{"title":"4ft fluorescent tube","description":"\u003cp\u003eCount on 1200 mm of tube, a two-pin cap and a white tone chosen for the room: these three points decide whether a 1.2m neon light fits without replacing the fixture. A 120 cm tube gives a continuous line of light, with no shadow on a worktop, in the kitchen as well as in the workshop.\u003c\/p\u003e\n\n\u003ch2 id=\"definition\"\u003eWhat is a 1.2m neon light and what light does it give?\u003c\/h2\u003e\n\u003cp\u003eA 1.2m neon light is a 120 cm long lighting tube, with linear and even light, that is mounted under a cabinet, in a kitchen or in a workshop. The LED version replaces a fluorescent tube of the same length and removes the shadow cast by the body onto the worktop.\u003c\/p\u003e\n\u003ch3\u003e1.2m LED neon light: what the tube replaces\u003c\/h3\u003e\n\u003cp\u003eThe LED tube reuses the existing fixture and lights up immediately, without the warm-up time of a fluorescent. The result remains a sharp line, useful above a fabric sample or a workbench. To compare neighbouring lengths, see \u003ca href=\"https:\/\/designix.fr\/collections\/neon-led\"\u003eour selection of LED neon lights\u003c\/a\u003e, which also gathers the longer formats.\u003c\/p\u003e\n\u003ch3\u003eDecorative neon or lighting tube: how to avoid mistakes\u003c\/h3\u003e\n\u003cp\u003eA flexible illuminated sign and a lighting tube have neither the same function nor the same fixture. The first decorates a wall, the second lights a surface. If you are looking for a wall effect, look instead at \u003ca href=\"\/collections\/applique-neon\"\u003eneon wall lights\u003c\/a\u003e; if you want to see clearly on a worktop, stay with a tube.\u003c\/p\u003e\n\n\u003ch2 id=\"remplacer\"\u003eHow to replace a fluorescent tube with a 120 cm LED tube?\u003c\/h2\u003e\n\u003cp\u003eA 1200 mm fluorescent tube is replaced by an LED tube of the same length by switching off the power, then removing the tube and its diffuser. The decisive point is the power supply: depending on the fixture, you remove the starter and adapt the ballast, or you choose a directly compatible tube.\u003c\/p\u003e\n\u003ch3\u003eRemoving the old tube without forcing\u003c\/h3\u003e\n\u003cp\u003eSwitch off the power at the circuit breaker, rotate the tube a quarter turn in its holders, then remove it. Then measure the length, the diameter and the pin spacing: this reading, more than the reference printed on the tube, is what lets you order correctly.\u003c\/p\u003e\n\u003ch3\u003eBallast and starter: what to keep, what to remove\u003c\/h3\u003e\n\u003cp\u003eThe starter is used to start a fluorescent tube: it becomes useless, and often troublesome, with an LED tube. The ballast depends on the fixture wiring and on the tube instructions. If in doubt about compatibility, it is better to have the whole checked than to force it.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccaption\u003eReplacing a 120 cm tube: what to check\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePoint\u003c\/th\u003e\n\u003cth\u003eOn the old tube\u003c\/th\u003e\n\u003cth\u003eOn the new tube\u003c\/th\u003e\n\u003cth\u003eIf not respected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e1200 mm\u003c\/td\u003e\n\u003ctd\u003e1200 mm\u003c\/td\u003e\n\u003ctd\u003eThe tube does not clip in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFormat\u003c\/td\u003e\n\u003ctd\u003eT8 or T5\u003c\/td\u003e\n\u003ctd\u003eSame format\u003c\/td\u003e\n\u003ctd\u003eDifferent diameter and pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCap\u003c\/td\u003e\n\u003ctd\u003eTwo pins\u003c\/td\u003e\n\u003ctd\u003eIdentical cap\u003c\/td\u003e\n\u003ctd\u003eNo electrical contact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStarter\u003c\/td\u003e\n\u003ctd\u003ePresent on some fixtures\u003c\/td\u003e\n\u003ctd\u003eOften unnecessary with LED\u003c\/td\u003e\n\u003ctd\u003eFlickering on start-up\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBallast\u003c\/td\u003e\n\u003ctd\u003eFluorescent wiring\u003c\/td\u003e\n\u003ctd\u003eRemoved or kept depending on the tube\u003c\/td\u003e\n\u003ctd\u003ePossible malfunction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eSwitched off\u003c\/td\u003e\n\u003ctd\u003eSwitched off\u003c\/td\u003e\n\u003ctd\u003eRisk of electric shock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 id=\"t8\"\u003eWhat is a T8 tube?