{"title":"12V IP65 Spotlights","description":"\u003cp\u003eFirst check the space above the ceiling and the power supply: at 12V, a spotlight is never wired directly to the mains, it goes through a transformer that steps the voltage down. The IP65 rating then allows installation in a wet room, under a canopy or on a covered terrace.\u003c\/p\u003e\n\n\u003cnav\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"#definition\"\u003eWhat a 12V IP65 spotlight is and where to install it\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#choisir\"\u003eHow to choose a 12V IP65 recessed spotlight\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#branchement\"\u003eHow to wire spotlights in series or parallel\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#disposition\"\u003eHow to lay out spotlights on the ceiling\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#cuisine\"\u003eHow many spotlights in a kitchen\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#erreurs\"\u003eMistakes to avoid before buying\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#style\"\u003eColours, formats and style by room\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#entretien\"\u003eMaintaining the spotlight and preserving its seal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#faq\"\u003eFrequently asked questions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\n\n\u003ch2 id=\"definition\"\u003eWhat is a 12V IP65 spotlight and which room should it go in?\u003c\/h2\u003e\n\u003cp\u003eA 12V IP65 spotlight runs on very low voltage: it is powered by a transformer that steps down the 230V mains supply. The IP65 rating protects it from dust and water spray, which makes it suitable for bathrooms, wet rooms and sheltered outdoor areas such as canopies or covered terraces.\u003c\/p\u003e\n\n\u003ch3\u003e12V IP65 spotlight: what very low voltage changes\u003c\/h3\u003e\n\u003cp\u003e12V requires a transformer or LED driver housed above the ceiling. The spotlight never receives mains voltage: if the existing supply comes from an old halogen setup, check that it accepts LED modules, otherwise you get flickering and dropouts. The result stays understated: a grazing light on a splashback, a soft halo on a wall, aligned points with no protrusion. \u003ca href=\"https:\/\/designix.fr\/collections\/spots-led-orientables\"\u003eAdjustable spotlights\u003c\/a\u003e take over when the beam needs to hit a precise surface.\u003c\/p\u003e\n\n\u003ch3\u003e12V IP65 spotlight in the shower: what the IP rating allows\u003c\/h3\u003e\n\u003cp\u003eIP65 covers water spray, which is what a shower wall is exposed to. What still needs checking on site is that the seal sits properly against the ceiling, that the recess housing holds firm and that the power supply is protected. Outside the shower zone, a simple recessed model is enough for the basin and circulation areas. The product instructions and local installation rules are the reference.\u003c\/p\u003e\n\n\u003ch2 id=\"choisir\"\u003eHow to choose a 12V IP65 recessed spotlight\u003c\/h2\u003e\n\u003cp\u003eThe choice comes down to four points: the spotlight base, the type of 12V power supply, the shape of the housing and the light colour. An adjustable model suits areas where the beam needs to hit a wall or a worktop, while an ultra-slim one fits into a shallow ceiling.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ccaption\u003eCriteria to compare on a 12V IP65 spotlight\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCriterion\u003c\/th\u003e\n\u003cth\u003eWhat to look at\u003c\/th\u003e\n\u003cth\u003eWhy it matters\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V very low voltage, powered by a transformer\u003c\/td\u003e\n\u003ctd\u003eDetermines the power supply needed above the ceiling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP65 marking\u003c\/td\u003e\n\u003ctd\u003eResists dust and water spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003eSpotlight and lamp base (GU5.3, G4 depending on model)\u003c\/td\u003e\n\u003ctd\u003eAn incompatible base prevents installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting type\u003c\/td\u003e\n\u003ctd\u003eRecessed, adjustable or ultra-slim\u003c\/td\u003e\n\u003ctd\u003eDepends on ceiling depth and the area to light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite, black or metal finish\u003c\/td\u003e\n\u003ctd\u003eMust match the ceiling and the rest of the room\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight\u003c\/td\u003e\n\u003ctd\u003eColour temperature and beam angle\u003c\/td\u003e\n\u003ctd\u003eAvoids shade differences from one room to another\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003e12V IP65 spotlight with transformer: built-in or remote?