{"title":"220V Outdoor LED Strips","description":"\u003cp\u003eA 220V outdoor LED strip connects directly to the mains, with no transformer to house on a facade or under a canopy. Choose a sheathed, cuttable strip in the colour temperature that suits stone, wood or a path, then entrust the mains connection to a qualified installer.\u003c\/p\u003e\n\n\u003ch2 id=\"what-is-a-220v-outdoor-led-strip\"\u003eWhat is a 220V outdoor LED strip?\u003c\/h2\u003e\n\u003cp\u003eThe 220V LED strip runs on 230 V and needs no transformer: the flexible sheath around it protects the components from splashes, and the connectors sit inside a waterproof box. It is installed when you want a continuous line on a facade, under a canopy or along a terrace, with no visible housing.\u003c\/p\u003e\n\n\u003ch3\u003eDoes a 220V LED strip need a transformer?\u003c\/h3\u003e\n\u003cp\u003eNo. The 220V strip runs straight from the mains, whereas a 12V or 24V strip depends on a low-voltage driver that must be housed under cover, often far from the line. This difference matters outdoors, where space is short under a canopy or in a facade box. Low-voltage versions remain useful when a driver is already planned: see \u003ca href=\"https:\/\/designix.fr\/collections\/rubans-led-24v\"\u003ethe 24V low-voltage versions\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003e220V or 24V outdoor LED strip: what is the difference when installing?\u003c\/h3\u003e\n\u003cp\u003eIn 220V, there is a single line to run, a single protected connection point, and the length available per run is stated on the model's data sheet. In 24V, you must add the driver's location, voltage drop over long lengths and one more box to hide. 220V simplifies installation on a facade and on a hard-to-reach wall; the \u003ca href=\"\/collections\/rubans-led-220v\"\u003erange of 220V LED strips\u003c\/a\u003e gathers the relevant models.\u003c\/p\u003e\n\n\u003ch2 id=\"where-to-install-a-220v-outdoor-led-strip\"\u003eWhere to install a 220V outdoor LED strip?\u003c\/h2\u003e\n\u003cp\u003eOn a facade, under a canopy, along a terrace or a path, the strip is fixed flat, sheltered from direct runoff, and the junctions lead into a waterproof box. Check the stated protection rating against the wall's actual exposure before sticking anything down. Outdoors, aim for IP65 under a canopy and IP68 in direct exposure; for custom 220V lengths, contact Designix customer service.\u003c\/p\u003e\n\n\u003ch3\u003eUnder a canopy or pergola\u003c\/h3\u003e\n\u003cp\u003eThe area is sheltered from driving rain but not from damp: a sheathed strip holds up well there, provided the surface is dry and dust-free when bonding. Aim for the purlin or joist, never the face exposed to the prevailing wind. The \u003ca href=\"\/collections\/rubans-led-etanches\"\u003ewaterproof models for exposed outdoor use\u003c\/a\u003e are used when splashes reach the area.\u003c\/p\u003e\n\n\u003ch3\u003eAlong a terrace edge and a path\u003c\/h3\u003e\n\u003cp\u003eOn the ground or on a step nosing, the strip becomes a circulation marker: you need a reinforced sheath, mechanical fixings rather than adhesive, and a water path that does not pool on the profile. Near a pond, keep the line low and choose a version designed for damp conditions, such as \u003ca href=\"\/collections\/rubans-led-pour-piscine\"\u003elighting for pool surroundings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eLocation\u003c\/th\u003e\n\u003cth\u003eWhat you want\u003c\/th\u003e\n\u003cth\u003eWhat to check on the data sheet\u003c\/th\u003e\n\u003cth\u003ePoint of caution\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFacade or exposed wall\u003c\/td\u003e\n\u003ctd\u003econtinuous line, grazing light\u003c\/td\u003e\n\u003ctd\u003eprotection rating suited to exposure\u003c\/td\u003e\n\u003ctd\u003eprotected connectors and ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnder a canopy, covered terrace\u003c\/td\u003e\n\u003ctd\u003ediscreet, continuous ambience\u003c\/td\u003e\n\u003ctd\u003esheath, available length, colour temperature\u003c\/td\u003e\n\u003ctd\u003eclean, dry surface before bonding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpen terrace, path\u003c\/td\u003e\n\u003ctd\u003emarking along an edge or on the ground\u003c\/td\u003e\n\u003ctd\u003ereinforced sheath, mechanical fixings\u003c\/td\u003e\n\u003ctd\u003erunoff and standing water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePool surroundings\u003c\/td\u003e\n\u003ctd\u003elow light, no glare\u003c\/td\u003e\n\u003ctd\u003eversion designed for damp outdoor use\u003c\/td\u003e\n\u003ctd\u003edistance to swimming areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConservatory, outdoor lounge\u003c\/td\u003e\n\u003ctd\u003ewarm accent light\u003c\/td\u003e\n\u003ctd\u003e2700 K to 3000 K, 220V supply\u003c\/td\u003e\n\u003ctd\u003ecable routing and nearby socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2 id=\"what-light-for-outdoors\"\u003eWhat light for outdoors: warm white, neutral white or colours?