{"title":"120 cm fluorescent tube","description":"\u003cp\u003eA 1.20 m tube is bought on three measurements: the overall length including pins, the tube diameter (T5 or T8) and the type of sockets on the luminaire. Note these three values before ordering, they decide compatibility, the quality of light and how easy the replacement will be.\u003c\/p\u003e\n\n\u003cnav\u003e\n\u003cp\u003eIn this guide:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"#lumiere\"\u003eLight and rooms\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#t5-t8\"\u003eT5 or T8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#mesurer\"\u003eMeasure before ordering\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#remplacer\"\u003eSwitch to LED\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#ballast\"\u003eChanging on a ballast\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#starter\"\u003eOld fitting and starter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#watts\"\u003e36 W and code 840\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#applique\"\u003eGlass tube wall light\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"#accorder\"\u003eMatching with the rest\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/nav\u003e\n\n\u003ch2 id=\"lumiere\"\u003eWhat light does a 120cm neon tube give and which room should it go in?\u003c\/h2\u003e\n\u003cp\u003eA 1.20 m tube spreads an even linear light along its whole length, with no hot spot or shadow area. That is what makes it effective above a worktop, a workbench or along a bathroom wall, where a point light would leave dark zones.\u003c\/p\u003e\n\n\u003ch3\u003eThe light of a 1.20 m tube above a worktop\u003c\/h3\u003e\n\u003cp\u003eLaid flat under a wall unit or in a strip fixed to the wall, the tube lights the worktop evenly along its whole length. Hands and utensils no longer cast a shadow on the chopping board. Placed close to a wall, it reveals the texture of the surface and visually enlarges a narrow hallway.\u003c\/p\u003e\n\n\u003ch3\u003eThe rooms where a 120cm tube finds its place\u003c\/h3\u003e\n\u003cp\u003eThe kitchen and its worktop, the garage and the workshop to see under a bonnet, the bathroom above the mirror, the hallway and the storeroom. In a damp room, the protection of the luminaire matters as much as the tube: see the \u003ca href=\"https:\/\/designix.fr\/collections\/tubes-led-etanches\"\u003ewaterproof LED tubes for damp rooms\u003c\/a\u003e and the \u003ca href=\"\/collections\/tubes-led-pour-salle-de-bain\"\u003ebathroom lighting\u003c\/a\u003e. For a shed or a covered terrace, move on to the \u003ca href=\"\/collections\/tubes-led-d-exterieur\"\u003eoutdoor LED tubes\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"t5-t8\"\u003eWhat is the difference between T5 and T8 neon tubes?\u003c\/h2\u003e\n\u003cp\u003eThe T8 is the most widespread tube: it equips most old strips and ceiling lights, with wide sockets. The T5 is slimmer and fits in compact or closed luminaires; at equal length, it needs a specific holder. The format is read on the length of the tube and on the sockets of the luminaire.\u003c\/p\u003e\n\n\u003ch3\u003eThe T8, format of old strips and ceiling lights\u003c\/h3\u003e\n\u003cp\u003eA 120cm T8 fluorescent tube slips into the wide sockets of a standard strip, a quarter turn to lock. It is the format still found in kitchens from the 2000s and in garages. Replacing it with a T8 LED tube is the easiest to source: see \u003ca href=\"\/collections\/tubes-led\"\u003eour LED tubes range\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eThe T5, slimmer, for compact and closed luminaires\u003c\/h3\u003e\n\u003cp\u003eThe T5 fits in a shallow box, under a glazed cabinet or in a closed wall light, where a T8 does not fit. It requires G5 sockets and a dedicated holder: a T5 tube never fits in a T8 strip. For a complete luminaire, compare the shapes in the \u003ca href=\"\/collections\/luminaire\"\u003eDesignix luminaire catalogue\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ccaption\u003eT5 or T8: what changes on a 1.20 m tube\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCriterion\u003c\/th\u003e\n\u003cth\u003eT5 tube\u003c\/th\u003e\n\u003cth\u003eT8 tube\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eThe slimmer of the two\u003c\/td\u003e\n\u003ctd\u003eThe wider, historic format\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSockets\u003c\/td\u003e\n\u003ctd\u003eDedicated holder, often built into the luminaire\u003c\/td\u003e\n\u003ctd\u003eWide sockets on a standard