{"title":"IP65 light bulbs","description":"\u003cp\u003eThe collection includes 54 IP65 bulbs. The 6 keeps dust out, the 5 withstands water jets. They hold up on a facade, on an uncovered terrace, near a shower or in a damp garage, where an ordinary bulb oxidises within a few months.\u003c\/p\u003e\n\n\u003ch2 id=\"ip65-definition\"\u003eWhat is IP65?\u003c\/h2\u003e\n\u003cp\u003eIP65 is a two-digit protection rating. The 6 indicates a housing completely sealed against dust, the 5 resistance to water jets sprayed from all directions. An IP65 bulb withstands rain and jet cleaning, but must never be immersed.\u003c\/p\u003e\n\n\u003ch3\u003eIP65 LED bulb: what it changes day to day\u003c\/h3\u003e\n\u003cp\u003eThe difference shows over time. An ordinary bulb placed under a canopy picks up moisture, blackens at the base and flickers after a season. An IP65 LED bulb keeps a stable output on a terrace swept by rain, in a bathroom where the shower steams up, or in a garage where a wet car is parked. Cleaning follows: a quick jet on the closed fitting, without removing the socket.\u003c\/p\u003e\n\n\u003ch3\u003eIP23 bulbs: what are we talking about?\u003c\/h3\u003e\n\u003cp\u003eIP23 protects against solid objects larger than 12.5 mm and oblique rain, not jets. It is a rating for sheltered rooms: a corridor, a pantry, a deep canopy where water never reaches the fitting. Fitting an IP23 bulb on an exposed facade is like letting water in through the top of the socket. For real exposure, compare with the \u003ca href=\"https:\/\/designix.fr\/collections\/ampoules-led-220v\"\u003e220V LED bulbs\u003c\/a\u003e designed for outdoor use.\u003c\/p\u003e\n\n\u003ch2 id=\"ip44-vs-ip65\"\u003eWhat is the difference between IP44 and IP65?\u003c\/h2\u003e\n\u003cp\u003eIP44 protects against solid objects larger than 1 mm and water splashes, but not jets. IP65 adds total dust tightness and resistance to water jets. In a bathroom, IP44 is enough away from water points; near the shower or in exposed outdoor areas, IP65 is the right level.\u003c\/p\u003e\n\n\u003ch3\u003eIP44 or IP65 for the bathroom?\u003c\/h3\u003e\n\u003cp\u003eIt all depends on the distance from water. More than a metre from the bath, an IP44 mirror wall light does the job. Above the shower, on a side wall of the bath, you need a rating that withstands direct splashes, so IP65. The fitting matters as much as the bulb: an upward-facing socket will retain water even with a well-protected bulb.\u003c\/p\u003e\n\n\u003ch3\u003eIP65, IP66, IP68: how far does sealing go?\u003c\/h3\u003e\n\u003cp\u003eThe two digits rise together. IP66 adds resistance to powerful jets, such as a pressure washer or sea spray. IP68 goes as far as continuous immersion under conditions set by the manufacturer, which concerns pool fittings. IP68 is therefore the most sealed of the three, IP65 remains the standard level for non-immersed outdoor use.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat each rating protects against\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eRating\u003c\/th\u003e\n\u003cth\u003eDust\u003c\/th\u003e\n\u003cth\u003eWater\u003c\/th\u003e\n\u003cth\u003eTypical use\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP23\u003c\/td\u003e\n\u003ctd\u003eSolid objects over 12.5 mm\u003c\/td\u003e\n\u003ctd\u003eOblique rain, no jets\u003c\/td\u003e\n\u003ctd\u003eCovered shelter, low-humidity room\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP44\u003c\/td\u003e\n\u003ctd\u003eSolid objects over 1 mm\u003c\/td\u003e\n\u003ctd\u003eSplashes from all directions\u003c\/td\u003e\n\u003ctd\u003eBathroom away from water points, canopy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003ctd\u003eDust-tight\u003c\/td\u003e\n\u003ctd\u003eWater jets from all directions\u003c\/td\u003e\n\u003ctd\u003eFacade, terrace, damp garage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP66\u003c\/td\u003e\n\u003ctd\u003eDust-tight\u003c\/td\u003e\n\u003ctd\u003ePowerful jets, sea\u003c\/td\u003e\n\u003ctd\u003eSeaside, jet cleaning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP68\u003c\/td\u003e\n\u003ctd\u003eDust-tight\u003c\/td\u003e\n\u003ctd\u003eContinuous immersion\u003c\/td\u003e\n\u003ctd\u003eImmersed fitting, pool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 id=\"ip-exterieur\"\u003eWhich IP for outdoor lighting?