{"title":"LED pool bulbs","description":"\u003cp\u003eYou choose a LED pool light bulb by starting from the old one: same format, same base type, same voltage. Note these three details on the removed bulb or in the spotlight's instructions; the colour temperature and the rendering are decided afterwards.\u003c\/p\u003e\n\n\u003cnav\u003e\n\u003ch2\u003eContents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"#choisir\"\u003eWhich LED pool light bulb should you choose for your spotlight?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#puissance\"\u003eWhat wattage of pool light bulb do you need?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#tension\"\u003e12 V or 230 V: how do you know at which voltage your pool is lit?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#couleur\"\u003eWhat light for the pool: warm white, cool white or colour?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#changer\"\u003eHow do you change the bulb in a pool spotlight?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#accorder\"\u003eHow do you match the pool light with the terrace and the house?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#trancher\"\u003eHow do you decide between two LED pool light bulbs of the same format?\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\n\n\u003ch2 id=\"choisir\"\u003eWhich LED pool light bulb should you choose for your spotlight?\u003c\/h2\u003e\n\u003cp\u003eFirst note the format, the base and the voltage of the bulb in place: what it replaces defines the purchase. Once these three points are noted, only the light remains to be chosen, warmer for evenings, crisper for swimming, and the pool tiles become readable again as soon as night falls.\u003c\/p\u003e\n\n\u003ch3\u003ePool lamp bulb: note the format and the socket\u003c\/h3\u003e\n\u003cp\u003eRemove the old bulb with the power off and photograph it from two angles, face and base. A screw base of the E27 type, a bayonet, a GU10 socket or a PAR56 block do not take up the same volume in the spotlight niche. Note the diameter of the glass and the available depth: two references can look alike to the eye and not fit in the same way. This photo is also useful to customer service if any doubt remains about compatibility. To compare base families, browse \u003ca href=\"https:\/\/designix.fr\/collections\/ampoules-led-e27\"\u003eE27 base bulbs\u003c\/a\u003e and \u003ca href=\"\/collections\/ampoules-culot-e27\"\u003eE27 screw base\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWaterproof LED pool spotlight or bulb alone: two different projects\u003c\/h3\u003e\n\u003cp\u003eReplacing the bulb in an existing spotlight is a simple job: the fitting, the cable and the power supply are kept. Installing a \u003ca href=\"\/collections\/ampoules-d-exterieur-led\"\u003ecomplete underwater spotlight\u003c\/a\u003e requires a suitable niche, a cable route and sometimes work in the technical room. If you are renovating the pool, the second option should be considered before the first. If you only want to light the pool again this weekend, stick with the bulb.\u003c\/p\u003e\n\u003cp\u003eUnsure between two product families? The \u003ca href=\"\/collections\/luminaire\"\u003eDesignix lighting department\u003c\/a\u003e groups the fittings and their light sources, to compare before ordering.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ccaption\u003eThe information to note before ordering a pool light bulb\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eItem to note\u003c\/th\u003e\n\u003cth\u003eWhere to find it\u003c\/th\u003e\n\u003cth\u003eWhy it is decisive\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFormat and base type\u003c\/td\u003e\n\u003ctd\u003eOld bulb, spotlight instructions\u003c\/td\u003e\n\u003ctd\u003eA bulb that does not screw in or fit is useless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003eTransformer, spotlight plate\u003c\/td\u003e\n\u003ctd\u003eA bulb designed for the other voltage will not light correctly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIngress protection rating\u003c\/td\u003e\n\u003ctd\u003eSpotlight label, instructions\u003c\/td\u003e\n\u003ctd\u003eUnderwater use requires a suitable level of sealing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent colour temperature\u003c\/td\u003e\n\u003ctd\u003ePackaging of the old bulb\u003c\/td\u003e\n\u003ctd\u003eTo recover the same atmosphere in the pool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing dimensions\u003c\/td\u003e\n\u003ctd\u003eSpotlight niche, glass removed\u003c\/td\u003e\n\u003ctd\u003eA PAR56 format and a GU10 spotlight do not take up the same volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 id=\"puissance\"\u003eWhat wattage of pool light bulb do you need?