strip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120 cm length\u003c\/td\u003e\n\u003ctd\u003eExists in both formats\u003c\/td\u003e\n\u003ctd\u003eCommon format of ceiling lights and strips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitch to LED\u003c\/td\u003e\n\u003ctd\u003eDedicated T5 LED tube\u003c\/td\u003e\n\u003ctd\u003eT8 LED tube, the easiest to find\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWhere to find it\u003c\/td\u003e\n\u003ctd\u003eClosed luminaire, glazed cabinet\u003c\/td\u003e\n\u003ctd\u003eKitchen, garage, workshop, storeroom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 id=\"mesurer\"\u003eHow to measure the length of a 120cm neon tube before ordering?\u003c\/h2\u003e\n\u003cp\u003eMeasure the tube overall, pins included, then compare with the inner length of the strip. A 120 cm tube fits on a holder designed for that length: also check the distance between the sockets and the accepted diameter, otherwise the tube does not fit or does not line up.\u003c\/p\u003e\n\n\u003ch3\u003eMeasure the tube overall, pins included\u003c\/h3\u003e\n\u003cp\u003eRemove the tube and place the tape from one end of a pin to the other, not on the glass part alone. The commercial dimension matches this overall measurement. An old-model neon tube may show the same length with a different diameter, hence checking T5 or T8 before confirming the basket.\u003c\/p\u003e\n\n\u003ch3\u003eCheck the length of the strip and the distance between the sockets\u003c\/h3\u003e\n\u003cp\u003eThen measure the inside of the luminaire and the gap between the two sockets. A tube longer than the strip does not clip in; pins that do not line up give a tube that stays off. The two most frequent errors come from there, and from 1.50 m tubes ordered for a 1.20 m strip.\u003c\/p\u003e\n\n\u003ch2 id=\"remplacer\"\u003eIs it possible to replace a neon tube with an LED tube?\u003c\/h2\u003e\n\u003cp\u003eYes, in most luminaires, provided you choose an LED tube compatible with the ballast in place or have that ballast removed. Check the length, the sockets and the type of ballast before ordering. If the luminaire is old or cracked, replacing it entirely is often simpler.\u003c\/p\u003e\n\n\u003ch3\u003eWhat changes: starter, ballast and sockets\u003c\/h3\u003e\n\u003cp\u003eThe length and sockets stay the same, it is the power supply that changes. A 120cm LED tube designed for a starter holder fits like the old one, once the starter is neutralised. A tube stated as ballast-compatible works on the luminaire left as it is. The gain shows in instant start and lower consumption.\u003c\/p\u003e\n\n\u003ch3\u003eThe cases where replacing the luminaire is simpler\u003c\/h3\u003e\n\u003cp\u003eA rusted box, a broken reflector, a ballast that hums: in these cases, a new luminaire costs less time than the modification. Look at the \u003ca href=\"\/collections\/tubes-led\"\u003e1.20 m LED tubes\u003c\/a\u003e to keep the holder, or the \u003ca href=\"\/collections\/luminaire\"\u003eDesignix luminaire catalogue\u003c\/a\u003e to start from scratch with a \u003ca href=\"\/collections\/spot-tube\"\u003etube spotlight rail\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"ballast\"\u003eHow to change a neon tube on a luminaire with an integrated ballast?\u003c\/h2\u003e\n\u003cp\u003eCut the power at the breaker, then remove the tube with a quarter turn. The integrated ballast is behind the reflector: depending on whether it is magnetic or electronic, the new LED tube will be stated as compatible or will need to be powered directly, with the ballast removed. If in doubt, have the wiring checked.\u003c\/p\u003e\n\n\u003ch3\u003eCut the power and identify the type of ballast\u003c\/h3\u003e\n\u003cp\u003eCut at the breaker, not just at the switch. Unclip the diffuser, turn the tube a quarter turn and take it out. The ballast is the rectangular block fixed in the box: note the reference written on it and the number of wires leaving it, these two pieces of information are enough to choose the right tube.\u003c\/p\u003e\n\n\u003ch3\u003eWhen the ballast must be removed for an LED tube\u003c\/h3\u003e\n\u003cp\u003eA direct-power tube does not tolerate the ballast: it must be disconnected and the wires repositioned according to the diagram provided, live on one side, neutral on the other. This is an electrician's job if you are not comfortable. Compatible models avoid this step, see \u003ca href=\"\/collections\/tubes-led\"\u003eswitching to an LED tube\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"starter\"\u003eHow to fit an LED neon on an old holder and is a starter needed?