\u003c\/h3\u003e\n\u003cp\u003eA built-in transformer sits inside the housing and simplifies installation when the ceiling offers space. A remote model powers several points and can be replaced without dismantling the lighting, which counts during maintenance. The decision rests on the height available above the ceiling and access to that area.\u003c\/p\u003e\n\n\u003ch3\u003e12V IP65 LED spotlight: which light to choose?\u003c\/h3\u003e\n\u003cp\u003eGenerally, a warm white around 2700 to 3000K suits living rooms and bedrooms, a neutral white around 4000K suits worktops and circulation areas. Keep a single shade per room to avoid visible differences from one point to another. A narrow beam concentrates light, a wide beam spreads it. \u003ca href=\"\/collections\/spots-en-metal\"\u003eMetal spotlights\u003c\/a\u003e and \u003ca href=\"\/collections\/spots-led-design\"\u003espotlights with a crafted design\u003c\/a\u003e are chosen mainly for the line they draw on the ceiling.\u003c\/p\u003e\n\n\u003ch2 id=\"branchement\"\u003eHow to wire spotlights in series or parallel\u003c\/h2\u003e\n\u003cp\u003eAt 12V, spotlights are most often wired in parallel from the transformer: each point keeps its own supply and the others keep lighting if one fails. Series wiring makes all spotlights depend on the same circuit: one faulty lamp switches off the whole set.\u003c\/p\u003e\n\n\u003ch3\u003eSeries or parallel: which wiring for a 12V SELV spotlight?\u003c\/h3\u003e\n\u003cp\u003eParallel remains the standard for this type of installation: each spotlight receives the same voltage and troubleshooting is limited to the point at fault. The number of spotlights a transformer supports depends on the power stated by the manufacturer and the load actually connected, never on a fixed figure. The instructions are the reference. \u003ca href=\"\/collections\/spots-a-variateur\"\u003eDimmable-compatible models\u003c\/a\u003e are installed on the same wiring principle.\u003c\/p\u003e\n\n\u003ch3\u003eWhat happens when a spotlight blows on a series circuit\u003c\/h3\u003e\n\u003cp\u003eEverything goes out: the circuit is open. You then check spotlight by spotlight, starting with the one that has been used most. This is why series wiring is reserved for cases explicitly covered by the equipment instructions. If you control ambient dimming, \u003ca href=\"\/collections\/spots-led-a-variateur\"\u003edimmable LED spotlights\u003c\/a\u003e are wired the same way.\u003c\/p\u003e\n\n\u003ch2 id=\"disposition\"\u003eHow to lay out spotlights on the ceiling\u003c\/h2\u003e\n\u003cp\u003eFirst draw the room plan, then align the spotlights with the areas to light: worktop, walkway, basin. The spacing between two points depends on the ceiling height and the beam angle: the higher the ceiling, the further apart the spotlights go to avoid dark zones.\u003c\/p\u003e\n\n\u003ch3\u003eHow to distribute spotlights in a rectangular room\u003c\/h3\u003e\n\u003cp\u003eDraw axes parallel to the walls, then place the points on those lines rather than in a staggered pattern. Mark in pencil before drilling, checking the spacing against tall units, beams and dropped ceiling sections. For a hallway and for \u003ca href=\"\/collections\/spots-led-pour-salon\"\u003eliving room spotlights\u003c\/a\u003e, a regular grid gives a calmer light than an improvised layout. Remember to \u003ca href=\"\/collections\/spots-pour-couloir\"\u003elight a hallway\u003c\/a\u003e with points aligned along the circulation axis.\u003c\/p\u003e\n\n\u003ch3\u003eAdjustable or fixed spotlight: how to direct the beam?\u003c\/h3\u003e\n\u003cp\u003eAn adjustable model is justified when a surface needs angled lighting: splashback, accent wall, pictures. A fixed one suits a walkway or a room where light should fall straight down. Aim before tightening, then check there is no glare from the positions in use.\u003c\/p\u003e\n\n\u003ch2 id=\"cuisine\"\u003eHow many spotlights in a kitchen?\u003c\/h2\u003e\n\u003cp\u003eThere is no single number: the count depends on the floor area, ceiling height, beam angle and the areas to be treated separately. The worktop, sink, splashback and walkways are lit as distinct zones, rather than spreading points at random.\u003c\/p\u003e\n\n\u003ch3\u003eWorktop, sink, splashback: which areas to treat separately?