\u003c\/h2\u003e\n\u003cp\u003eRead the value written on the original bulb and on the spotlight plate, then stay within that range. An LED with equivalent output uses fewer watts than the halogen it replaces. The watt describes electrical consumption, the lumen describes the amount of light actually sent into the water.\u003c\/p\u003e\n\n\u003ch3\u003ePool lighting bulb: compare at equal power\u003c\/h3\u003e\n\u003cp\u003eTwo references cannot be compared on wattage alone. Look at the output in lumens, the voltage and the base, then check what the spotlight accepts. A spotlight designed for a bulb of a given power will not like a source that exceeds the limit stated by its manufacturer. If the old bulb has faded, the instructions or the spotlight reference will settle it. The rest of \u003ca href=\"\/collections\/ampoules-led-1\"\u003ethe LED bulb range\u003c\/a\u003e follows the same logic: compatibility first, rendering second.\u003c\/p\u003e\n\n\u003ch3\u003eWhat happens if you use an LED bulb that is too powerful?\u003c\/h3\u003e\n\u003cp\u003eThe spotlight heats up more, and the seal and the glass are the first to age. The light can also dazzle swimmers and flatten the contrasts underwater: steps and the bottom are less easy to make out. The value stated by the fitting manufacturer remains the reference not to exceed, without exception.\u003c\/p\u003e\n\n\u003ch2 id=\"tension\"\u003e12 V or 230 V: how do you know at which voltage your pool is lit?\u003c\/h2\u003e\n\u003cp\u003eLook for the transformer in the technical room or read the spotlight's rating plate: a pool light bulb is designed for a single voltage. Either 12 V through a transformer, or 230 V connected directly. Always switch off the power at the consumer unit before removing anything.\u003c\/p\u003e\n\n\u003ch3\u003eLED pool lamps: locating the transformer\u003c\/h3\u003e\n\u003cp\u003eA box near the technical room, often with cable marking and instructions pinned next to it, is the sign of a low-voltage installation. The absence of a transformer and a cable running directly to the consumer unit point to 230 V. If in doubt, the installation instructions settle it. \u003ca href=\"\/collections\/ampoules-led-12v\"\u003e12 volt LED bulbs\u003c\/a\u003e and \u003ca href=\"\/collections\/ampoules-led-220v\"\u003ebulbs designed for 230 V\u003c\/a\u003e are not interchangeable.\u003c\/p\u003e\n\n\u003ch3\u003e12 V or 230 V pool light bulb: never mix them up\u003c\/h3\u003e\n\u003cp\u003eA reference for a different voltage will not light correctly, and may deteriorate. It is not a question of quality but of design: the internal driver is calculated for a precise range. Also check that the transformer delivers a voltage suited to the new bulb before refitting the glass. If the installation is ageing, the \u003ca href=\"\/collections\/ampoules-12v\"\u003elow-voltage circuit\u003c\/a\u003e deserves a check.\u003c\/p\u003e\n\n\u003ch2 id=\"couleur\"\u003eWhat light for the pool: warm white, cool white or colour?\u003c\/h2\u003e\n\u003cp\u003eChoose on the rendering, not on the spec sheet: a warm white around 3000 K makes the pool welcoming in the evening and matches the surroundings. A cooler white, around 4000 to 6500 K, gives clearer water and suits swimming pools. Colour models serve the atmosphere of an evening, not everyday light.\u003c\/p\u003e\n\n\u003ch3\u003e3000 K, 4000 K, 6500 K: what it changes underwater\u003c\/h3\u003e\n\u003cp\u003eThe lower the temperature, the more golden the water looks and the warmer the tiles feel. The higher it goes, the more the blue of the pool stands out and the more marked the contrasts are, which helps to read the steps of a deep pool. The marker to remember: stay consistent from one source to another to avoid a patch of different light on the same wall. For a very soft tint, look at \u003ca href=\"\/collections\/ampoules-2700k\"\u003e2700 K warm white light\u003c\/a\u003e; for a more decisive rendering, \u003ca href=\"\/collections\/ampoules-3000k\"\u003e3000 K bulbs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eMulticolour LED spotlight: for what use?