\u003c\/h2\u003e\n\u003cp\u003eColour temperature sets the mood. A warm white between 2700 and 3000 K warms a stone facade or a wooden terrace, a neutral white around 4000 K lights a path clearly, and an RGB strip changes the mood through the evening.\u003c\/p\u003e\n\n\u003ch3\u003eWarm white 2700 K or 3000 K: which for a facade?\u003c\/h3\u003e\n\u003cp\u003e2700 K leans towards the light of a filament bulb: it flatters stone, brick and woodwork, and pairs well with warm interior lighting. 3000 K stays warm but renders colours more accurately and details more legibly, which suits a terrace where people sit. For a very warm result, see \u003ca href=\"\/collections\/rubans-led-2700k\"\u003ethe very warm light of 2700K\u003c\/a\u003e; for a legible compromise, \u003ca href=\"\/collections\/rubans-led-3000k\"\u003ea warm white result in 3000K\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eRGB strip: what else to plan for\u003c\/h3\u003e\n\u003cp\u003eA colour strip adds a controller and a remote within reach, housed somewhere accessible and protected. It serves a changing mood, not functional lighting: to light properly, a dedicated white remains necessary. So allow for a four-channel model, see \u003ca href=\"\/collections\/rubans-led-rgbw\"\u003eRGBW strips with dedicated white\u003c\/a\u003e, rather than a plain RGB for a terrace used in the evening.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eResult\u003c\/th\u003e\n\u003cth\u003eTemperature\u003c\/th\u003e\n\u003cth\u003eMood\u003c\/th\u003e\n\u003cth\u003eWhere to use it\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVery warm white\u003c\/td\u003e\n\u003ctd\u003e2700 K\u003c\/td\u003e\n\u003ctd\u003ewarm, close to halogen\u003c\/td\u003e\n\u003ctd\u003estone, wood, residential facade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarm white\u003c\/td\u003e\n\u003ctd\u003e3000 K\u003c\/td\u003e\n\u003ctd\u003esoft and legible\u003c\/td\u003e\n\u003ctd\u003eterrace, canopy, outdoor lounge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeutral white\u003c\/td\u003e\n\u003ctd\u003e4000 K\u003c\/td\u003e\n\u003ctd\u003ecrisp, functional\u003c\/td\u003e\n\u003ctd\u003epath, stairs, circulation area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eRGB or RGBW\u003c\/td\u003e\n\u003ctd\u003evaries with the moment\u003c\/td\u003e\n\u003ctd\u003eparty terrace, garden\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2 id=\"cuttable-led-strip\"\u003eCuttable LED strip: how does it work?\u003c\/h2\u003e\n\u003cp\u003eA cuttable strip has marks printed on its sheath: cut only at these marks, which delimit a complete group of LEDs. The spacing between marks depends on the model and is given on the data sheet. A separated section cannot be connected to the rest, so adapt the length before installation.\u003c\/p\u003e\n\n\u003ch3\u003eLocate the cut points before measuring\u003c\/h3\u003e\n\u003cp\u003eUnroll the strip flat over the actual length, mark the start and end, then find the nearest cut mark while staying within the measurement. Cutting between two marks leaves an incomplete group that will not light. \u003ca href=\"\/collections\/rubans-led\"\u003eLED strips by use\u003c\/a\u003e differ precisely in their lengths and marks, to be read data sheet by data sheet.\u003c\/p\u003e\n\n\u003ch3\u003eCan an already cut strip be extended?\u003c\/h3\u003e\n\u003cp\u003eNo, not by joining it end to end reliably outdoors. The maximum length per run is given by the manufacturer: beyond that, use an additional power supply rather than stacking sections. So measure twice, add the corner returns, and keep a small margin at the ends for the connectors.\u003c\/p\u003e\n\n\u003ch2 id=\"installing-and-connecting\"\u003eHow to install and connect a 220V outdoor LED strip?\u003c\/h2\u003e\n\u003cp\u003eInstallation starts with a clean surface and a straight line: profile, clips or reinforced adhesive depending on the model. The 230 V connection is made with the power off, in a protected junction box with a cable gland; it is a job for a qualified installer, as with any work on an outdoor circuit.\u003c\/p\u003e\n\n\u003ch3\u003eFixing straight: profile, clips or adhesive\u003c\/h3\u003e\n\u003cp\u003eAn aluminium profile protects the sheath, diffuses the light and evens out small wall defects: it is the safe choice on render or irregular stone. Mechanical clips hold on a rough or damp surface, where adhesive fails at the first frost. Reinforced adhesive is enough on a smooth, clean and perfectly dry surface.\u003c\/p\u003e\n\n\u003ch3\u003eConnecting to the mains safely: what is down to the installer\u003c\/h3\u003e\n\u003cp\u003eThe link to the outdoor network, circuit protection and waterproof junctions require a professional's hand. In preparation, you can clear the cable route, position the box under cover, provide the cable gland and leave the strip unconnected. The rest is confirmed once the assembly is closed.