\u003c\/h2\u003e\n\u003cp\u003eOutdoors, aim for at least IP44 under a sheltered canopy, and IP65 as soon as rain or a pressure washer jet can reach the bulb: facade, uncovered terrace, low wall, gate. IP65 covers driving rain without immersion. Beyond that, only a seaside location justifies IP66.\u003c\/p\u003e\n\n\u003ch3\u003eIP65 outdoor bulb: terrace, facade or garden?\u003c\/h3\u003e\n\u003cp\u003eOn a covered terrace, water arrives through wind and condensation: IP65 secures the installation without technical extra cost. On a facade, under a porch or against a low wall, it is the minimum. In the garden, on a post or a low lamp post, the bulb takes the full force of rain and sometimes the spray from watering. A closed globe model in \u003ca href=\"\/collections\/ampoules-en-verre\"\u003eglass bulbs\u003c\/a\u003e protects the source better than an exposed bulb.\u003c\/p\u003e\n\n\u003ch3\u003eUnder a canopy or in the open air: which rating to choose?\u003c\/h3\u003e\n\u003cp\u003eUnder a deep canopy, the bulb stays dry: IP44 is enough and leaves more choice of shapes. As soon as the canopy is short or lateral, driven rain reaches the fitting: move to IP65. The useful rule is simple: if you can imagine water running down the socket, choose IP65.\u003c\/p\u003e\n\n\u003ch2 id=\"ip65-salle-de-bain\"\u003eIP65 bathroom bulb: which one to choose?\u003c\/h2\u003e\n\u003cp\u003eIn a bathroom, the bulb is chosen according to its distance from the shower or bath: closest to water points, an IP65 model protects against direct splashes; further away, IP44 is enough. An E27 or GU10 LED base, in warm white, keeps the room gentle when you wake up.\u003c\/p\u003e\n\n\u003ch3\u003eIP65 bathroom bulb: near the shower or the mirror?\u003c\/h3\u003e\n\u003cp\u003eAbove the mirror, you want light that illuminates the face without casting shadows: a diffusing model, in IP44 if the mirror is at a distance from the bath. In the shower zone, the bulb takes splashes every time: IP65 mandatory, and socket facing down. For a very damp room without extraction, the high rating compensates for insufficient ventilation.\u003c\/p\u003e\n\n\u003ch3\u003eWarm white or neutral light in the bathroom?\u003c\/h3\u003e\n\u003cp\u003eWarm white, around 2700 K to 3000 K, softens the tiling and remains bearable in the middle of the night. A neutral white around 4000 K renders skin tones more accurately in front of the mirror and suits rooms without windows. The choice is made before the power, otherwise you are just lighting a colour you do not like more strongly. See the \u003ca href=\"\/collections\/ampoules-2700k\"\u003e2700K bulbs\u003c\/a\u003e and the \u003ca href=\"\/collections\/ampoules-3000k\"\u003e3000K bulbs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"ip65-culots\"\u003eIP65 bulb E27, E14 or GU10: which base to choose?\u003c\/h2\u003e\n\u003cp\u003eThe base depends on the fitting, not on the IP rating: E27 for pendants, ceiling lights and wall lights, E14 for small volumes and table lamps, GU10 for recessed or directional spotlights. Check the base marked on the socket before ordering an IP65 bulb. The collection includes 54 IP65 bulbs; PAR30 and PAR38 reflector shapes are not listed.\u003c\/p\u003e\n\n\u003ch3\u003eIP65 E27 bulb: pendants, ceiling lights and wall lights\u003c\/h3\u003e\n\u003cp\u003eThe large screw base fits most terrace and entrance fittings. It accepts bulbs of classic shape, globe or bulb, and can be changed without tools. On an outdoor pendant, keep an eye on the globe diameter: a bulb that is too wide touches the diffuser. The range continues with the \u003ca href=\"\/collections\/ampoules-culot-e27\"\u003eE27 base bulbs\u003c\/a\u003e and the \u003ca href=\"\/collections\/ampoules-led-e27\"\u003eE27 LED bulbs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eIP65 GU10 bulb: outdoor spotlights and recesses\u003c\/h3\u003e\n\u003cp\u003ePin-base spotlights clip into a GU10 socket, often directional. They suit terrace recesses under a canopy, bathroom ceilings and low-wall rails. The point to check is the recess depth and the reflector shape, because not all spotlights fit into all housings. The \u003ca href=\"\/collections\/ampoules-gu10\"\u003eGU10 spotlights\u003c\/a\u003e cover this need.