\u003c\/h3\u003e\n\u003cp\u003eEach area calls for a different beam. On the worktop, an adjustable point aimed at the surface keeps you from working in your own shadow. Above the sink and splashback, a more grazing light brings out the materials. \u003ca href=\"\/collections\/spots-led-pour-cuisine\"\u003eKitchen lighting\u003c\/a\u003e is thus composed by use, not by ceiling symmetry.\u003c\/p\u003e\n\n\u003ch3\u003eFloor area and ceiling height: what changes the number of spotlights\u003c\/h3\u003e\n\u003cp\u003eThe same room needs fewer points under a low ceiling than under a high one, where the beam widens and loses useful intensity. Also allow for tall units, which intercept the light. \u003ca href=\"\/collections\/spots-encastrables-pour-cuisine\"\u003eRecessed kitchen spotlights\u003c\/a\u003e cover the common case, and \u003ca href=\"\/collections\/spots-moderne\"\u003ea contemporary look\u003c\/a\u003e pairs well with clean-lined kitchens.\u003c\/p\u003e\n\n\u003ch2 id=\"erreurs\"\u003e12V IP65 spotlight: which mistakes to avoid before buying?\u003c\/h2\u003e\n\u003cp\u003eThe most common mistake is ordering a 12V spotlight without checking the existing power supply, then pairing an old transformer with LED modules. Next come an incompatible base, an inconsistent light colour from one room to another and a forgotten ceiling depth.\u003c\/p\u003e\n\n\u003ch3\u003eWiring a 12V spotlight to 230V: why it is impossible\u003c\/h3\u003e\n\u003cp\u003eThe module is designed for a much lower supply voltage, provided by the transformer. Connecting it to the mains destroys it immediately. Before any purchase, identify what already powers the existing points and note the transformer or driver model, as well as the base of the current lamps.\u003c\/p\u003e\n\n\u003ch3\u003eCheck the existing power supply before ordering\u003c\/h3\u003e\n\u003cp\u003eThree readings prevent a product return: the output voltage of the power supply, the base of the existing sockets and the diameter of the existing cut-out. If you keep an old transformer designed for halogen, expect flickering with LEDs. \u003ca href=\"\/collections\/spots-encastrables-coloris-noir\"\u003eBlack recessed spotlights\u003c\/a\u003e and \u003ca href=\"\/collections\/spots-led-encastrables-coloris-noir\"\u003eblack recessed LED spotlights\u003c\/a\u003e are installed with exactly the same checks.\u003c\/p\u003e\n\n\u003ch2 id=\"style\"\u003eColours, formats and style: which 12V IP65 spotlight for which room?\u003c\/h2\u003e\n\u003cp\u003eThe colour is chosen with the ceiling: white to blend into a light painted ceiling, black to make a statement in a room with a dark ceiling or a bold style. The format follows the use: adjustable above a worktop, ultra-slim in a dropped ceiling, discreet in a hallway.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ccaption\u003eWhich 12V IP65 spotlight by room or area\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eRoom or area\u003c\/th\u003e\n\u003cth\u003eWhat the spotlight lights\u003c\/th\u003e\n\u003cth\u003ePreferred mounting\u003c\/th\u003e\n\u003cth\u003eWhat to check\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBathroom, shower zone\u003c\/td\u003e\n\u003ctd\u003eAmbience and shower wall\u003c\/td\u003e\n\u003ctd\u003eIP65 recessed\u003c\/td\u003e\n\u003ctd\u003eSeal seating and recess housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBathroom, outside shower\u003c\/td\u003e\n\u003ctd\u003eBasin, mirror, circulation\u003c\/td\u003e\n\u003ctd\u003eRecessed or adjustable\u003c\/td\u003e\n\u003ctd\u003eLight colour with the mirror\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKitchen, worktop\u003c\/td\u003e\n\u003ctd\u003eWorktop, sink, splashback\u003c\/td\u003e\n\u003ctd\u003eAdjustable aimed at the worktop\u003c\/td\u003e\n\u003ctd\u003ePosition relative to tall units\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKitchen, circulation\u003c\/td\u003e\n\u003ctd\u003eWalkways and dining corner\u003c\/td\u003e\n\u003ctd\u003eFixed recessed\u003c\/td\u003e\n\u003ctd\u003eRegular spacing between points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHallway\u003c\/td\u003e\n\u003ctd\u003eMovement, line of light\u003c\/td\u003e\n\u003ctd\u003eAligned recessed\u003c\/td\u003e\n\u003ctd\u003eAlignment and space in the dropped ceiling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheltered outdoor, canopy or covered terrace\u003c\/td\u003e\n\u003ctd\u003eEntrance and facade\u003c\/td\u003e\n\u003ctd\u003eIP65 recessed spotlight\u003c\/td\u003e\n\u003ctd\u003eProtected power supply and accessible transformer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhite or black spotlight: how to decide?