\u003c\/p\u003e\n\n\u003ch2 id=\"strip-wall-light-or-ceiling-light\"\u003eLED strip, LED wall light or LED ceiling light: which to choose outdoors?\u003c\/h2\u003e\n\u003cp\u003eA strip draws a continuous line and highlights architecture; an LED wall light or LED ceiling light illuminates a specific area, an entrance, a canopy, an outdoor lounge. On an open terrace, the strip suits the ambience and the wall light suits the passage: the two complement each other more than they replace each other.\u003c\/p\u003e\n\n\u003ch3\u003eLED lighting on a canopy ceiling: which fixture?\u003c\/h3\u003e\n\u003cp\u003eUnder a canopy, you need to see what you are doing: set down a glass, look for keys, read. An LED ceiling light or wall light directs light down onto the work surface, where a strip stuck at the top of the wall gives only grazing light. The \u003ca href=\"\/collections\/luminaire\"\u003eDesignix lighting catalogue\u003c\/a\u003e gathers these families, to compare with the strip according to the area to cover.\u003c\/p\u003e\n\n\u003ch3\u003eComplementing a strip with a facade wall light\u003c\/h3\u003e\n\u003cp\u003eThe most legible combination: a wall light near the door for the passage, a strip in a low line for ambience. Both on the same control saves switching on three switches when you come home. For an outdoor lounge or a conservatory, \u003ca href=\"\/collections\/rubans-led-pour-salon\"\u003eLED strips for the living room\u003c\/a\u003e give power levels suited to seated use, and \u003ca href=\"\/collections\/luminaire\"\u003eall our lighting for home and outdoors\u003c\/a\u003e complete the set.\u003c\/p\u003e\n\n\u003ch2 id=\"maintenance-and-budget\"\u003eHow to maintain an outdoor LED strip and judge the budget?\u003c\/h2\u003e\n\u003cp\u003eMaintenance is limited to dusting the sheath with clean water and checking, before each season, the condition of the connectors and fixings. On budget, the most accessible models are simple white strips; COB, RGBW or reinforced-sheath versions sit higher in the range.\u003c\/p\u003e\n\n\u003ch3\u003eCleaning and checks before winter\u003c\/h3\u003e\n\u003cp\u003eA damp cloth, never a direct jet or abrasive product on the sheath. Then check the clips, the ends and the tightness of the cable gland, and remove leaves and debris accumulated on the profile: a blocked water outlet eventually lets damp in. A well-fixed, well-sealed strip goes through the seasons without intervention.\u003c\/p\u003e\n\n\u003ch3\u003eEntry level or durable model: where the gap lies\u003c\/h3\u003e\n\u003cp\u003eThe price gap comes down to three points: the sheath (flexible or reinforced silicone), the LED type (simple or COB for a line without dots) and the presence of a dedicated white in colour versions. An accessible strip suits an ambience line under a canopy; a highly exposed facade justifies a sturdier sheath and mechanical fixings.\u003c\/p\u003e\n\n\u003cp\u003eTo choose, count the linear metres to cover: an ambience line highlights a terrace, an additional fixture lights the passages. To equip a whole terrace, start with the ambience line, then complete with \u003ca href=\"\/collections\/rubans-led-220v\"\u003ethe strips that work without a transformer\u003c\/a\u003e and a passage light.\u003c\/p\u003e\n\n\u003ch2 id=\"faq\"\u003eFrequently asked questions about 220V outdoor LED strips\u003c\/h2\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow many metres of LED strip should I plan for a terrace?\u003c\/summary\u003e\n\u003cp\u003eMeasure the linear metres to cover, add the corner returns and keep a margin at the ends for the connectors. The maximum length per run is given on the model's data sheet: beyond that, plan an additional power supply rather than connecting in series.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eCan a 220V LED strip be left outside in the rain?\u003c\/summary\u003e\n\u003cp\u003eIt all depends on the model's protection rating and sheath, as well as the protection of the connectors: a strip designed for outdoor use withstands splashes, not immersion. Check the stated rating on the data sheet and place the junctions in a closed waterproof box.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eLED ceiling lighting or LED strip: which to choose for a terrace?\u003c\/summary\u003e\n\u003cp\u003eAn LED ceiling light or LED wall light illuminates an area and makes a passage safe; the strip highlights a line, a wall, a step, and sets the mood. On a covered terrace, the two are often combined: the fixture to see clearly, the strip for accompanying light.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhich outdoor LED strip to choose between warm white and RGB?