\u003c\/p\u003e\n\n\u003ch3\u003eE14 bulbs: small volumes and table lamps\u003c\/h3\u003e\n\u003cp\u003eThe small screw base is used for mirror wall lights, bedside lamps and compact fittings. In damp areas, the choice is more limited than in E27, so check the rating before the shape. For a corridor or a bedroom adjoining the bathroom, the \u003ca href=\"\/collections\/ampoules-e14\"\u003eE14 bulbs\u003c\/a\u003e are often enough.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhich base for which fitting\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003cth\u003eTypical fitting\u003c\/th\u003e\n\u003cth\u003eWhere to find it\u003c\/th\u003e\n\u003cth\u003eTo check\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eE27\u003c\/td\u003e\n\u003ctd\u003ePendant, ceiling light, wall light\u003c\/td\u003e\n\u003ctd\u003eEntrance, covered terrace, living room\u003c\/td\u003e\n\u003ctd\u003eSocket diameter and clearance under the diffuser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE14\u003c\/td\u003e\n\u003ctd\u003eSmall fitting, table lamp\u003c\/td\u003e\n\u003ctd\u003eBedroom, bathroom, corridor\u003c\/td\u003e\n\u003ctd\u003eMaximum power marked on the socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGU10\u003c\/td\u003e\n\u003ctd\u003eRecessed or directional spotlight\u003c\/td\u003e\n\u003ctd\u003eBathroom, kitchen, terrace under canopy\u003c\/td\u003e\n\u003ctd\u003ePins and recess depth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eG9 \/ G4\u003c\/td\u003e\n\u003ctd\u003eSmall fitting, low-voltage spotlight\u003c\/td\u003e\n\u003ctd\u003eWall light, bathroom mirror\u003c\/td\u003e\n\u003ctd\u003eTransformer type for 12 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 id=\"brancher-parallele\"\u003eHow to wire 3 bulbs in parallel?\u003c\/h2\u003e\n\u003cp\u003eTo wire three bulbs in parallel, each socket receives the live and neutral from the same line: the three are powered independently, if one blows, the others stay on. The connection is made with the power off, using connector blocks or wago connectors, in a box suited to humidity.\u003c\/p\u003e\n\n\u003ch3\u003eThe diagram: live, neutral and three sockets\u003c\/h3\u003e\n\u003cp\u003eThe line arrives in a box. The live goes out to each socket, the neutral follows the same path, and the earth joins the fitting when it is metal. Three branches, no loop: this is a parallel circuit, unlike a series circuit which would switch everything off if one bulb was missing. Switch off at the breaker before opening the box, never just at the switch.\u003c\/p\u003e\n\n\u003ch3\u003eWhat changes with IP65 bulbs outdoors\u003c\/h3\u003e\n\u003cp\u003eOutdoors, the weak point is not the bulb but the connection. The box must be placed away from splashes, with cable glands facing down and cable glands tightened. An open box under a terrace cancels the IP65 of the bulbs within two rains. For a low-voltage garden line, turn to the \u003ca href=\"\/collections\/ampoules-12v\"\u003e12V bulbs\u003c\/a\u003e and their waterproof transformer.\u003c\/p\u003e\n\n\u003ch2 id=\"temperature-couleur\"\u003eIP65 LED bulb: warm white or neutral white?\u003c\/h2\u003e\n\u003cp\u003eOutdoors, a warm white around 2700 K to 3000 K lights a terrace without a bluish effect and remains comfortable in the evening. A more neutral white, around 4000 K to 5000 K, makes outlines sharp near an entrance or a staircase. Temperature is chosen before power.\u003c\/p\u003e\n\n\u003ch3\u003e2700 K or 3000 K: which atmosphere on a terrace?\u003c\/h3\u003e\n\u003cp\u003eAt 2700 K, the light leans towards amber and brings the outdoors closer to the living room: perfect for a table, a summer dining area, a pergola. At 3000 K, the rendering remains warm but sharper, which helps to see steps and the edge of the pool. Both are also chosen according to the wall: a light render reflects a lot of light, dark wood cladding absorbs it.\u003c\/p\u003e\n\n\u003ch3\u003eNeutral white: for passage areas and entrances\u003c\/h3\u003e\n\u003cp\u003eAn outdoor staircase, a garage or a porch gain in legibility with a neutral white: steps, tools and locks are easier to distinguish. In a corridor at night, the difference is clear and avoids lighting up the whole floor. If you want to adjust the intensity according to the time, check compatibility with the \u003ca href=\"\/collections\/ampoules-led-a-variateur\"\u003edimmable LED bulbs\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"installer-entretien\"\u003eHow to install and maintain an IP65 bulb?