehand matters more than where you buy: length, cap and supply mode determine the tube compatible with your fitting.\"}},{\"@type\":\"Question\",\"name\":\"Which neon batten to choose for a kitchen?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For a kitchen, choose a slim batten fixed under the wall units, long enough to cover the worktop and to diffuse even light without dazzling. Favour a model protected against steam and splashes, and avoid placing the device directly above a hob.\"}}]}]}\u003c\/script\u003e","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/8598\/2228\/collections\/designix-entete-reglette-neon-v1.jpg?v=1793039994","url":"https:\/\/designix-lighting.com\/collections\/neon-strip-light.oembed","provider":"Designix","version":"1.0","type":"link"}