{"title":"E27 spotlights","description":"\u003cp\u003eAn E27 spot light is a fixture that takes a screw-in bulb with the same base as most table lamps: the bulb can be replaced, and its colour temperature and brightness changed, without touching the fixture. This collection brings together recessed, clip-on and ceiling projector versions, in metal or in white and black finishes.\u003c\/p\u003e\n\n\u003ch2 id=\"definition\"\u003eWhat is an E27 spot light and what light does it give?\u003c\/h2\u003e\n\u003cp\u003eAn E27 spot light fixture is recognisable by its socket: a screw-in bulb fits into it, just like on a bedside lamp. That is what sets it apart from an integrated LED spot, whose module is sealed. In practice, the light you get depends on the bulb you choose: a bulb at around 2700 K gives a warm white, around 4000 K a neutral white, and beyond that a cooler rendering. The fixture itself stays in place.\u003c\/p\u003e\n\n\u003ch3\u003eE27 spot light bulbs: what type of bulb should go inside?\u003c\/h3\u003e\n\u003cp\u003eThe four main families of bulbs are incandescent, halogen, compact fluorescent and LED. Not all of them come in E27, and not all accept a dimmer. For a spot light, the main hesitation is between an LED and a halogen, depending on the rendering you want. Check the maximum wattage allowed by the fixture, shown on its label: a bulb that draws too much heats up and wears out the socket. On the LED side, quality varies a lot: some flicker or render colours poorly, and their purchase price remains higher than a classic bulb.\u003c\/p\u003e\n\n\u003ch3\u003eWhy choose a bulb-based spot light rather than an integrated LED spot?\u003c\/h3\u003e\n\u003cp\u003eBecause the light is never fixed. A bulb that weakens is replaced in seconds, without dismantling the fixture or redoing the cut-out. You can also switch from a warm white to a more neutral white if the room changes use. The trade-off is bulk: an E27 bulb takes up space behind the trim, which matters on a low ceiling. An integrated LED module heats less at comparable brightness, but still releases heat from the back; loft insulation must not be allowed to press against it.\u003c\/p\u003e\n\n\u003ch2 id=\"disposition\"\u003eHow should spot lights be laid out on the ceiling?\u003c\/h2\u003e\n\u003cp\u003eSpot lights are distributed according to the areas to be lit rather than following a fixed number. Start with the places where something happens: worktop, table, reading corner. Then align the points on the axis of the furniture, and fill in the centre only if the room stays dark. A ceiling filled with evenly spaced points often lights less well than a set designed around how the room is used.\u003c\/p\u003e\n\n\u003ch3\u003eWhat spacing should be allowed between two E27 spot lights?\u003c\/h3\u003e\n\u003cp\u003eThere is no single distance: it depends on the beam diameter of the bulb, the ceiling height and the surface area. In general, the gap between two points is kept comparable to the one separating them from the wall, to avoid a dark band around the edge. On a recessed spot light, an E27 bulb requires a wider cut-out than an integrated LED model: it is better to measure the real bulk before drilling.\u003c\/p\u003e\n\n\u003ch3\u003eShould spot lights be aimed at a wall or at the floor?\u003c\/h3\u003e\n\u003cp\u003eAt the floor to light a working area, at the wall to light a surface without glare. An adjustable spot aimed at a light-coloured wall bounces back a soft light and visually enlarges the room, which is what \u003ca href=\"https:\/\/designix.fr\/collections\/spots-orientables-coloris-blanc\"\u003ewhite adjustable spots\u003c\/a\u003e placed around the edge are for. A spot pointing straight along the axis of an armchair, on the other hand, creates discomfort: move it rather than lowering the brightness. For a narrow passage, \u003ca href=\"\/collections\/spots-pour-couloir\"\u003ehallway models\u003c\/a\u003e only need regular marker lighting.\u003c\/p\u003e\n\n\u003ch2 id=\"cuisine\"\u003eHow many spot lights in a kitchen?\u003c\/h2\u003e\n\u003cp\u003eThe number depends on the surface area, the ceiling height and where you cook. Light the worktop, the sink and the preparation areas first, then add more for atmosphere. Several discreet points are better than a single source in the centre: that one drops your shadow exactly on the chopping board.\u003c\/p\u003e\n\n\u003ch3\u003eHow many points above a worktop?\u003c\/h3\u003e\n\u003cp\u003eEnough that your silhouette is not cast onto the worktop when you stand facing the unit. The simplest method is to place the points slightly in front of the worktop line, not just behind your head. If the ceiling is low, a recessed model saves space; among \u003ca href=\"\/collections\/spots-encastrables-pour-cuisine\"\u003ekitchen recessed spots\u003c\/a\u003e, fixed versions are enough above a linear worktop. For a more elaborate look, \u003ca href=\"\/collections\/spots-moderne-pour-cuisine\"\u003emodern kitchen spots\u003c\/a\u003e play on the finish as much as on the light.