\u003c\/h3\u003e\n\u003cp\u003eA colour model is chosen for an evening, a birthday, a one-off staging. In everyday lighting, colour tires the eye and makes the pool harder to read. Above all, check that the spotlight accepts dimming: \u003ca href=\"\/collections\/ampoules-led-a-variateur\"\u003edimmable bulbs\u003c\/a\u003e do not fit every installation, and a 12 V setup requires a compatible transformer. \u003ca href=\"\/collections\/ampoules-coloris-blanc\"\u003eWhite bulbs\u003c\/a\u003e remain the safe choice for regular use.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ccaption\u003eWhich light rendering for which use of the pool\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eRendering\u003c\/th\u003e\n\u003cth\u003eColour temperature\u003c\/th\u003e\n\u003cth\u003eRecommended use\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarm white\u003c\/td\u003e\n\u003ctd\u003e2700 to 3000 K\u003c\/td\u003e\n\u003ctd\u003eEvening swimming, matching the terrace and the pool house\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeutral white\u003c\/td\u003e\n\u003ctd\u003e4000 K\u003c\/td\u003e\n\u003ctd\u003eVersatile lighting, clear reading of the tiles and coping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCool white\u003c\/td\u003e\n\u003ctd\u003e6000 to 6500 K\u003c\/td\u003e\n\u003ctd\u003eVery high-contrast rendering, swimming pool or deep pool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eDepending on the model\u003c\/td\u003e\n\u003ctd\u003eEvening atmosphere, to be reserved for times when no one is swimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 id=\"changer\"\u003eHow do you change the bulb in a pool spotlight?\u003c\/h2\u003e\n\u003cp\u003eSwitch off the power at the consumer unit, open the spotlight following the instructions, remove the bulb and replace it with a reference of the same format, same base and same voltage. Clean the seal, refit the glass, check the sealing before switching the power back on. A marked seal is replaced, not reused.\u003c\/p\u003e\n\n\u003ch3\u003eSwitch off the power and open the spotlight in order\u003c\/h3\u003e\n\u003cp\u003eSwitch off the dedicated circuit breaker, not just the switch, and wait for it to stop completely. Unscrew the casing or the bezel depending on the model, then hold the glass with one hand while the bulb comes free: the glass is not always attached to the casing. Remove the bulb with the power off, without forcing the base. A stubborn spotlight is reopened with the instructions in front of you, not with a screwdriver.\u003c\/p\u003e\n\n\u003ch3\u003eSeal, glass and reassembly: restoring the sealing\u003c\/h3\u003e\n\u003cp\u003eClean the seal housing, remove limescale deposits and dry before reassembling. A compressed or cracked seal is replaced, otherwise water comes back through the glass. Screw back without forcing, in a cross pattern, to spread the pressure. Then switch the power on and watch the first few minutes. In routine maintenance, rinse the glass with clean water and check the seal each season. For a spotlight recessed into the coping or the pool house, see \u003ca href=\"\/collections\/ampoules-led-gu5\"\u003echanging a recessed LED spotlight\u003c\/a\u003e. Switch off the power at the circuit breaker, remove the fixing spring and note the GU10 base. Then refit the assembly without forcing.\u003c\/p\u003e\n\n\u003ch2 id=\"accorder\"\u003eHow do you match the pool light with the terrace and the house?\u003c\/h2\u003e\n\u003cp\u003eKeep the same colour temperature between the pool, the terrace and the interior: the light stays consistent from one space to another and the evening does not create a break. A warm white around 3000 K works as well on the surroundings as inside the house.\u003c\/p\u003e\n\n\u003ch3\u003eOutdoor bulbs for the surroundings and the pool house\u003c\/h3\u003e\n\u003cp\u003eThe pool lights, the surroundings guide. Sources in the same tint on the path, the terrace and the pool house avoid the contrast effect between golden water and white steps. Plan low, discreet lighting on the path, and reserve the most powerful source for the water. For the showers and the pool house, \u003ca href=\"\/collections\/ampoules-d-exterieur-led\"\u003eoutdoor bulbs for the surroundings\u003c\/a\u003e cover this need.