\u003c\/h3\u003e\n\u003cp\u003eWhite disappears into a light ceiling and visually enlarges a small wet room. Black creates a deliberate contrast, especially on a dark or concrete ceiling. \u003ca href=\"\/collections\/spots-coloris-blanc\"\u003eWhite finishes\u003c\/a\u003e remain the safe choice for a discreet renovation, \u003ca href=\"\/collections\/spots-coloris-noir\"\u003eblack spotlights\u003c\/a\u003e make more of a statement.\u003c\/p\u003e\n\n\u003ch3\u003eModern, design or metal: which look in a wet room?\u003c\/h3\u003e\n\u003cp\u003eA metal finish brings a more material look, a crafted line stands out on the ceiling. For \u003ca href=\"\/collections\/spots-pour-chambre\"\u003esoft light in a bedroom\u003c\/a\u003e, stay with a discreet shade and a wide beam. The rest of the catalogue is visible in \u003ca href=\"\/collections\/luminaire\"\u003eour lighting catalogue\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"entretien\"\u003eHow to maintain a 12V IP65 spotlight and preserve its seal\u003c\/h2\u003e\n\u003cp\u003eThe seal of an IP65 spotlight depends on its gasket and the cleanliness of the cut-out. Clean the glass with a soft damp cloth, without abrasive products, and check the gasket after any work in the dropped ceiling. A crushed or displaced gasket means the spray protection is lost.\u003c\/p\u003e\n\n\u003ch3\u003eCleaning a bathroom spotlight without damaging the gasket\u003c\/h3\u003e\n\u003cp\u003eCut the power before any handling, wipe the glass without pressing on the gasket, and use no abrasive product. If the glass looks misted from the inside, it means the gasket is no longer doing its job: better to replace the spotlight than to force it.\u003c\/p\u003e\n\n\u003ch3\u003eAfter installation: what to check on the ceiling\u003c\/h3\u003e\n\u003cp\u003eCheck that the gasket sits evenly against the ceiling, that no housing moves in its cut-out and that the transformer remains accessible. Keep an access margin above the ceiling for \u003ca href=\"\/collections\/spots-encastrables-coloris-blanc\"\u003ewhite recessed spotlights\u003c\/a\u003e as for any other model.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSecure payment, tracked delivery, returns and Designix customer service\u003c\/strong\u003e support every order.\u003c\/p\u003e\n\n\u003cp\u003eBrowse \u003ca href=\"\/collections\/luminaire\"\u003eall Designix lighting\u003c\/a\u003e to compare the housings, colours and finishes available.\u003c\/p\u003e\n\n\u003ch2 id=\"faq\"\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e12V IP65 spotlight with transformer: built-in or separate?\u003c\/summary\u003e\n\u003cp\u003eA built-in transformer sits inside the spotlight housing and simplifies installation when the ceiling offers space. A separate or remote transformer powers several spotlights and can be replaced without dismantling the lighting. The choice depends on the space available and access above the ceiling.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan a 12V IP65 spotlight be installed in the shower?\u003c\/summary\u003e\n\u003cp\u003eThe IP65 rating protects the spotlight from dust and water spray, which matches the exposure of a shower zone. What still needs checking on site is the recess housing, the seal seating and the protection of the power supply. The product instructions and local installation rules are the reference.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e12V IP65 SELV spotlight: what is very low voltage?\u003c\/summary\u003e\n\u003cp\u003eVery low voltage means a 12V supply, obtained through a transformer that steps down the 230V mains. The spotlight therefore never receives mains voltage directly. This means checking compatibility between the existing transformer and the type of module installed.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e12V IP65 recessed spotlight: what cut-out should be planned in the ceiling?\u003c\/summary\u003e\n\u003cp\u003eThe cut-out depends on the housing diameter and the ceiling depth: both values appear on the product sheet and are measured before drilling. A template or a mark drawn with a compass limits discrepancies, and the recess must leave the gasket seated.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e12V IP65 LED spotlight: is a specific transformer needed?\u003c\/summary\u003e\n\u003cp\u003eAn LED module does not behave like a halogen lamp: the transformer must be designed to power LEDs and to handle the load actually connected. An old transformer paired with LED modules causes flickering or switch-off. The compatibility stated by the manufacturer is the reference.