\u003c\/p\u003e\n\n\u003ch3\u003eCan you mix E27 spot lights and a pendant in a kitchen?\u003c\/h3\u003e\n\u003cp\u003eYes, and it is often the right answer: the pendant above the table or island for atmosphere, the spot lights for work. Keep a consistent colour temperature between the two, otherwise the difference is immediately visible. The mix also works in a large living room: take a look at \u003ca href=\"\/collections\/spots-led-pour-cuisine\"\u003eLED spots for the kitchen\u003c\/a\u003e and \u003ca href=\"\/collections\/spots-led-pour-salon\"\u003esolutions designed for the living room\u003c\/a\u003e to match the two areas.\u003c\/p\u003e\n\n\u003ch2 id=\"branchement\"\u003eHow do you wire spot lights in series or in parallel?\u003c\/h2\u003e\n\u003cp\u003eIn parallel, each spot stays independent: if one fails, the others keep working, and this is the usual wiring in homes. In series, the fixtures share the same circuit and go out together. The connection must follow the instructions and be carried out with the power off, breaker switched off.\u003c\/p\u003e\n\n\u003ch3\u003eSeries or parallel: which should you choose for spot lights?\u003c\/h3\u003e\n\u003cp\u003eParallel, in almost every case. It lets you switch off or replace one point without cutting power to the others, and it simplifies fault-finding. Series wiring is reserved for special uses and is rarely found in domestic lighting. If you are unsure about the existing circuit, call an electrician: the cable cross-section and the protection of the circuit cannot be guessed.\u003c\/p\u003e\n\n\u003ch3\u003eCan several spot lights be connected to the same switch?\u003c\/h3\u003e\n\u003cp\u003eYes, that is the most common case: several fixtures controlled together from a single switch. In that case, respect the terminal block of each spot, tighten the connections properly and do not crush the cable under the insulation, because overheating almost always comes from insufficient tightening or from a covered fixture. A class II fixture is protected by double insulation and has no earth terminal; a class I model, often in metal, must on the contrary be earthed. The product label decides, not habit.\u003c\/p\u003e\n\n\u003ch2 id=\"versions\"\u003eRecessed, clip-on or projector E27 spot light: which version should you choose?\u003c\/h2\u003e\n\u003cp\u003eThe recessed spot light is fitted into a false ceiling and stays discreet; the clip-on spot fixes to a shelf or a post and can be moved; the ceiling projector, surface-mounted, lights widely without a large cut-out. The choice depends mainly on your ceiling finish and the freedom you want to keep.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccaption\u003eWhich E27 spot light for which room\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eRoom\u003c\/th\u003e\n\u003cth\u003eType of E27 spot light\u003c\/th\u003e\n\u003cth\u003eWhat you are looking for\u003c\/th\u003e\n\u003cth\u003ePoint to check\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eKitchen\u003c\/td\u003e\n\u003ctd\u003eRecessed fixed or adjustable\u003c\/td\u003e\n\u003ctd\u003eLight the worktop and sink without cast shadow\u003c\/td\u003e\n\u003ctd\u003eClearance behind the bulb under the unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLiving room\u003c\/td\u003e\n\u003ctd\u003eRecessed or ceiling projector\u003c\/td\u003e\n\u003ctd\u003eAmbient lighting, dimming possible\u003c\/td\u003e\n\u003ctd\u003ePosition relative to the sofa and number of points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHallway\u003c\/td\u003e\n\u003ctd\u003eRecessed or E27 bulkhead\u003c\/td\u003e\n\u003ctd\u003eMark the passage without glare\u003c\/td\u003e\n\u003ctd\u003eRegular spacing and hallway width\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBedroom\u003c\/td\u003e\n\u003ctd\u003eRecessed adjustable or clip-on\u003c\/td\u003e\n\u003ctd\u003eLight a wall or read without direct light\u003c\/td\u003e\n\u003ctd\u003eSpot orientation and adjustable brightness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutdoors\u003c\/td\u003e\n\u003ctd\u003eProjector or sealed E27 bulkhead\u003c\/td\u003e\n\u003ctd\u003eLight an entrance or a terrace\u003c\/td\u003e\n\u003ctd\u003eFixture IP rating and suitable bulb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eRecessed E27 spot light: what needs to be planned in the ceiling\u003c\/h3\u003e\n\u003cp\u003eThree things: the cut-out, the depth and the cable route. The cut-out is the hole in the ceiling, not to be confused with the trim visible once the spot is in place. The depth must accommodate the bulb and its base, which takes more room than a flat LED module. Also allow clearance above, especially under an insulated ceiling. For a living room, \u003ca href=\"\/collections\/spots-encastrables-pour-salon\"\u003erecessed spots for the living room\u003c\/a\u003e and \u003ca href=\"\/collections\/spots-encastrables-coloris-blanc\"\u003ewhite recessed spots\u003c\/a\u003e blend into a light-coloured ceiling.