\u003c\/h2\u003e\n\u003cp\u003eT8 is a tube format whose diameter is close to 26 mm, the most common on 120 cm tube fixtures. It is recognised by its two pins at each end. T5, which is thinner, does not fit the same fixture: the format must be checked before ordering.\u003c\/p\u003e\n\u003ch3\u003eT8 and T5: recognising them at a glance\u003c\/h3\u003e\n\u003cp\u003eLook at the end caps: two spaced pins on a thick body means T8; a thin, narrow body means T5. This difference in diameter prevents swapping the two families on the same fixture, even at identical length.\u003c\/p\u003e\n\u003ch3\u003eMeasure the tube, not the fixture\u003c\/h3\u003e\n\u003cp\u003eThe 1200 mm are measured pin to pin, with the tube out of the fixture. A fixture may be listed as 1.2m without the tube being exactly that. For neighbouring lengths and wall mountings, browse \u003ca href=\"\/collections\/luminaire\"\u003ethe Designix lighting catalogue\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"consommation\"\u003eWhat is the consumption of a neon light per hour?\u003c\/h2\u003e\n\u003cp\u003eHourly consumption is read from the tube power: divide the stated watts by 1000 to get kWh per hour. A 120 cm tube therefore consumes less the more it is LED rather than fluorescent, and the total depends above all on the number of hours it is switched on each day.\u003c\/p\u003e\n\u003ch3\u003eHow to calculate the consumption of a 120 cm tube\u003c\/h3\u003e\n\u003cp\u003eRead the power in watts on the label, divide by 1000, multiply by the number of hours of use. A tube switched on two hours a day does not weigh the same as a tube left on all day in a workshop. The bill follows duration as much as power.\u003c\/p\u003e\n\u003ch3\u003ePower or lighting duration: what weighs most\u003c\/h3\u003e\n\u003cp\u003eDoubling the lighting duration counts more than switching from one model to another within the same family. So compare tubes with equivalent luminous efficiency rather than by stated power alone, and look at \u003ca href=\"\/collections\/neon-led\"\u003e120 cm and 150 cm LED neon tubes\u003c\/a\u003e to place the sizes.\u003c\/p\u003e\n\n\u003ch2 id=\"panne\"\u003eHow to know whether to change the neon light or the starter?\u003c\/h2\u003e\n\u003cp\u003eA tube that blackens at the ends, flickers then goes out or takes time to start is often the tube itself. A rapid flicker on start-up, with a recent tube, points more to the starter. The simplest is to replace the tube first, then the starter if the fault persists.\u003c\/p\u003e\n\u003ch3\u003eThe signs that point to the tube\u003c\/h3\u003e\n\u003cp\u003eGrey or black ends, light that dims, laborious start-up after a few minutes: the tube is reaching the end of its life. It is the first part to change, because it wears out and can be removed without tools.\u003c\/p\u003e\n\u003ch3\u003eThe signs that point to the starter\u003c\/h3\u003e\n\u003cp\u003eA sharp, regular flicker, with a new tube in place, points to the starter. It comes out of its housing without any special tool. If the fault survives replacement of both, the fixture power supply should be checked.\u003c\/p\u003e\n\n\u003ch2 id=\"pieces\"\u003eWhich 1.2m neon light to choose for the kitchen, bathroom or bedroom?\u003c\/h2\u003e\n\u003cp\u003eIn the kitchen, the tube is placed above the worktop for light without shadow. In a bathroom, the protection rating counts more than the tone, because of humidity. In a bedroom, an indirect light and a warm tone are preferred, gentler on waking.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccaption\u003eWhich 1.2m neon light for which room\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRoom or use\u003c\/th\u003e\n\u003cth\u003eWhat is lit\u003c\/th\u003e\n\u003cth\u003eWhite tone\u003c\/th\u003e\n\u003cth\u003eProtection rating\u003c\/th\u003e\n\u003cth\u003ePoint to watch\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eKitchen\u003c\/td\u003e\n\u003ctd\u003eWorktop, splashback\u003c\/td\u003e\n\u003ctd\u003eNeutral to cool\u003c\/td\u003e\n\u003ctd\u003eStandard in dry areas\u003c\/td\u003e\n\u003ctd\u003eAvoid body shadow on the worktop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBathroom\u003c\/td\u003e\n\u003ctd\u003eMirror, vanity