\u003c\/p\u003e\n\n\u003ch3\u003eExtending the same atmosphere indoors\u003c\/h3\u003e\n\u003cp\u003eTake up the temperature chosen outside for the living room and the kitchen: the eye moves from the pool to the lounge without a change of tone. This is the basis of a successful \u003ca href=\"\/collections\/ampoules-pour-cuisine\"\u003emodern kitchen decor\u003c\/a\u003e, where light highlights materials without yellowing them. This temperature consistency matters as much in kitchen decoration as on the terrace. For the living room, a \u003ca href=\"\/collections\/ampoules-pour-salon\"\u003eLED chandelier for the lounge\u003c\/a\u003e completes the set, and the \u003ca href=\"\/collections\/luminaire\"\u003elighting catalogue\u003c\/a\u003e lets you check the available tints.\u003c\/p\u003e\n\n\u003ch2 id=\"trancher\"\u003eHow do you decide between two LED pool light bulbs of the same format?\u003c\/h2\u003e\n\u003cp\u003eWith the same format and voltage, compare the stated ingress protection rating, the quality of the base and the way the bulb is assembled. An affordable model suits a one-off replacement; a more carefully made model is justified for a pool used all year round. Check compatibility before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat distinguishes an affordable model from a durable one\u003c\/h3\u003e\n\u003cp\u003eThe crimping of the base, the hold of the glass seal and the stated ingress protection rating make the difference in underwater use. A heated pool used all year round puts more demand on the source than a pool open in summer. Also look at the availability of the same reference during the year: recovering the same rendering on a second replacement avoids a difference in tint on the wall. Browse \u003ca href=\"\/collections\/ampoules\"\u003eour selection of bulbs\u003c\/a\u003e to compare the families.\u003c\/p\u003e\n\n\u003ch3\u003eChecking compatibility before ordering\u003c\/h3\u003e\n\u003cp\u003eA photo of the old bulb, the spotlight reference and the stated voltage are enough for customer service to confirm the model. Do not order on an impression of similarity: a slightly different diameter blocks the refitting of the glass. The \u003ca href=\"\/collections\/ampoules-led-220v\"\u003e230 V circuit\u003c\/a\u003e and the \u003ca href=\"\/collections\/ampoules-led-12v\"\u003elow-voltage setup\u003c\/a\u003e remain the only two cases to identify.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSecure payment on the Designix shop.\u003c\/li\u003e\n\u003cli\u003eTracked delivery, parcel to be received and checked.\u003c\/li\u003e\n\u003cli\u003eReturns possible according to the shop's conditions.\u003c\/li\u003e\n\u003cli\u003eDesignix customer service available to confirm a format.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnsure about the reference to choose? Send the photo of your removed bulb via \u003ca href=\"\/collections\/ampoules-pour-bureau\"\u003ecustomer service\u003c\/a\u003e, or start again from \u003ca href=\"\/collections\/luminaire\"\u003eall the light fittings\u003c\/a\u003e to locate your spotlight.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eLED pool spotlight bulb: how do you know the required format?\u003c\/summary\u003e\n\u003cp\u003eRemove the spotlight with the power off and look at the old bulb: shape, diameter and base type (screw such as E27, bayonet, or GU10 spotlight) determine compatibility. The spotlight instructions also state the accepted format and voltage. A photo of the bulb and its housing is enough for customer service.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan a pool light bulb be replaced by a waterproof LED spotlight?\u003c\/summary\u003e\n\u003cp\u003eIt all depends on the niche: a waterproof spotlight is installed in a housing designed for it, with its cable route and its power supply. If your spotlight takes a screw-in bulb, you replace the bulb, not the fitting. Check the compatibility of the housing before opening the spotlight.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eDoes an LED pool light bulb work on 12 V and on 230 V?\u003c\/summary\u003e\n\u003cp\u003eNo, each bulb is designed for a single voltage. A 12 V installation goes through a transformer, a 230 V setup is connected directly to the mains. Identify your installation before buying: the chosen reference must match the voltage that supplies the spotlight.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhich light colour should you choose for a pool?\u003c\/summary\u003e\n\u003cp\u003eA warm white around 3000 K gives a welcoming pool in the evening and matches the surroundings. A cooler white, around 4000 to 6500 K, makes the water clearer and suits swimming pools. Colour models serve the atmosphere, not everyday lighting.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat happens if you use an LED bulb that is too powerful?