\u003c\/p\u003e\n\n\u003ch3\u003eClip-on E27 spot light: what should you choose it for?\u003c\/h3\u003e\n\u003cp\u003eAnywhere drilling makes no sense: a rented worktop, a shelf, a desk, a workshop post. Its E27 socket takes the same bulb as your other fixtures, and it moves with how you use it. In a bedroom, it replaces a bedside lamp without taking up the nightstand; \u003ca href=\"\/collections\/spots-pour-chambre\"\u003espots specially for the bedroom\u003c\/a\u003e group together the formats that suit it. Its limit remains the nearby socket.\u003c\/p\u003e\n\n\u003ch2 id=\"exterieur\"\u003eOutdoor E27 spot light: how to light outside and which IP rating?\u003c\/h2\u003e\n\u003cp\u003eFor outdoors, choose a suitable E27 bulb and a fixture whose IP rating matches the exposure: IP44 at minimum under a canopy, more if the spot is exposed to rain. A sealed housing protects the socket, and the connection is made on a protected circuit, never on a simple extension lead.\u003c\/p\u003e\n\n\u003ch3\u003eIP44 E27 spot light: for which location?\u003c\/h3\u003e\n\u003cp\u003eIP44 means protection against water spray, not against immersion. It is suitable under a canopy, against a sheltered facade, under a porch. For a truly exposed terrace, you need to go up a level and check the rating on the fixture's data sheet rather than trusting appearances. No rating removes the need for careful installation: a badly refitted gasket lets water in just as surely as no gasket at all.\u003c\/p\u003e\n\n\u003ch3\u003eCan an ordinary E27 bulb be used outside?\u003c\/h3\u003e\n\u003cp\u003eThat depends on the bulb and on the fixture housing it. In a sealed, protected housing, a standard bulb may be suitable, but the socket remains the sensitive point: damp causes corrosion there. A bulb designed for outdoor use copes better with temperature swings. The subject cannot be handled on its own: first compare \u003ca href=\"\/collections\/spots-en-metal\"\u003emetal spots\u003c\/a\u003e, whose sealed housings protect the socket better, and check the rating given for each reference.\u003c\/p\u003e\n\n\u003ch2 id=\"dimmable\"\u003eDimmable E27 spot light: how do you vary the light?\u003c\/h2\u003e\n\u003cp\u003eAn E27 spot becomes dimmable if the bulb and the dimmer are compatible: a dimmable bulb on a dimmer designed for LEDs, or a classic bulb on a suitable dimmer. Pairing an old dimmer with an LED bulb often causes flickering, buzzing or cut-out, hence the importance of reading both sets of instructions before buying.\u003c\/p\u003e\n\n\u003ch3\u003eDimmable E27 spot light: how do you check compatibility?\u003c\/h3\u003e\n\u003cp\u003eLook for the words \"dimmable\" on the bulb packaging, then for the compatibility stated by the dimmer, often expressed for a type of load. If either piece of information is missing, consider that dimming is not guaranteed. Total wattage also matters: under too low a load, some dimmers drop out. \u003ca href=\"\/collections\/spots-a-variateur\"\u003eDimmer-compatible spots\u003c\/a\u003e and \u003ca href=\"\/collections\/spots-led-a-variateur\"\u003eLED dimming solutions\u003c\/a\u003e gather the relevant models.\u003c\/p\u003e\n\n\u003ch3\u003eCan a spot be made dimmable without changing the switch?\u003c\/h3\u003e\n\u003cp\u003eYes, with a connected bulb or a bulb whose brightness is adjusted by its own device. You then keep the wall switch for on and off, and dimming is controlled another way. The solution avoids redoing the wiring, but it depends on the quality of the bulb: it is the same freedom the E27 socket gives, and the same need to check what is claimed.\u003c\/p\u003e\n\n\u003ch2 id=\"accorder\"\u003eWhat are the different spot lights and how do you match them to the room?\u003c\/h2\u003e\n\u003cp\u003eSpot lights are classified by fixing, by orientation and by finish: recessed or surface-mounted, fixed or adjustable, in metal, white or black. They are matched by keeping the same colour family and a consistent temperature within a room, and by reserving adjustable models for areas that need precise lighting.