\u003c\/h2\u003e\n\u003cp\u003eAn IP65 bulb screws in like any other, but the fitting's seal does half the work: a badly closed housing or an upward-facing socket lets water in. Clean with a damp sponge, without a direct jet on the socket, and check the seal once a year.\u003c\/p\u003e\n\n\u003ch3\u003eScrewing in an IP65 bulb without damaging the seal\u003c\/h3\u003e\n\u003cp\u003eSwitch off the power, let it cool, then screw in by hand without forcing: excessive tightening deforms the O-ring and creates a water passage. Check that the seal is in place and flexible before closing the diffuser. A downward-facing socket naturally drains water, unlike a vertical upward-facing socket which retains it.\u003c\/p\u003e\n\n\u003ch3\u003eCleaning the fitting and renewing the seal\u003c\/h3\u003e\n\u003cp\u003eA damp sponge is enough on the diffuser, with a mild product, never solvent on plastic or screen-printed glass. The seal should be replaced as soon as it hardens or whitens, generally after a few years outdoors. To find the right fitting to receive the bulb, browse \u003ca href=\"\/collections\/luminaire\"\u003ethe Designix lighting catalogue\u003c\/a\u003e and \u003ca href=\"\/collections\/luminaire\"\u003eour terrace and bathroom fittings\u003c\/a\u003e. For the light source, also compare the \u003ca href=\"\/collections\/ampoules-led-1\"\u003eLED bulbs\u003c\/a\u003e and the \u003ca href=\"\/collections\/ampoules-coloris-blanc\"\u003ewhite-coloured bulbs\u003c\/a\u003e if the fitting has a tinted diffuser.\u003c\/p\u003e\n\n\u003ch2 id=\"faq\"\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhich IP against rain?\u003c\/summary\u003e\n\u003cp\u003eAgainst rain, an IP44 rating is enough if the bulb stays under shelter. As soon as it is exposed to driving rain or a water jet, you need IP65: the first digit, 6, blocks dust, the second, 5, resists jets. Under a deep canopy, IP44 holds; on a facade, move to IP65.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between IP65 and IP68?\u003c\/summary\u003e\n\u003cp\u003eIP65 resists water jets without immersion; IP68 withstands continuous immersion under conditions defined by the manufacturer. For a terrace, a facade or a bathroom, IP65 covers the need. IP68 concerns immersed fittings, such as those in a pool or fountain.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eIs the IP44 standard mandatory for bathroom lighting?\u003c\/summary\u003e\n\u003cp\u003eFrench regulations govern bathroom lighting by zones around the bath and shower: the closer the zone to water, the higher the required rating. Away from water points, IP44 is the usual minimum; in volumes exposed to splashes, IP65 is safer. Have the installation approved by a professional.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat are the types of bulbs?\u003c\/summary\u003e\n\u003cp\u003eBulbs are distinguished first by their base: E27 and E14 screw, GU10 and GU5.3 pin, G9 and G4 for small fittings. Then come the technology, LED or filament, the colour temperature and the IP rating for damp rooms. A GU5.3 base in 12 V does not connect to a 220 V socket.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eIP65 outdoor bulb: can it stay outside all year round?\u003c\/summary\u003e\n\u003cp\u003eYes, an IP65 bulb is designed to stay outdoors: it resists rain and dust. Durability depends mainly on the fitting that receives it: a well-closed housing, a downward-facing socket and a seal in good condition extend its life. Check the seal every year.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2 id=\"reassurance\"\u003eOrdering from Designix\u003c\/h2\u003e\n\u003cp\u003eSecure payment, tracked delivery, returns and Designix customer service: you order the base and rating validated on your socket, and you return it if the shape does not suit the diffuser. Before confirming, re-read the base marked on the fitting and the space available around the socket; that is the only point that blocks an installation. The rest of the catalogue remains within reach: \u003ca href=\"\/collections\/ampoules\"\u003eall our bulbs\u003c\/a\u003e, the \u003ca href=\"\/collections\/ampoules-pour-salon\"\u003eliving room bulbs\u003c\/a\u003e, the \u003ca href=\"\/collections\/ampoules-pour-chambre\"\u003ebedroom bulbs\u003c\/a\u003e, the \u003ca href=\"\/collections\/ampoules-a-filament\"\u003efilament bulbs\u003c\/a\u003e and the \u003ca href=\"\/collections\/ampoules-retro\"\u003eretro bulbs\u003c\/a\u003e for a period facade.