\u003c\/h2\u003e\n\u003cp\u003eOn a starter holder, the LED tube designed for this setup fits like the old one, with the starter removed or replaced by the supplied dummy. On an electronic ballast holder, the tube must be stated as compatible. An LED tube that requires a direct power supply does not work on a holder left as it is.\u003c\/p\u003e\n\n\u003ch3\u003eAn LED tube on a starter holder: what to remove\u003c\/h3\u003e\n\u003cp\u003eThe starter is the small cylinder housed on the side of the strip. On an LED tube designed for this setup, it is unscrewed and the supplied dummy takes its place, or it is simply left absent. Leaving an active starter with an unsuitable tube causes flickering or a starting fault.\u003c\/p\u003e\n\n\u003ch3\u003eThe wiring diagram of an LED neon tube, in plain terms\u003c\/h3\u003e\n\u003cp\u003eOnly two cases. Starter holder: nothing to rewire, the tube is replaced. Ballast holder: either a compatible tube fits as it is, or the ballast is removed and the wires repositioned direct. Follow the diagram printed on the tube packaging, it is specific to each model. For a new luminaire, see the \u003ca href=\"\/collections\/spot-tube-noir\"\u003eblack finish tube spotlights\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"watts\"\u003eWhat do 36 W and 840 mean on a 120cm neon tube?\u003c\/h2\u003e\n\u003cp\u003e36 W is the reference power of 1.20 m fluorescent tubes. The code 840 reads in two parts: 8 for the colour rendering index, 40 for a colour temperature of 4000 K, a neutral white light. An LED tube shows its own power, lower at comparable illuminance. To compare, look at the flux in lumens and the lm\/W: these two values matter more than the power in watts.\u003c\/p\u003e\n\n\u003ch3\u003eRead the power and the code on the tube label\u003c\/h3\u003e\n\u003cp\u003eThe label printed on the glass gives the power, the colour code and sometimes the protection index. On a 120cm 36 W neon tube, the power does not tell the quantity of light: it is compared from a fluorescent to an LED only by taking the technology into account. Trust the new tube, not the power of the old one.\u003c\/p\u003e\n\n\u003ch3\u003e830, 840, 865: choosing the colour temperature\u003c\/h3\u003e\n\u003cp\u003eA warm white around 3000 K sets up a living room, a neutral white around 4000 K suits work and the kitchen, a cool white around 6500 K serves the garage and storerooms. Keep the same white family in a room, otherwise the difference shows on the walls.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ccaption\u003eDecoding the colour code written on a tube\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eTemperature\u003c\/th\u003e\n\u003cth\u003eRendering\u003c\/th\u003e\n\u003cth\u003eWhere to use it\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e830\u003c\/td\u003e\n\u003ctd\u003eWarm white 3000 K\u003c\/td\u003e\n\u003ctd\u003eCRI 80\u003c\/td\u003e\n\u003ctd\u003eLiving room, entrance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e840\u003c\/td\u003e\n\u003ctd\u003eNeutral white 4000 K\u003c\/td\u003e\n\u003ctd\u003eCRI 80\u003c\/td\u003e\n\u003ctd\u003eKitchen, office, workshop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e865\u003c\/td\u003e\n\u003ctd\u003eCool white 6500 K\u003c\/td\u003e\n\u003ctd\u003eCRI 80\u003c\/td\u003e\n\u003ctd\u003eGarage, outdoor, storeroom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 id=\"applique\"\u003eHow to choose a wall light with a glass tube?\u003c\/h2\u003e\n\u003cp\u003eA glass tube wall light spreads the light upwards and downwards, with a rendering softened by the glass. It is chosen according to the length of the tube it holds, the space available on the wall and the protection index if it is placed in a damp room. The glass is cleaned with soapy water.\u003c\/p\u003e\n\n\u003ch3\u003eThe glass tube, for a softened light on the wall\u003c\/h3\u003e\n\u003cp\u003eFrosted or ribbed glass breaks the linearity of the tube and spreads the light in a fan on the wall, without dazzling when you walk past. That is what distinguishes a wall light from a bare strip placed in a kitchen. Compare the shapes in the \u003ca href=\"\/collections\/applique-tube\"\u003etube wall lights\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhere to place a tube wall light in the house\u003c\/h3\u003e\n\u003cp\u003eOn either side of a bathroom mirror, above a sideboard, along a hallway or at the head of a bed instead of two lamps. Check the length of the accepted tube before drilling, and the protection index in a wet room. A matching model exists as \u003ca href=\"\/collections\/suspension-tube\"\u003etube pendants\u003c\/a\u003e and as \u003ca href=\"\/collections\/lampadaire-tube\"\u003etube floor lamps\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"accorder\"\u003eHow to match a 120 cm tube with the rest of the lighting?