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccaption\u003eColours and materials: the effect in the room\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003cth\u003eEffect in the room\u003c\/th\u003e\n\u003cth\u003eWhere it works best\u003c\/th\u003e\n\u003cth\u003eTo pair with\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003eDiscreet, the spot blends into the ceiling\u003c\/td\u003e\n\u003ctd\u003eLight rooms, small spaces\u003c\/td\u003e\n\u003ctd\u003eWhite ceilings and light joinery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eThe spot stands out and structures the ceiling\u003c\/td\u003e\n\u003ctd\u003eContemporary interiors, dark ceilings\u003c\/td\u003e\n\u003ctd\u003eDark joinery and hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003ctd\u003eAdds visible material without a strong colour\u003c\/td\u003e\n\u003ctd\u003eKitchens, entrances, rooms with character\u003c\/td\u003e\n\u003ctd\u003eTaps and handles in the same tone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign and modern\u003c\/td\u003e\n\u003ctd\u003eThe fixture plays a part in the decor\u003c\/td\u003e\n\u003ctd\u003eLiving rooms and living spaces\u003c\/td\u003e\n\u003ctd\u003eA single family of shapes per room\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhite or black E27 spot light: which should you choose?\u003c\/h3\u003e\n\u003cp\u003eWhite fades away, black shows. On a white ceiling, \u003ca href=\"\/collections\/spots-coloris-blanc\"\u003ewhite finishes\u003c\/a\u003e almost disappear and leave the light alone on show. On a dark ceiling or black joinery, \u003ca href=\"\/collections\/spots-coloris-noir\"\u003eblack finishes\u003c\/a\u003e draw a clean line and avoid a pale patch in the middle of the surface. Neither lights better: it is a question of how the ceiling reads visually.\u003c\/p\u003e\n\n\u003ch3\u003eHow do you match several spot lights in the same room?\u003c\/h3\u003e\n\u003cp\u003eBy limiting the number of families. A single finish tone per room, a single colour temperature for all bulbs, and shapes that echo each other. Reserve adjustable models for the places that need fine-tuning; for the rest, a fixed version is enough and stays more discreet. If you want a deliberate statement, \u003ca href=\"\/collections\/spots-design\"\u003edesign models\u003c\/a\u003e and the \u003ca href=\"\/collections\/spots-moderne\"\u003emodern style\u003c\/a\u003e pair well together. For continuity throughout the house, browse \u003ca href=\"\/collections\/luminaire\"\u003eall our light fixtures\u003c\/a\u003e before making your choice.\u003c\/p\u003e\n\n\u003cp\u003eOnce the finish and layout are settled, note the cut-out and depth of each spot before ordering, and check the compatibility of your bulbs. The collection grid shows the current price of each reference.\u003c\/p\u003e\n\n\u003cp\u003eDesignix supports this type of project: secure payment, tracked delivery, returns accepted and a customer service team you can reach. To place these spot lights within a coherent whole, see \u003ca href=\"\/collections\/luminaire\"\u003eour lighting universe\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"faq\"\u003eFrequently asked questions about E27 spot lights\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat are the different spot lights?\u003c\/summary\u003e\n\u003cp\u003eA distinction is made between recessed spots, which sit flush with the ceiling, surface-mounted spots or ceiling projectors, clip-on spots and bulkheads for passages. Each comes in a fixed or adjustable version, in white or black, and in a version with an interchangeable E27 socket.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the diameter of a recessed spot light?\u003c\/summary\u003e\n\u003cp\u003eIt depends on the model: distinguish the visible trim from the cut-out to be made in the ceiling. On an E27 socket spot, the bulk is greater than on an integrated LED spot, because the bulb takes up room behind. Measure both values before drilling.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eDo LED spot lights heat up?\u003c\/summary\u003e\n\u003cp\u003eAn LED heats less than a halogen bulb at comparable brightness, but its module and driver still release heat. On a recessed spot, this heat escapes from the back: loft insulation must not be allowed to press against the fixture.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat are the drawbacks of LED bulbs?\u003c\/summary\u003e\n\u003cp\u003eThe purchase price remains higher than that of a classic bulb, and quality varies widely from one model to another: some flicker or render colours poorly. They are also sensitive to heat and often require a dimmer compatible with their electronics.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the fire risk associated with installing spot lights?\u003c\/summary\u003e\n\u003cp\u003eThe risk rarely comes from the bulb and almost always from the installation: loose connections, undersized cable, fixture covered with insulation or unsuitable dimmer. Following the instructions, tightening the terminal block correctly and having an electrician handle the circuit limit this risk.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhy no earth on an LED spot light?\u003c\/summary\u003e\n\u003cp\u003eA class II fixture is protected by double insulation: it has no earth terminal. A class I fixture, often in metal, must on the contrary be earthed. It is the class shown on the product label that determines the connection.