unit\u003c\/td\u003e\n\u003ctd\u003eNeutral\u003c\/td\u003e\n\u003ctd\u003eHigh near water points\u003c\/td\u003e\n\u003ctd\u003eHumidity requires a suitable rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBedroom\u003c\/td\u003e\n\u003ctd\u003eIndirect lighting, headboard\u003c\/td\u003e\n\u003ctd\u003eWarm\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eNo bare tube in line with the bed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOffice, workshop\u003c\/td\u003e\n\u003ctd\u003eWorktop, workbench\u003c\/td\u003e\n\u003ctd\u003eNeutral to cool\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eExtend the tube to avoid shadows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDressing room, cupboard\u003c\/td\u003e\n\u003ctd\u003eWardrobe, shelves\u003c\/td\u003e\n\u003ctd\u003eNeutral\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003ePlace in front of clothes, not above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCellar, garage\u003c\/td\u003e\n\u003ctd\u003eCirculation\u003c\/td\u003e\n\u003ctd\u003eCool\u003c\/td\u003e\n\u003ctd\u003eStandard to reinforced\u003c\/td\u003e\n\u003ctd\u003eCheck the humidity of the room\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eKitchen neon light: lighting the worktop\u003c\/h3\u003e\n\u003cp\u003eA 120 cm tube covers a good part of a standard worktop. Place it in front of the upper cabinet, on the user side, so that your shadow does not fall on the chopping area. The \u003ca href=\"\/collections\/neon-cuisine\"\u003ekitchen neon collection\u003c\/a\u003e details under-cabinet mountings.\u003c\/p\u003e\n\u003ch3\u003eBathroom and bedroom neon light: protection rating before tone\u003c\/h3\u003e\n\u003cp\u003eNear a sink, the protection rating comes before aesthetics. For a bathroom mirror, a \u003ca href=\"\/collections\/applique-murale-neon\"\u003eneon wall light for bathrooms\u003c\/a\u003e often avoids a ceiling mounting. In a bedroom, look for indirect light: \u003ca href=\"\/collections\/applique-neon\"\u003ea neon wall light\u003c\/a\u003e sends light towards the wall and softens the atmosphere.\u003c\/p\u003e\n\n\u003ch2 id=\"installer\"\u003eHow to install and maintain a 1.2m neon light?\u003c\/h2\u003e\n\u003cp\u003eA 120 cm tube is fixed with clips or brackets screwed into the fixture, never into empty space: the weight is spread over the whole length. Switch off the power before any handling, remove the tube by rotating it a quarter turn, and clean it dry.\u003c\/p\u003e\n\u003ch3\u003eFixing a 120 cm tube without bending it\u003c\/h3\u003e\n\u003cp\u003eIdentify two solid support points, screw the clips into the cabinet material, then clip the tube in by engaging both ends at the same time. A tube resting on one side only works loose and eventually comes out of its housing.\u003c\/p\u003e\n\u003ch3\u003eCleaning a tube without damaging the contacts\u003c\/h3\u003e\n\u003cp\u003eDust dry, with a soft cloth, without product on the pins. A tube that crackles after cleaning has received moisture in its contacts: let it dry before switching it back on. For a vertical mounting, compare with \u003ca href=\"\/collections\/applique-murale-neon\"\u003ea neon wall light\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"accorder\"\u003eHow to match several 1.2m neon lights in the same room?\u003c\/h2\u003e\n\u003cp\u003eSeveral 120 cm tubes are aligned on the same line to give continuous lighting, with regular spacing between each. Keep the same white tone from one tube to another, otherwise the difference shows on the walls, and complete with a wall light when the room lacks vertical light.\u003c\/p\u003e\n\u003ch3\u003eAligning the tubes on a single line\u003c\/h3\u003e\n\u003cp\u003eDraw an axis in pencil before screwing, space evenly, and order the tubes in the same tone. Two different whites on the same wall produce a visible break, even a few kelvins apart. For long lengths, see \u003ca href=\"\/collections\/neon-led\"\u003e120 cm LED neon lights\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eCeiling tube and wall light: the right duo\u003c\/h3\u003e\n\u003cp\u003eThe tube handles horizontal light, the wall light brings the vertical. This duo works well in a dressing room or a wide hallway. Look at \u003ca href=\"\/collections\/applique-neon\"\u003edecorative neon wall lights\u003c\/a\u003e and \u003ca href=\"\/collections\/neon-cuisine\"\u003eunder-cabinet kitchen neon lights\u003c\/a\u003e to compose without multiplying ceiling sources.