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"CollectionPage\",\"name\":\"12V IP65 spotlights: choosing a watertight recessed spotlight\",\"description\":\"12V IP65 spotlights: how to choose the base, the transformer and the ceiling layout, for a bathroom or a sheltered outdoor area protected from water.\",\"url\":\"https:\/\/designix.fr\/collections\/spots-12v-ip65\",\"isPartOf\":{\"@type\":\"WebSite\",\"name\":\"Designix\",\"url\":\"https:\/\/designix.fr\"},\"speakable\":{\"@type\":\"SpeakableSpecification\",\"cssSelector\":[\"h1\",\"h2\"]}},{\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/designix.fr\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Lighting\",\"item\":\"https:\/\/designix.fr\/collections\/luminaire\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Spotlights\",\"item\":\"https:\/\/designix.fr\/collections\/spots\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"12V IP65 spotlights: choosing a watertight recessed spotlight\",\"item\":\"https:\/\/designix.fr\/collections\/spots-12v-ip65\"}]},{\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How many spotlights in a kitchen?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The number depends on the floor area, the ceiling height, the beam angle and the number of areas to light. The worktop, sink, splashback and walkways are counted separately. A dimensioned plan, drawn before drilling, avoids dark zones as well as unnecessary points.\"}},{\"@type\":\"Question\",\"name\":\"How to wire spotlights in series or parallel?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"At 12V, parallel wiring from the transformer is the most common: each spotlight stays independent and the others keep lighting if one fails. Series wiring, where all points depend on the same circuit, is used only in cases covered by the instructions.\"}},{\"@type\":\"Question\",\"name\":\"How to lay out spotlights on the ceiling?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Draw the room plan, then place the spotlights above the useful areas: worktop, basin, circulation. The spacing between two points follows the ceiling height and the beam angle, to be checked before drilling to keep an even light.\"}},{\"@type\":\"Question\",\"name\":\"12V IP65 spotlight with transformer: built-in or separate?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A built-in transformer sits inside the spotlight housing and simplifies installation when the ceiling offers space. A separate or remote transformer powers several spotlights and can be replaced without dismantling the lighting. The choice depends on the space available and access above the ceiling.\"}},{\"@type\":\"Question\",\"name\":\"Can a 12V IP65 spotlight be installed in the shower?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The IP65 rating protects the spotlight from dust and water spray, which matches the exposure of a shower zone. What still needs checking on site is the recess housing, the seal seating and the protection of the power supply. The product instructions and local installation rules are the reference.\"}},{\"@type\":\"Question\",\"name\":\"12V IP65 SELV spotlight: what is very low voltage?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Very low voltage means a 12V supply, obtained through a transformer that steps down the 230V mains. The spotlight therefore never receives mains voltage directly. This means checking compatibility between the existing transformer and the type of module installed.\"}},{\"@type\":\"Question\",\"name\":\"12V IP65 recessed spotlight: what cut-out should be planned in the ceiling?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The cut-out depends on the housing diameter and the ceiling depth: both values appear on the product sheet and are measured before drilling. A template or a mark drawn with a compass limits discrepancies, and the recess must leave the gasket seated.\"}},{\"@type\":\"Question\",\"name\":\"12V IP65 LED spotlight: is a specific transformer needed?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"An LED module does not behave like a halogen lamp: the transformer must be designed to power LEDs and to handle the load actually connected. An old transformer paired with LED modules causes flickering or switch-off. The compatibility stated by the manufacturer is the reference.\"}}]}]}\u003c\/script\u003e","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/8598\/2228\/collections\/designix-entete-spots-12v-ip65-v1.jpg?v=1791740616","url":"https:\/\/designix-lighting.com\/collections\/12v-ip65-spotlights.oembed","provider":"Designix","version":"1.0","type":"link"}