\u003c\/summary\u003e\n\u003cp\u003eThe spotlight heats up more and its seal or glass may age faster. The light can also dazzle swimmers and flatten the contrasts of the pool. The value stated by the spotlight manufacturer remains the reference not to exceed.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"CollectionPage\",\"name\":\"LED pool lights: choosing the bulb for your spotlight\",\"description\":\"LED pool lights: how to choose the right format, voltage and colour temperature to replace the bulb in your underwater spotlight.\",\"url\":\"https:\/\/designix.fr\/collections\/ampoules-led-pour-piscine\",\"isPartOf\":{\"@type\":\"WebSite\",\"name\":\"Designix\",\"url\":\"https:\/\/designix.fr\"},\"speakable\":{\"@type\":\"SpeakableSpecification\",\"cssSelector\":[\"h1\",\"h2\"]}},{\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/designix.fr\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Lighting\",\"item\":\"https:\/\/designix.fr\/collections\/luminaire\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Bulbs\",\"item\":\"https:\/\/designix.fr\/collections\/ampoules\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"LED pool lights: choosing the bulb for your spotlight\",\"item\":\"https:\/\/designix.fr\/collections\/ampoules-led-pour-piscine\"}]},{\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What wattage of pool light bulb do you need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The power is chosen in relation to the original bulb and the value stated by the spotlight: stay within that range. An LED with equivalent output uses fewer watts than the halogen it replaces. It is the luminous output, expressed in lumens, that describes the amount of light.\"}},{\"@type\":\"Question\",\"name\":\"What happens if you use an LED bulb that is too powerful?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The spotlight heats up more and its seal or glass may age faster. The light can also dazzle swimmers and flatten the contrasts of the pool. The value stated by the spotlight manufacturer remains the reference not to exceed.\"}},{\"@type\":\"Question\",\"name\":\"LED pool spotlight bulb: how do you know the required format?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Remove the spotlight with the power off and look at the old bulb: shape, diameter and base type (screw such as E27, bayonet, or GU10 spotlight) determine compatibility. The spotlight instructions also state the accepted format and voltage. A photo of the bulb and its housing is enough for customer service.\"}},{\"@type\":\"Question\",\"name\":\"Can a pool light bulb be replaced by a waterproof LED spotlight?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It all depends on the niche: a waterproof spotlight is installed in a housing designed for it, with its cable route and its power supply. If your spotlight takes a screw-in bulb, you replace the bulb, not the fitting. Check the compatibility of the housing before opening the spotlight.\"}},{\"@type\":\"Question\",\"name\":\"Does an LED pool light bulb work on 12 V and on 230 V?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, each bulb is designed for a single voltage. A 12 V installation goes through a transformer, a 230 V setup is connected directly to the mains. Identify your installation before buying: the chosen reference must match the voltage that supplies the spotlight.\"}},{\"@type\":\"Question\",\"name\":\"How do you change the bulb in a pool spotlight?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Switch off the power at the consumer unit, open the spotlight following the instructions, remove the old bulb and replace it with a reference of the same format and same voltage. Clean the seal, refit the glass and check the sealing before switching the power back on. A damaged seal is replaced.\"}},{\"@type\":\"Question\",\"name\":\"Which light colour should you choose for a pool?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A warm white around 3000 K gives a welcoming pool in the evening and matches the surroundings. A cooler white, around 4000 to 6500 K, makes the water clearer and suits swimming pools. Colour models serve the atmosphere, not everyday lighting.\"}}]}]}\u003c\/script\u003e","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/8598\/2228\/collections\/designix-entete-ampoules-led-pour-piscine-v1.jpg?v=1793453133","url":"https:\/\/designix-lighting.com\/collections\/led-pool-lights-1.oembed","provider":"Designix","version":"1.0","type":"link"}