\u003c\/p\u003e\n\n\u003ch2 id=\"teintes\"\u003eWhich colour temperature to choose for a 120 cm tube?\u003c\/h2\u003e\n\u003cp\u003eChoose the tone according to what you are lighting, not by taste alone: a white that is too cool above a bed is tiring, a white that is too warm on a worktop makes colours look wrong. The references below are usual orders of magnitude in the trade.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccaption\u003eColour temperatures and use\u003c\/caption\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eTone\u003c\/th\u003e\n\u003cth\u003eOrder of magnitude\u003c\/th\u003e\n\u003cth\u003eWhere to use it\u003c\/th\u003e\n\u003cth\u003eRendering\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarm white\u003c\/td\u003e\n\u003ctd\u003eAround 3000 K\u003c\/td\u003e\n\u003ctd\u003eBedroom, living room, indirect lighting\u003c\/td\u003e\n\u003ctd\u003eGolden light, cosy atmosphere\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeutral white\u003c\/td\u003e\n\u003ctd\u003eAround 4000 K\u003c\/td\u003e\n\u003ctd\u003eKitchen, bathroom, office\u003c\/td\u003e\n\u003ctd\u003eWhite close to daylight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCool white\u003c\/td\u003e\n\u003ctd\u003eAbove 5000 K\u003c\/td\u003e\n\u003ctd\u003eWorkshop, garage, cellar\u003c\/td\u003e\n\u003ctd\u003eVery white, contrasted light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eA blue or coloured neon light is a matter of decoration rather than useful lighting: it does not replace a white tube in a work room. To find all the families, go through \u003ca href=\"\/collections\/luminaire\"\u003eall our lighting fixtures\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2 id=\"faq\"\u003eFrequently asked questions about the 1.2m neon light\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs it possible to replace a neon tube with an LED tube?\u003c\/summary\u003e\n\u003cp\u003eYes, provided you keep the same length, the same tube format and the same cap as the old one. The LED tube fits the existing fixture once the power supply is adapted: on a fixture with a starter, the starter is generally removed. The result is immediate lighting, without flicker.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow to fit an LED neon light on an old fixture?\u003c\/summary\u003e\n\u003cp\u003eSwitch off the power, remove the old tube, then check three things: the length, the diameter and the shape of the cap. If these three points match, the new tube clips in. The power supply still has to be handled depending on the fixture, starter or ballast, then the lighting tested before closing the diffuser.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs a starter necessary for an LED tube?\u003c\/summary\u003e\n\u003cp\u003eGenerally no, and it is better to remove it: a starter designed for a fluorescent tube disrupts the start-up of an LED tube and can cause flickering. Some fixtures have none at all. The instruction is on the instructions of the tube purchased, and that is what counts.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow to wire an LED neon light without a starter?\u003c\/summary\u003e\n\u003cp\u003eSwitch off the power at the circuit breaker, access the fixture and remove the starter from its housing, then put the tube back in place. On a mounting with a ballast, the tube must be compatible with this mounting, otherwise the ballast is removed. A lighting test validates the installation.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow much does a 1.2m neon light cost?\u003c\/summary\u003e\n\u003cp\u003eThe budget depends on the format, the white tone, the diffusion quality and the level of luminous efficiency. An entry-level tube and a high-efficiency model are not in the same range. The collection currently has no products: the budget is consulted directly in the price grid.