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhich is the most powerful LED?\u003c\/summary\u003e\n\u003cp\u003ePower is read in lumens rather than watts: two bulbs with the same consumption can light very differently. A high-flux LED draws more and heats more, so you must check that it fits inside the fixture and that the fixture accepts that wattage. Then compare \u003ca href=\"\/collections\/luminaire\"\u003esee the whole range\u003c\/a\u003e to find the format suited to your room.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"CollectionPage\",\"name\":\"E27 spot lights: choosing and installing an E27 bulb spot light\",\"description\":\"Recessed, clip-on or projector E27 spot light: how to choose, lay out and wire an E27 bulb spot light according to the room and the IP rating.\",\"url\":\"https:\/\/designix.fr\/collections\/spots-e27\",\"isPartOf\":{\"@type\":\"WebSite\",\"name\":\"Designix\",\"url\":\"https:\/\/designix.fr\"},\"speakable\":{\"@type\":\"SpeakableSpecification\",\"cssSelector\":[\"h1\",\"h2\"]}},{\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/designix.fr\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Lighting\",\"item\":\"https:\/\/designix.fr\/collections\/luminaire\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Spot lights\",\"item\":\"https:\/\/designix.fr\/collections\/spots\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"E27 spot lights: choosing and installing an E27 bulb spot light\",\"item\":\"https:\/\/designix.fr\/collections\/spots-e27\"}]},{\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What are the different spot lights?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A distinction is made between recessed spots, which sit flush with the ceiling, surface-mounted spots or ceiling projectors, clip-on spots and bulkheads for passages. Each comes in a fixed or adjustable version, in white or black, and in a version with an interchangeable E27 socket.\"}},{\"@type\":\"Question\",\"name\":\"What is the diameter of a recessed spot light?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The useful diameter of a recessed spot light depends on the model: you need to distinguish the visible trim from the cut-out to be made in the ceiling. On an E27 socket spot, the bulk is greater than on an integrated LED spot, because the bulb takes up room behind.\"}},{\"@type\":\"Question\",\"name\":\"Do LED spot lights heat up?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"An LED heats less than a halogen bulb at comparable brightness, but its module and driver still release heat. On a recessed spot, this heat escapes from the back: loft insulation must not be allowed to press against the fixture.\"}},{\"@type\":\"Question\",\"name\":\"What are the drawbacks of LED bulbs?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The purchase price remains higher than that of a classic bulb, and quality varies widely from one model to another: some LEDs flicker or render colours poorly. They are also sensitive to heat and often require a dimmer compatible with their electronics.\"}},{\"@type\":\"Question\",\"name\":\"What is the fire risk associated with installing LED spot lights?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The risk rarely comes from the bulb and almost always from the installation: loose connections, undersized cable, fixture covered with insulation or unsuitable dimmer. Following the instructions, tightening the terminal block correctly and having an electrician handle the circuit limit this risk.\"}},{\"@type\":\"Question\",\"name\":\"Why no earth on an LED spot light?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A class II fixture is protected by double insulation: it has no earth terminal. A class I fixture, often in metal, must on the contrary be earthed. It is the class shown on the product label that determines the connection.\"}},{\"@type\":\"Question\",\"name\":\"What are the 4 types of bulbs?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The four main families are incandescent, halogen, compact fluorescent and LED. Not all of them come in an E27 socket, and not all accept a dimmer. For an E27 spot light, the main choice is between an LED and a halogen, depending on the rendering you want.\"}},{\"@type\":\"Question\",\"name\":\"Which is the most powerful LED?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Power is read in lumens rather than watts: two bulbs with the same consumption can light very differently. A high-flux LED draws more and heats more, so you must check that it fits inside the fixture and that the fixture accepts that wattage.\"}}]}]}\u003c\/script\u003e","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/8598\/2228\/collections\/designix-entete-spots-e27-v1.jpg?v=1791574585","url":"https:\/\/designix-lighting.com\/collections\/e27-spot-light-bulbs.oembed","provider":"Designix","version":"1.0","type":"link"}