\u003c\/h2\u003e\n\u003cp\u003eA linear tube goes well with a pendant above the table and a floor lamp in the corner, provided you keep the same white family: neutral for working, warmer for living. Avoid mixing several temperatures in the same room, the eye quickly spots the difference.\u003c\/p\u003e\n\n\u003ch3\u003ePairing a tube with a pendant or a floor lamp\u003c\/h3\u003e\n\u003cp\u003eOn a worktop, the tube stays discreet and functional; above the table, a low pendant structures the room. The adjustable \u003ca href=\"\/collections\/spot-tube\"\u003etube spotlights\u003c\/a\u003e take over on a wall, while the \u003ca href=\"\/collections\/luminaire\"\u003eDesignix luminaire catalogue\u003c\/a\u003e lets you compose the whole of a room.\u003c\/p\u003e\n\n\u003ch3\u003eThe finishes and whites that work together\u003c\/h3\u003e\n\u003cp\u003eCheck the distance between the fixings and the type of sockets before choosing a 1.20 m tube; in a damp room, take a suitable IP rating. Stick to two temperatures maximum per level, and to one in a small room. See \u003ca href=\"\/collections\/tubes-led-pour-cuisine\"\u003ethe tubes for kitchen worktops\u003c\/a\u003e and the \u003ca href=\"\/collections\/tubes-led-pour-garage\"\u003egarage lighting\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003ca href=\"\/collections\/tubes-led\"\u003eSee the 1.20 m LED tubes and choose the right cap\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eSecure payment\u003c\/li\u003e\n\u003cli\u003eTracked delivery\u003c\/li\u003e\n\u003cli\u003eReturns\u003c\/li\u003e\n\u003cli\u003eDesignix customer service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the wattage of an LED neon tube?\u003c\/summary\u003e\n\u003cp\u003eIt is shown on the tube and on its packaging, never identical from one model to another. A 1.20 m LED tube consumes far less than a fluorescent tube of the same length for comparable illuminance. It is the tube label, not the power of the old one, that counts after the replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between neon and LED?\u003c\/summary\u003e\n\u003cp\u003eNeon refers to a gas fluorescent tube, with a ballast and often a starter, whose start takes a few moments. The LED tube uses diodes, starts immediately and consumes less at comparable illuminance. Both fit on holders of the same length, but the LED tube must be compatible with the luminaire ballast.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eIs it possible to fit an LED neon on a standard holder?\u003c\/summary\u003e\n\u003cp\u003eYes if the tube is stated as compatible with the holder in place. A luminaire with a starter accepts an LED tube designed for this setup, once the starter is removed. A luminaire with an electronic ballast requires a so-called ballast-compatible tube. Always check the length and the type of sockets before ordering.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow can I replace a fluorescent tube with an LED tube?\u003c\/summary\u003e\n\u003cp\u003eCut the power, remove the old tube with a quarter turn and note the length and the type of sockets. Choose an LED tube of the same length, compatible with the ballast or designed for a direct power supply. Reconnect, switch the breaker back on and check that no flickering appears.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eIs a starter needed for an LED tube?\u003c\/summary\u003e\n\u003cp\u003eNo, an LED tube does not need a starter to work. On a luminaire that has one, the starter is removed or replaced by the dummy supplied with the tube. The starter belongs to the fluorescent setup: leaving it in place with an unsuitable LED tube causes a starting fault.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan you find a 120cm neon tube that is not LED?\u003c\/summary\u003e\n\u003cp\u003eYes, 1.20 m fluorescent tubes still exist, in T8 in particular, for luminaires that have not been modified. They are chosen according to the length, the sockets and the colour code written on the old tube. Many luminaires switch to LED at the time of replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eA 120cm neon tube without a starter, how is it fitted?