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003ch2 id=\"commander\"\u003eOrdering a 1.2m neon light from Designix\u003c\/h2\u003e\n\u003cp\u003eBefore validating, note the three measurements of the existing fixture: length pin to pin, tube diameter, pin spacing. This reading avoids the most frequent back-and-forth. For a complete project, complete the tube with \u003ca href=\"\/collections\/luminaire\"\u003eall the lighting fixtures\u003c\/a\u003e and with \u003ca href=\"\/collections\/applique-neon\"\u003eneon wall lights\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSecure payment, tracked delivery, returns and Designix customer service: the four points are assured on every order, and the team answers before purchase if any doubt remains about the compatibility of the tube.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"CollectionPage\",\"name\":\"1.2m neon light: the guide to choosing and fitting your 120 cm tube\",\"description\":\"1.2m neon light: understanding the 120 cm tube, choosing between T5 and T8, replacing a fluorescent, wiring without a starter and lighting a kitchen or bathroom.\",\"url\":\"https:\/\/designix.fr\/collections\/neon-1m20\",\"isPartOf\":{\"@type\":\"WebSite\",\"name\":\"Designix\",\"url\":\"https:\/\/designix.fr\"},\"speakable\":{\"@type\":\"SpeakableSpecification\",\"cssSelector\":[\"h1\",\"h2\"]}},{\"@type\":\"BreadcrumbList\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/designix.fr\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Lighting\",\"item\":\"https:\/\/designix.fr\/collections\/luminaire\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Neon\",\"item\":\"https:\/\/designix.fr\/collections\/neon\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"1.2m neon light: the guide to choosing and fitting your 120 cm tube\",\"item\":\"https:\/\/designix.fr\/collections\/neon-1m20\"}]},{\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is it possible to replace a neon tube with an LED tube?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, provided you keep the same length, the same tube format and the same cap as the old one. The LED tube fits the existing fixture once the power supply is adapted: on a fixture with a starter, the starter is generally removed. The result is immediate lighting, without flicker.\"}},{\"@type\":\"Question\",\"name\":\"How to fit an LED neon light on an old fixture?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Switch off the power, remove the old tube, then check three things on the fixture: the length, the tube diameter and the shape of the cap. If these three points match, the new tube clips in. The power supply still has to be handled depending on the type of fixture, starter or ballast.\"}},{\"@type\":\"Question\",\"name\":\"Is a starter necessary for an LED tube?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Generally no, and it is better to remove it: a starter designed for a fluorescent tube disrupts the start-up of an LED tube and can cause flickering. Some fixtures have none at all. The instruction is on the instructions of the tube purchased, and that is what counts.\"}},{\"@type\":\"Question\",\"name\":\"How to wire an LED neon light without a starter?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Switch off the power at the circuit breaker, access the fixture and remove the starter from its housing, then put the tube back in place. On a mounting with a ballast, the tube must be compatible with this mounting, otherwise the ballast is removed. A lighting test validates the installation.\"}},{\"@type\":\"Question\",\"name\":\"How can I replace a fluorescent tube with an LED tube?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The process has four steps: measure the existing tube and note its format and cap, choose an equivalent LED tube, switch off the power and remove it, then refit while adapting the power supply. The same fixture is kept and the lighting is checked before closing the diffuser.\"}},{\"@type\":\"Question\",\"name\":\"How much does a 1.2m neon light cost?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The price depends on the format, the white tone, the diffusion quality and the level of luminous efficiency. An entry-level tube and a high-efficiency model are not in the same budget range, and the current price is shown on each product page of the collection.\"}}]}]}\u003c\/script\u003e","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/8598\/2228\/collections\/designix-entete-neon-1m20-v1.jpg?v=1793284507","url":"https:\/\/designix-lighting.com\/collections\/1-2m-neon-light.oembed","provider":"Designix","version":"1.0","type":"link"}