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"CollectionPage\",\"name\":\"IP65 bulbs: choosing a waterproof bulb for outdoor and bathroom use\",\"description\":\"IP65 bulbs: how to choose a waterproof LED bulb for outdoor, bathroom or garage use, which E27 or GU10 base and which IP rating depending on the room.\",\"url\":\"https:\/\/designix.fr\/collections\/ampoules-ip65\",\"isPartOf\":{\"@type\":\"WebSite\",\"name\":\"Designix\",\"url\":\"https:\/\/designix.fr\"},\"speakable\":{\"@type\":\"SpeakableSpecification\",\"cssSelector\":[\"h1\",\"h2\"]}},{\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/designix.fr\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Lighting\",\"item\":\"https:\/\/designix.fr\/collections\/luminaire\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Bulbs\",\"item\":\"https:\/\/designix.fr\/collections\/ampoules\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"IP65 bulbs: choosing a waterproof bulb for outdoor and bathroom use\",\"item\":\"https:\/\/designix.fr\/collections\/ampoules-ip65\"}]},{\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which IP against rain?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Against rain, an IP44 rating is enough if the bulb stays under shelter. As soon as it is exposed to driving rain or a water jet, you need IP65: the first digit, 6, blocks dust, the second, 5, resists jets.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between IP65 and IP68?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"IP65 resists water jets without immersion; IP68 withstands continuous immersion under conditions defined by the manufacturer. For a terrace, a facade or a bathroom, IP65 covers the need. IP68 concerns immersed fittings, such as those in a pool.\"}},{\"@type\":\"Question\",\"name\":\"Which IP is the most waterproof?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The higher the two digits, the more protective the rating: IP68 is the most waterproof of the two, with total dust protection and resistance to immersion. IP65 remains the usual level for non-immersed outdoor use.\"}},{\"@type\":\"Question\",\"name\":\"Is the IP44 standard mandatory for bathroom lighting?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"French regulations govern bathroom lighting by zones around the bath and shower: the closer the zone to water, the higher the required rating. Away from water points, IP44 is the usual minimum; in volumes exposed to splashes, IP65 is safer. Have the installation approved by a professional.\"}},{\"@type\":\"Question\",\"name\":\"What are the types of bulbs?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Bulbs are distinguished first by their base: E27 and E14 screw, GU10 and GU5.3 pin, G9 and G4 for small fittings. Then come the technology, LED or filament, the colour temperature and the IP rating for damp rooms.\"}},{\"@type\":\"Question\",\"name\":\"IP65 or IP66: what is the difference?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Both are dust-tight. IP65 resists projected water jets; IP66 resists more powerful jets, such as those from a pressure washer or the sea. For a terrace or a bathroom, IP65 is enough; IP66 is justified by the sea.\"}},{\"@type\":\"Question\",\"name\":\"IP65 outdoor bulb: can it stay outside all year round?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, an IP65 bulb is designed to stay outdoors: it resists rain and dust. Durability depends mainly on the fitting that receives it: a well-closed housing, a downward-facing socket and a seal in good condition extend its life.\"}}]}]\u003c\/script\u003e","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/8598\/2228\/collections\/designix-entete-ampoules-ip65-v1.jpg?v=1792434459","url":"https:\/\/designix-lighting.com\/collections\/ip65-bulbs.oembed","provider":"Designix","version":"1.0","type":"link"}