\u003c\/summary\u003e\n\u003cp\u003eA 1.20 m tube without a starter corresponds to a luminaire with an electronic ballast or to an LED tube with a direct power supply. In the first case, the tube fits like the old one. In the second, the ballast is removed and the wires repositioned: have the wiring checked if you are not sure.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"CollectionPage\",\"name\":\"120cm neon tube: choosing, replacing and installing\",\"description\":\"Which 120cm neon tube to choose between T5 and T8, fluorescent and LED? Lengths, caps, ballast, starter and replacement explained simply.\",\"url\":\"https:\/\/designix.fr\/collections\/tube-neon-120-cm\",\"isPartOf\":{\"@type\":\"WebSite\",\"name\":\"Designix\",\"url\":\"https:\/\/designix.fr\"},\"speakable\":{\"@type\":\"SpeakableSpecification\",\"cssSelector\":[\"h1\",\"h2\"]}},{\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/designix.fr\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Luminaire\",\"item\":\"https:\/\/designix.fr\/collections\/luminaire\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Tube\",\"item\":\"https:\/\/designix.fr\/collections\/tube\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"120cm neon tube: choosing, replacing and installing\",\"item\":\"https:\/\/designix.fr\/collections\/tube-neon-120-cm\"}]},{\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is the wattage of an LED neon tube?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is shown on the tube and on its packaging, never identical from one model to another. A 1.20 m LED tube consumes far less than a fluorescent tube of the same length for comparable illuminance. It is the tube label, not the power of the old one, that counts after the replacement.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between neon and LED?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Neon refers to a gas fluorescent tube, with a ballast and often a starter, whose start takes a few moments. The LED tube uses diodes, starts immediately and consumes less at comparable illuminance. Both fit on holders of the same length, but the LED tube must be compatible with the luminaire ballast.\"}},{\"@type\":\"Question\",\"name\":\"Is it possible to fit an LED neon on a standard holder?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes if the tube is stated as compatible with the holder in place. A luminaire with a starter accepts an LED tube designed for this setup, once the starter is removed. A luminaire with an electronic ballast requires a so-called ballast-compatible tube. Always check the length and the type of sockets before ordering.\"}},{\"@type\":\"Question\",\"name\":\"How can I replace a fluorescent tube with an LED tube?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Cut the power, remove the old tube with a quarter turn and note the length and the type of sockets. Choose an LED tube of the same length, compatible with the ballast or designed for a direct power supply. Reconnect, switch the breaker back on and check that no flickering appears.\"}},{\"@type\":\"Question\",\"name\":\"Is a starter needed for an LED tube?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, an LED tube does not need a starter to work. On a luminaire that has one, the starter is removed or replaced by the dummy supplied with the tube. The starter belongs to the fluorescent setup: leaving it in place with an unsuitable LED tube causes a starting fault.\"}},{\"@type\":\"Question\",\"name\":\"Can you find a 120cm neon tube that is not LED?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, 1.20 m fluorescent tubes still exist, in T8 in particular, for luminaires that have not been modified. They are chosen according to the length, the sockets and the colour code written on the old tube. Many luminaires switch to LED at the time of replacement.\"}},{\"@type\":\"Question\",\"name\":\"A 120cm neon tube without a starter, how is it fitted?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A 1.20 m tube without a starter corresponds to a luminaire with an electronic ballast or to an LED tube with a direct power supply. In the first case, the tube fits like the old one. In the second, the ballast is removed and the wires repositioned: have the wiring checked if you are not sure.\"}}]}]}\u003c\/script\u003e","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/8598\/2228\/collections\/designix-entete-tube-neon-120-cm-v1.jpg?v=1793011201","url":"https:\/\/designix-lighting.com\/collections\/120cm-neon-tube.oembed","provider":"Designix","version":"1.0","type":"link"}