\u003c\/summary\u003e\n\u003cp\u003eWarm white, around 2700 to 3000 K, suits a facade or terrace you want warm and stable. RGB serves a changing mood, with a controller and remote to plan for. If the strip must also light properly, an RGBW provides a dedicated white.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow to connect a 220V LED strip to the mains?\u003c\/summary\u003e\n\u003cp\u003eThe connection is made with the power off, on a protected junction box, with a cable gland for the cable entry. This work on an outdoor circuit is down to a qualified installer: the strip is prepared and fixed, the link to the network is confirmed afterwards, once waterproofing is assured.\u003c\/p\u003e\u003c\/details\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"CollectionPage\",\"name\":\"220V outdoor LED strips: choosing and installing without a transformer\",\"description\":\"220V outdoor LED strips: direct mains supply, waterproof sheath, installation on a facade or terrace. Selection criteria, cutting, wiring and maintenance.\",\"url\":\"https:\/\/designix.fr\/collections\/rubans-led-d-exterieur-220v\",\"isPartOf\":{\"@type\":\"WebSite\",\"name\":\"Designix\",\"url\":\"https:\/\/designix.fr\"},\"speakable\":{\"@type\":\"SpeakableSpecification\",\"cssSelector\":[\"h1\",\"h2\"]}},{\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/designix.fr\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Lighting\",\"item\":\"https:\/\/designix.fr\/collections\/luminaire\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Strips\",\"item\":\"https:\/\/designix.fr\/collections\/rubans\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"220V outdoor LED strips: choosing and installing without a transformer\",\"item\":\"https:\/\/designix.fr\/collections\/rubans-led-d-exterieur-220v\"}]},{\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Cuttable LED strip: how does it work?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Cut only at the marks printed on the sheath, which close a complete group of LEDs; the spacing between marks is specific to the model and is given on the data sheet. A detached section cannot be connected to the rest: better to measure twice before cutting.\"}},{\"@type\":\"Question\",\"name\":\"Does a 220V outdoor LED strip need a transformer?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No: a 220V strip plugs into the mains and has no transformer to house, unlike 12V or 24V strips that depend on a driver. This simplifies installation on a facade, where there is no room for a box. The mains connection should still be entrusted to a qualified installer.\"}},{\"@type\":\"Question\",\"name\":\"How many metres of LED strip should I plan for a terrace?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Measure the linear metres to cover, add the corner returns and keep a margin at the ends for the connectors. The maximum length per run is given on the model's data sheet: beyond that, plan an additional power supply rather than connecting in series.\"}},{\"@type\":\"Question\",\"name\":\"Can a 220V LED strip be left outside in the rain?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It all depends on the model's protection rating and sheath, as well as the protection of the connectors: a strip designed for outdoor use withstands splashes, not immersion. Check the stated rating on the data sheet and place the junctions in a closed waterproof box.\"}},{\"@type\":\"Question\",\"name\":\"LED ceiling lighting or LED strip: which to choose for a terrace?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"An LED ceiling light or LED wall light illuminates an area and makes a passage safe; the strip highlights a line, a wall, a step, and sets the mood. On a covered terrace, the two are often combined: the fixture to see clearly, the strip for accompanying light.\"}},{\"@type\":\"Question\",\"name\":\"Which outdoor LED strip to choose between warm white and RGB?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Warm white, around 2700 to 3000 K, suits a facade or terrace you want warm and stable. RGB serves a changing mood, with a controller and remote to plan for. If the strip must also light properly, an RGBW provides a dedicated white.\"}},{\"@type\":\"Question\",\"name\":\"How to connect a 220V LED strip to the mains?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The connection is made with the power off, on a protected junction box, with a cable gland for the cable entry. This work on an outdoor circuit is down to a qualified installer: the strip is prepared and fixed, the link to the network is confirmed afterwards, once waterproofing is assured.\"}}]}]}\u003c\/script\u003e","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/8598\/2228\/collections\/designix-entete-rubans-led-d-exterieur-220v-v1.jpg?v=1792704608","url":"https:\/\/designix-lighting.com\/collections\/220v-outdoor-led-strips.oembed","provider":"Designix","version":"1.0","type":"link"}